Modification History
Release 6. Update to first aid elective.
Release 5. Two low use units removed from elective bank as determined at December 2020 AISC meeting in response to Skills Ministers’ objectives. Equivalent.
Release 4. Imported units updated to current versions. Equivalent.
Release 3. Imported units updated to current versions. Equivalent.
Release 2. Imported units updated to current versions. Equivalent.
Release 1. Units updated. Supersedes and is equivalent to Supersedes MSA20107 Certificate II in Process Manufacturing.
Qualification Description
The MSM20116 Certificate II in Process Manufacturing provides the competencies required by competent production workers who undertake vital production support roles directly related to producing products. Production workers apply a breadth and depth of knowledge to a defined range of situations and would be expected to apply this knowledge to solve a defined range of problems by applying known solutions to a limited range of predictable problems.
This qualification has been developed for use across the three process manufacturing sectors:
- chemical, hydrocarbons and refining
- plastics, rubber and cablemaking
- manufactured mineral products.
Entry Requirements
There are no entry requirements for this qualification.
Packaging Rules
|
To be awarded the MSM20116 Certificate II in Process Manufacturing, competency must be achieved in fourteen (14) units of competency:
Note : Where prerequisite units are identified they must be counted in the total number of units required for achievement of the qualification. |
||
|
Core units |
||
|
Unit code |
Unit title |
|
|
MSMENV272 |
Participate in environmentally sustainable work practices |
|
|
MSMWHS200 |
Work safely |
|
|
MSMSUP210 |
Process and record information |
|
|
Elective units |
||
|
Unit code |
Unit title |
Prerequisites |
|
FWPCOT2238 |
Cut materials with a hand-held chainsaw |
|
|
MSTGN3009 |
Coordinate work of team or section |
|
|
HLTAID011 |
Provide first aid |
|
|
MEM16006A |
Organise and communicate information |
|
|
MEM16007A |
Work with others in a manufacturing, engineering or related environment |
|
|
MEM16008A |
Interact with computing technology |
|
|
MEM18001C |
Use hand tools |
|
|
MEM18002B |
Use power tools/hand held operations |
|
|
MSMENV172 |
Identify and minimise environmental hazards |
|
|
MSMOPS100 |
Use equipment |
|
|
MSMOPS101 |
Make measurements |
|
|
MSMOPS102 |
Perform tasks to support production |
|
|
MSMOPS200 |
Operate equipment |
|
|
MSMOPS212 |
Use organisation computers or data systems |
|
|
MSMOPS244 |
Lay out and cut materials |
|
|
MSMPER200 |
Work in accordance with an issued permit |
|
|
MSMPER201 |
Monitor and control work permits |
|
|
MSMPER202 |
Observe permit work |
|
|
MSMPER205 |
Enter confined space |
MSMPER200 |
|
MSMSUP100 |
Apply workplace context to own job |
|
|
MSMSUP101 |
Clean workplace or equipment |
|
|
MSMSUP106 |
Work in a team |
|
|
MSMSUP200 |
Achieve work outcomes |
|
|
MSMSUP204 |
Pack products or materials |
|
|
MSMSUP205 |
Transfer loads |
|
|
MSMSUP230 |
Monitor process operations |
|
|
MSMSUP240 |
Undertake minor maintenance |
|
|
MSMSUP273 |
Handle goods |
|
|
MSMSUP280 |
Manage conflict at work |
|
|
MSMSUP291 |
Participate in continuous improvement |
|
|
MSMSUP292 |
Sample and test materials and product |
|
|
MSMWHS100 |
Follow WHS procedures |
|
|
MSMWHS110 |
Follow emergency response procedures |
|
|
MSMWHS201 |
Conduct hazard analysis |
|
|
MSMWHS205 |
Control minor incidents |
|
|
MSMWHS210 |
Undertake first response to non-fire incidents |
|
|
MSMWHS212 |
Undertake first response to fire incidents |
|
|
MSMWHS216 |
Operate breathing apparatus |
|
|
MSMWHS217 |
Gas test atmospheres |
|
|
MSMWHS218 |
Control the risks of falls |
|
|
MSS402002 |
Sustain process improvements |
|
|
MSS402020 |
Apply quick changeover procedures |
|
|
MSS402021 |
Apply Just in Time procedures |
|
|
MSS402082 |
Apply cost factors to work practices |
|
|
MSS402040 |
Apply 5S procedures |
|
|
MSS402050 |
Monitor process capability |
|
|
MSS402051 |
Apply quality standards |
|
|
MSS402083 |
Use planning software systems in operations |
|
|
MSS402080 |
Undertake root cause analysis |
|
|
PMBHAN103 |
Shift materials safely by hand |
|
|
TLID2010 |
Operate a forklift |
|
|
Elective units may also be chosen from the Group A or Group B units in PMA20116, PMB20107 and PMC20110. A maximum of four (4) relevant units may be selected from this Training Package, other endorsed Training Packages and accredited courses, where those units are packaged in a Certificate II or III. Note: a maximum of two (2) units may be chosen from a Certificate III. |
||
Qualification Mapping Information
Release 6. Update to first aid elective unit. Supersedes and is equivalent to (Release 5).
Release 5. Two low use units removed from elective bank as determined at December 2020 AISC meeting in response to Skills Ministers’ objectives. Equivalent.
Release 4. Imported units updated to current versions. Equivalent.
Release 3. Imported units updated to current versions. Equivalent.
Release 2. Imported units updated to current versions. Equivalent.
Release 1. Units updated. Supersedes and is equivalent to Supersedes MSA20107 Certificate II in Process Manufacturing.
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=d1287d36-dff4-4e9f-ad2c-9d6270054027
