Modification History
Release 1 - New qualification
Qualification Description
This qualification describes the skills and knowledge required to prepare design requirements for framing and use mouldings and mat to frame pictures, artwork, and textiles, including use of glass and glazing materials, where required.
There are no specific licences that relate to this qualification. However, depending on the jurisdiction, licensing or regulatory requirements may apply to the use of some units in this qualification. Local regulations should be checked for details.
Entry Requirements
Not applicable
Packaging Rules
To be awarded the MSF30513 Certificate III in Picture Framing, competency must be achieved in twenty-one (21) units of competency.
- fourteen (14) core units of competency
- seven (7) elective units of competency.
Note: Units marked with an asterisk have one or more prerequisites and must be considered in the total number of units. Please refer to individual units for details.
CORE UNITS
Complete all fourteen (14) units from this list.
|
Unit code |
Unit title |
|
MSAENV272B |
Participate in environmentally sustainable work practices |
|
MSAPMOHS200A |
Work safely |
|
MSAPMSUP102A |
Communicate in the workplace |
|
MSAPMSUP106A |
Work in a team |
|
MSFGN2001 |
Make measurements and calculations |
|
MSFPF2001 |
Use picture framing sector hand and power tools |
|
MSFPF2002 |
Cut mouldings to length |
|
MSFPF2003 |
Join mouldings |
|
MSFPF2004 |
Mount artwork |
|
MSFPF2005 |
Cut mat boards |
|
MSFPF2006 |
Cut and handle glazing materials for framing |
|
MSFPF3001 |
De-frame artwork |
|
MSFPF3005 |
Recognise and handle artwork for framing |
|
MSFPF3006 |
Prepare design requirements for framing |
ELECTIVE UNITS
Select seven (7) units from Groups A, B and C as specified below.
Group A
Select a minimum of four (4) units from Group A.
|
Unit code |
Unit title |
|
ICPPR384A |
Set up and produce basic digital print |
|
MSFPF2007 |
Assemble a basic artwork package |
|
MSFPF2008 |
Recognise and repair finishes of framing materials |
|
MSFPF3002 |
Decorate mat boards |
|
MSFPF3003 |
Set up and operate computer numerically controlled (CNC) machines for picture framing work |
|
MSFPF3004 |
Prepare textiles for framing |
|
MSFPF3007 |
Apply frame finishes |
|
MSFPF3008 |
Assemble a complex artwork package |
|
MSFPF3009 |
Install artwork |
Group B
Select up to three (3) units from Group B.
|
Unit code |
Unit title |
|
BSBCCO304C |
Provide sales solutions to customers |
|
BSBCUS301B |
Deliver and monitor a service to customers |
|
BSBITU306A |
Design and produce business documents |
|
BSBSMB303A |
Organise finances for the micro business |
|
BSBSMB305A |
Comply with regulatory, taxation and insurance requirements for the micro business |
|
BSBWOR301B |
Organise personal work priorities and development |
|
MSAPMSUP201A |
Receive or despatch goods |
|
MSFGN3002 |
Estimate and cost job |
Group C
Up to three (3) relevant units may be chosen from units not already selected from Groups A and B, or units available in this Training Package or other endorsed Training Packages and accredited courses. Those units must be aligned at Certificate II level (maximum 1 unit), Certificate III level (maximum 3 units) or Certificate IV level (maximum 1 unit).
Units selected from other Training Packages and accredited courses via Group B must be relevant to the qualification outcome and not duplicate units available within this qualification.
Qualification Mapping Information
Supersedes and is based on LMF30802 Certificate III in Picture Framing. Outcomes are equivalent.
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=0601ab95-583a-4e93-b2d4-cfb27b03ed73
