Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Work instructions are used to determine job requirements, including design, quality, materials, equipment and quantities

1.2

Cutting list and job specifications are read and interpreted

1.3

Work health and safety (WHS) requirements, including ventilation requirements and personal protection needs, are observed throughout the work

1.4

Material for machining is selected and inspected for quality

1.5

Cutting patterns are applied to minimise waste material

1.6

Procedures are identified for maximising energy efficiency while completing the job

2

Set up machines

2.1

Safety equipment, including emergency stops, gauges, guards and controls are checked

2.2

Machine settings and adjustments are made in accordance with job requirements and machine and tool manufacturer instructions

2.3

Machines, cutting tools and jigs are identified and checked for safe and effective operation

2.4

Trial runs are conducted to check machine operation, accuracy and quality of finished work

2.5

Necessary adjustments are made to machine settings

3

Apply conversion techniques

3.1

Machine start-up procedure is carried out in accordance with manufacturer instructions

3.2

Material is fed/placed into machine in accordance with manufacturer instructions, safe handling procedures and standard workplace operating procedures

3.3

Machine is operated in accordance with its designed capacity and purpose, tooling requirements and to manufacturer recommendations

3.4

Machine operation is monitored to ensure product quality and output

3.5

Waste quantities are checked and minimised

3.6

Items that do not meet quality requirements are repaired, recycled or discarded according to workplace procedures

3.7

Problems with the required work and/or the operation of the machine are identified and reported to appropriate persons

4

Finalise operation and maintain equipment

4.1

Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures

4.2

Machinery is cleaned and left in a safe mode

4.3

Faulty and/or defective equipment is tagged and reported in accordance with workplace practices

4.4

Unused hardware is collected and stored for re-use or disposal following workplace procedures

4.5

Waste and scrap materials are dealt with following workplace procedures

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Products of conversion techniques include: 

• end panels
• shelving
• bench tops
• backs
• bottoms
• doors and fixing rails

Machines include: 

• panel saw with scoring blade
• numerically controlled (NC) beam saw and wall saw

Unit context includes: 

• WHS requirements, including legislation, building codes, material safety management systems, hazardous substances and dangerous goods code, and local safe operating procedures
• work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
• work requires individuals to demonstrate some discretion, judgement and problem solving in the set up, operation and maintenance of machines
• competency may be demonstrated in workplaces involved in the production of manufactured board domestic furniture, commercial furniture, kitchen and bathroom cabinets and/or components

Tools and equipment include: 

• measuring devices
• machine associated tools
• materials handling equipment/lifting devices

Manufactured board includes: 

• raw board
• melamine surfaces
• veneered board
• plywood and hard board

Personal protective equipment includes: 

• that prescribed under legislation, regulations and enterprise policies and practices

Information and procedures include: 

• workplace procedures relating to the use of tools and equipment
• work instructions, including job sheets, cutting lists, plans, drawings and designs
• workplace procedures relating to reporting and communication
• manufacturer specifications and operational procedures