Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Workplace information, including materials application and safety information, and material safety data sheets (MSDS), is used to inform work practices

1.2

Characteristics of the surface and the required surface treatment are identified from work orders or instructions

1.3

Processing and application techniques, time and safety requirements are identified and used for work planning

1.4

Work health and safety (WHS) requirements, including ventilation requirements and personal protection needs, are observed throughout the work

1.5

Tools, equipment and accessories are identified and checked for safe and effective operation for the task

2

Prepare for application of materials

2.1

Surfaces are checked for contamination and correct preparation according to workplace procedures and standards

2.2

Products with surface or other faults are identified and faults repaired as appropriate

2.3

Materials required to complete the task are identified and prepared

2.4

Trial applications of material are made to check equipment operation, materials consistency, viscosity and sample match

2.5

Faults and or inconsistencies in colour and surface appearance are identified and workplace procedures for rectification and adjustment are followed

3

Apply finishing materials

3.1

Techniques for application of graining solution and other finishes are identified

3.2

Materials are applied according to job instructions, manufacturer specifications and workplace procedures

3.3

Finished products are inspected and approved for suitability for further processing

3.4

Products which do not meet quality specifications are rectified or tagged for further investigation

4

Clean work area and maintain equipment

4.1

Equipment used is cleaned and inspected for serviceable condition and stored appropriately

4.2

Unserviceable equipment is tagged, faults are identified and appropriate personnel are informed

4.3

Work area is cleaned and returned to approved condition, and all areas used for bleaching are washed down with water

4.4

Workplace records are completed

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes: 

• WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent
• work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
• work requires individuals to demonstrate some discretion, judgement and problem solving in the application of surface coatings

Graining and decorative finishes include: 

• ragging
• stippling
• ageing
• distressing
• others

Surfaces include: 

• solid timber
• manufactured board
• metal

Tools and equipment include: 

• liquid containers
• rubber gloves
• face masks
• spray booths
• spray guns
• compressor
• air lines
• brushes
• sanding block
• brushes
• graining tools

Materials include: 

• water
• abrasive papers
• cotton rags
• hessian
• lacquer-based wiping stain
• polyurethane wiping stain
• spirit stain
• pigment oil stain
• proprietary brand stains
• pigments
• acrylic paint
• enamel

Personal protective equipment includes: 

• that prescribed under legislation, regulations and enterprise policies and practices

Information and procedures include: 

• workplace procedures relating to the use of tools and equipment
• work instructions, including job sheets, cutting lists, plans, drawings and designs
• workplace procedures relating to reporting and communication
• manufacturer specifications and operational procedures