Modification History
Release 2. One low use unit removed from elective bank as determined at December 2020 AISC meeting in response to Skills Ministers' objectives. Supersedes and is equivalent to to MSF30919 Certificat III in Blinds, Awnings, Security Screens and Grilles.
Release 1. Supersedes but is not equivalent to MSF30913 Certificate III in Blinds, Awnings, Security Screens and Grilles.
Qualification Description
This qualification describes the skills and knowledge required to estimate, fabricate, assemble and install blinds, awnings, shade sails, shutters, and screens and grilles using a range of materials, fixtures and fittings.
Work is usually performed in a defined range of skilled operations, where a range of methods, tools, materials and information are used to complete routine activities. Discretion and judgement are required in selecting equipment, services and contingency measures and resolving mostly predictable problems within known time constraints.
Licensing applies in some jurisdictions for the installation of blinds, awnings, shade sails, shutters, security screens and grilles. Local regulations should be checked for details.
Entry Requirements
There are no entry requirements for this qualification.
Packaging Rules
Total number of units = 18
- 5 core units
- 13 elective units, consisting of:
- at least 8 units from Group A, Group B and Group C
- up to 5 units from Group D and remaining Group A*, Group B and Group C units
- up to three units from any endorsed Training Package or accredited course provided these units are relevant to the work outcome and were first packaged in a Certificate II level qualification or higher.
Units selected from other Training Packages and accredited courses must be relevant to the qualification outcome and not duplicate units available in this qualification.
If units of competency selected have prerequisite units, these prerequisite units must also be selected as part of completion of this qualification.
Packaging for specialisations
Electives may be packaged to provide a qualification with a specialisation.
At least 5 Group A electives must be selected for award of MSF30919 Certificate III in Blinds, Awnings, Security Screens and Grilles (Fabrication and Assembly)
At least 5 Group B electives must be selected for award of MSF30919 Certificate III in Blinds, Awnings, Security Screens and Grilles (Installation)
At least 5 Group C electives must be selected for award of MSF30919 Certificate III in Blinds, Awnings, Security Screens and Grilles (Estimating Detailing)
CORE UNITS
Unit code |
Unit title |
BSBFLM303 |
Contribute to effective workplace relationships |
BSBPRO401 |
Develop product knowledge |
MSFGN2001 |
Make measurements and calculations |
MSFGN3001 |
Read and interpret work documents |
MSMWHS200 |
Work safely |
ELECTIVE UNITS
Group A: Fabrication and Assembly
Unit code |
Unit title |
Prerequisite unit |
MEM18001C |
Use hand tools |
|
MEM18002B |
Use power tools/hand held operations |
|
MEM20003A |
Install and upgrade locks and hardware |
MEM18001C Use hand tools MEM18002B Use power tools/hand held operations |
MEM20005A |
Install and maintain door control devices/systems |
MEM18001C Use hand tools MEM18002B Use power tools/hand held operations |
MSFBA2011 |
Select and apply hardware and fixings for blinds, awnings, screens and grilles |
|
MSFBA3011 |
Assemble awnings |
|
MSFBA3012 |
Assemble interior blinds |
|
MSFBA3014 |
Assemble pelmets |
|
MSFBA3019 |
Assemble roller shutters |
|
MSFBA3021 |
Assemble louvre shutters |
|
MSFDN4003 |
Produce patterns and templates |
|
MSFFM2010 |
Set up and operate basic static machines |
|
MSFFM3010 |
Prepare cutting list from plans and job specifications |
|
MSFFM3021 |
Set up, operate and maintain computer numerically controlled (CNC) sizing machines |
|
MSFFM3022 |
Set up, operate and maintain computer numerically controlled (CNC) machining and processing centres |
|
MSFGG2016 |
Assemble glazing products |
|
MSFGG3028 |
Select, cut and process materials for glazing products |
|
MSFSF3014 |
Construct Roman-style blinds |
|
MSFSS3005 |
Assemble non-security and security screens and grilles |
|
MSS402081 |
Contribute to the application of a proactive maintenance strategy |
|
MSS403087 |
Mistake proof an operational process |
|
MSTGN3016 |
Plan tasks to assist production operations |
Group B: Installation
Unit code |
Unit title |
Prerequisite unit |
AHCLSC308 |
Install metal structures and features |
|
CPCCWHS2001 |
Apply WHS requirements, policies and procedures in the construction industry |
|
CPCCSH2003A |
Apply and install sealant and sealant devices |
CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry |
CPCCWHS1001 |
Prepare to work safely in the construction industry |
|
CPPSEC2022 |
Install electronic locks and locking systems |
|
MSFBA3015 |
Install louvre shutters |
|
MSFBA3016 |
Install awnings |
|
MSFBA3017 |
Install interior blinds |
|
MSFBA3020 |
Install roller shutters |
|
MSFFDT3001 |
Install low-voltage technology, automation, and intelligent management systems in furnishing |
|
MSFGG3034 |
Install residential windows and doors |
|
MSFSS3004 |
Install non-security and security screens and grilles |
|
MSTGN2005 |
Perform minor maintenance |
|
MSTTF3001 |
Identify client and site requirements for installation of fabricated textile products |
Group C: Estimating Detailing
Unit code |
Unit title |
Prerequisite unit |
BSBADM311 |
Maintain business resources |
|
BSBCUS301 |
Deliver and monitor a service to customers |
|
BSBITU306 |
Design and produce business documents |
|
BSBPRO301 |
Recommend products and services |
|
MSFBA3018 |
Assess suitability of blinds and awnings |
|
MSFGN3002 |
Estimate and cost job |
|
MSFGN3003 |
Advise customers on products and services |
|
MSFGN3004 |
Resolve quality and compliance issues |
|
MSTTF3002 |
Gain customer acceptance of service proposal |
Group D: General
Unit code |
Unit title |
Prerequisite unit |
BSBFLM309 |
Support continuous improvement systems and processes |
|
BSBINN201 |
Contribute to workplace innovation |
|
CPCCCA3010 |
Install windows and doors |
CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry |
CPCCCM2002 |
Carry out excavation |
CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry |
CPCCCO2013 |
Carry out concreting to simple forms |
CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry |
CPCCCM3001 |
Operate elevated work platforms up to 11 metres |
|
MSFGN2002 |
Move and store materials and products |
|
MSFGN4001 |
Research and meet ethical and compliance requirements |
|
MSFSF2015 |
Cut single layer fabrics |
|
MSTTF2002 |
Cut, bend and shape metal |
|
MSTTF2005 |
Translate information into measurements or diagrams |
|
MSTTF2014 |
Weld plastic materials |
|
MSTTF2015 |
Install products on and off site |
|
MSTTF3004 |
Perform advanced welding of plastic materials |
MSTTF2014 Weld plastic materials |
MSTTX2014 |
Perform industrial sewing on textile products |
|
TLIA0020 |
Package goods |
|
TLIA0023 |
Receive goods |
|
TLIA0019 |
Despatch stock |
|
TLIA3016 |
Use inventory systems to organise stock control |
|
TLID0021 |
Store and handle dangerous goods and hazardous substances |
Qualification Mapping Information
Release 2. One low use unit removed from elective bank as determined at December 2020 AISC meeting in response to Skills Ministers' objectives. Supersedes and is equivalent to to MSF30919 Certificat III in Blinds, Awnings, Security Screens and Grilles.
Release 1. Supersedes but is not equivalent to MSF30913 Certificate III in Blinds, Awnings, Security Screens and Grilles.
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=0601ab95-583a-4e93-b2d4-cfb27b03ed73