^
 
 

Unit of competency details

MSFFF2001 - Use furniture finishing sector hand and power tools (Release 1)

Summary

Usage recommendation:
Superseded
Mapping:
MappingNotesDate
Supersedes and is equivalent to LMFFF2001B - Use furniture finishing sector hand and power toolsSupersedes and is equivalent to LMFFF2001B Use furniture finishing sector hand and power tools 09/Dec/2013
Is superseded by and equivalent to MSFFF2009 - Use furniture finishing hand and power tools 07/Dec/2022

Releases:
ReleaseRelease date
1 1 (this release) 10/Dec/2013

Companion volumes:
Unit of competency Assessment requirements

Delivery:
Find RTOs approved to deliver this unit of competency.

Training packages that include this unit

Qualifications that include this unit

Classifications

SchemeCodeClassification value
ASCED Module/Unit of Competency Field of Education Identifier 030717 Plant And Machine Operations  

Classification history

SchemeCodeClassification valueStart dateEnd date
ASCED Module/Unit of Competency Field of Education Identifier 030717 Plant And Machine Operations  02/May/2014 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Content

Compare:
Compare content of this unit of competency with other releases or training components
Download:

Unit of competency

Modification History

Release 1 - New unit of competency

Application

This unit of competency covers using hand and power tools, and basic static machines, in applications relating to the furniture finishing sector of the furnishing industry.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

Pre-requisite Unit

Competency Field

Unit Sector

Furniture finishing

Elements and Performance Criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Identify hand and power tools, and basic static machines

1.1

Types of hand and power tools, and basic static machines and their functions are identified

1.2

Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work

1.3

Sources of power supply are recognised

2

Select and use hand tools

2.1

Hand tools selected are consistent with needs of the job

2.2

Selected hand tools are checked for serviceability and safety and any faults reported to supervisor

2.3

Equipment is selected to hold or support material for hand tool application, where applicable

2.4

Material is located and held in position for hand tool application

2.5

Hand tools are safely and effectively used according to their intended use

2.6

Hand tools are safely located when not in immediate use

3

Select and use power tools and basic static machines

3.1

Power tools and basic static machines are selected consistent with needs of the job in accordance with conventional work practice

3.2

Power tools and basic static machines are visually checked for serviceability/safety in accordance with WHS requirements and any faults reported to supervisor

3.3

Equipment is selected to hold or support materials for application as applicable

3.4

Material is located and held in position for power tool and/or machining applications as applicable

3.5

Power tools and basic static machines are safely and effectively used in application processes

3.6

Power tools are safely located when not in use

4

Clean up work area and tools

4.1

All tools are cleaned, maintained and stored

4.2

Equipment is cleaned, maintained and stored

4.3

Work area is cleared and waste removed

Foundation Skills

Foundation skills essential to performance are explicit in the performance criteria of this unit of competency. Detail on appropriate performance levels for each furnishing unit of competency in reading, writing, oral communication and numeracy utilising the Australian Core Skills Framework (ACSF) are provided in the Furnishing Training Package Implementation Guide.

Range of Conditions

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Hand tools for furniture finishing include: 
  • cabinet scraper
  • chisel
  • hammer
  • nail punch
  • cork sanding block
  • putty knife
  • paint scraper
  • paint brush
  • blender
  • mop brush
  • swooge
  • pencil brush
  • file
  • oil stone

  • polish rubbers
  • clamps
  • screwdrivers
  • rubber mallet
  • spokeshave
  • pliers
  • pincers
  • spanners

Power tools for furniture finishing include: 
  • orbital sander
  • steam iron
  • spray gun
  • compressor

Fixed/static machinery for furniture finishing include: 
  • belt/stroke sander
  • compressor

Fault reporting includes: 
  • verbal or written reporting

Personal protective equipment includes: 
  • that prescribed under legislation, regulations and enterprise policies and practices

Information and procedures include: 
  • workplace procedures relating to the use of tools and equipment
  • work instructions, including job sheets, cutting lists, plans, drawings and designs
  • workplace procedures relating to reporting and communication
  • manufacturer specifications and operational procedures

Unit Mapping Information

Supersedes and is equivalent to LMFFF2001B Use furniture finishing sector hand and power tools

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=0601ab95-583a-4e93-b2d4-cfb27b03ed73

 

Assessment requirements

Modification History

Release 1 - New unit of competency

Performance Evidence

  • Interpret work order and locate and apply relevant information
  • Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
  • Identify materials used in the work process
  • Follow work instructions, operating procedures and inspection processes to:
  • minimise the risk of injury to self or others
  • prevent damage to goods, equipment and products
  • maintain required production output and product quality
  • Select, safely use, clean and maintain the suite of hand and power tools, and static machines used in furniture finishing
  • Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements
  • Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures
  • Minimise wastage of resources, including materials, time and money
  • Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Knowledge Evidence

  • Types, characteristics, uses, limitations and maintenance requirements of hand tools commonly used in furniture finishing operations
  • Types, characteristics, uses, limitations and maintenance requirements of power tools and basic static machines commonly used in furniture finishing operations
  • WHS requirements and legislation
  • Work flow within the workplace

Assessment Conditions

  • Assessors must:
  • hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors
  • have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification
  • be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.
  • Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.
  • Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.
  • Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.
  • Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.
  • Access is required to furniture polishing sector hand and power tools, and basic static machines and materials used in the finishing of furniture.

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=0601ab95-583a-4e93-b2d4-cfb27b03ed73

Back to top