Qualification details

MSF30313 - Certificate III in Timber and Composites Machining (Release 3)

Summary

Releases:
ReleaseStatusRelease date
3 (this release)Current 12/Jul/2016
(View details for release 2) Replaced04/Mar/2016
(View details for release 1) Replaced10/Dec/2013

Usage recommendation:
Current
Mapping:
MappingNotesDate
Supersedes LMF30502 - Certificate III in Furniture Making (Wood Machining)Not equivalent 09/Dec/2013


Training packages that include this qualification

Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnEssential
MEM07001B - Perform operational maintenance of machines/equipmentPerform operational maintenance of machines/equipment N/A
MEM14003B - Undertake basic production schedulingUndertake basic production scheduling N/A
MEM18001C - Use hand toolsUse hand tools N/A
MEM30017A - Use basic preventative maintenance techniques and toolsUse basic preventative maintenance techniques and tools N/A
MEM30031A - Operate computer-aided design (CAD) system to produce basic drawing elementsOperate computer-aided design (CAD) system to produce basic drawing elements N/A
MSFDN4003 - Produce patterns and templatesProduce patterns and templates N/A
MSFFDT4009 - Set up, operate and maintain basic static woodworking machines for furniture designsSet up, operate and maintain basic static woodworking machines for furniture designs N/A
MSFFF2004 - Prepare surfaces for finishingPrepare surfaces for finishing N/A
MSFFM2001 - Use furniture making sector hand and power toolsUse furniture making sector hand and power tools Core
MSFFM2002 - Assemble furnishing componentsAssemble furnishing components N/A
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 54

Classifications

SchemeCodeClassification value
ANZSCO Identifier 394213 Wood MacHinist 
ASCO (occupation type) Identifier 4921-11 Wood MacHinist (A-Grade) 
ASCED Qualification/Course Field of Education Identifier 0403 Building 
Qualification/Course Level of Education Identifier 514 Certificate III 
Taxonomy - Industry Sector N/A Furniture 
Taxonomy - Occupation N/A Wood Machinist,Wood Machinist (Furnishings) 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 394213 Wood MacHinist 02/May/2014 
ASCO (occupation type) Identifier 4921-11 Wood MacHinist (A-Grade) 02/May/2014 
ASCED Qualification/Course Field of Education Identifier 0403 Building 02/May/2014 
Qualification/Course Level of Education Identifier 514 Certificate III 10/Dec/2013 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Release 3 - Imported units updated. Equivalent.

Release 2 - Imported units updated. Equivalent.

Release 1 - New qualification

Qualification Description

This qualification describes the skills and knowledge required to perform timber and composites machining for the manufacture of furniture, cabinetry, windows and doors, and other components utilising a range of specialist machinery, and includes preparing and working from drawings and cutting lists. The skills include static and computer numerically controlled (CNC) machine set up, operation maintenance and basic troubleshooting.

There are three possible specialist streams embedded in this qualification:

Stream 1 -- Flat Panel Machining 

Stream 2 – Solid Timber Machining 

Stream 3 – Machining Technician 

Units may be chosen from the specialist stream elective groups to achieve any of the three specialisations or a broad combination of competencies can be selected from all electives with no identified specialisation.

Where specialisation is achieved, RTOs should identify this as follows:

MSF30313 Certificate III in Timber and Composites Machining 

(Flat Panel Machining) 

or

MSF30313 Certificate III in Timber and Composites Machining 

(Solid Timber Machining) 

or

MSF30313 Certificate III in Timber and Composites Machining 

(Machining Technician) 

There are no specific licences that relate to this qualification. However, depending on the jurisdiction, licensing or regulatory requirements may apply to the use of some units in this qualification. Local regulations should be checked for details.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

To be awarded the MSF30313 Certificate III in Timber and Composites Machining, competency must be achieved in twenty-seven (27)  units of competency.

  • eleven (11)  core units of competency
  • sixteen (16)  elective units of competency.

Note: Units marked with an asterisk have one or more prerequisites and must be considered in the total number of units. Please refer to individual units for details.

CORE UNITS 

Complete all eleven (11)  units from this list.

Unit code 

Unit title 

MSMENV272

Participate in environmentally sustainable work practices

MSMWHS200

Work safely

MSMSUP102

Communicate in the workplace

MSMSUP106

Work in a team

MSFFM2001

Use furniture making sector hand and power tools

MSFFM2010

Set up and operate basic static machines

MSFFM3009

Produce manual and computer-aided production drawings

MSFFM3010

Prepare cutting list from plans and job specifications

MSFGN2001

Make measurements and calculations

MSFGN3001

Read and interpret work documents

MSFGN3002

Estimate and cost job

ELECTIVE UNITS  

Select sixteen (16)  units from Groups A, B, C, D or E as specified below.

Group A 

Select a minimum of seven (7)  units from Group A for a specialisation in Stream 1 - Flat Panel Machining 

Unit code 

Unit title 

MSFFF2004

Prepare surfaces for finishing

MSFFM2002

Assemble furnishing components

MSFFM2004

Apply sheet laminates by hand

MSFFM2007

Follow plans to assemble production furniture

MSFFM2011

Apply manufactured board conversion techniques

MSFFM3012

Set up, operate and maintain sawing machines

MSFFM3013

Set up, operate and maintain drilling machines

MSFFM3019

Set up, operate and maintain automated edge banding machines

MSFFM3020

Fabricate synthetic solid surface products

Group B 

Select a minimum of seven (7)  units from Group B for a specialisation in Stream 2 – Solid Timber Machining 

Unit code 

Unit title 

MSFFDT4009

Set up, operate and maintain basic static woodworking machines for furniture designs

MSFFM2005

Join solid timber

MSFFM3008

Select timbers for furniture production

MSFFM3014

Set up, operate and maintain joining machines

MSFFM3015

Set up, operate and maintain planing and finishing machines

MSFFM3016

Set up, operate and maintain multi-head planing and moulding machines

MSFFM3017

Set up, operate and maintain routing and shaping machines

MSFFM3018

Set up, operate and maintain mechanical wood-turning lathes

MSFFM3024

Construct jigs and fixtures

Group C 

Select a minimum of seven (7)  units from Group C for a specialisation in Stream 3 –Machining Technician 

Unit code 

Unit title  

Prerequisites 

MSTGN4012

Fabricate or machine tooling

MEM07001B

Perform operational maintenance of machines/equipment

*

MEM14003B

Undertake basic production scheduling

MEM18001C

Use hand tools

MEM30017A

Use basic preventative maintenance techniques and tools

MSFFM3021

Set up, operate and maintain computer numerically controlled (CNC) sizing machines

MSFFM3022

Set up, operate and maintain computer numerically controlled (CNC) machining and processing centres

MSFFM3023

Produce and maintain cutting tools

MSFFT4005

Install and commission computer numerically controlled (CNC) software

MSS402001

Apply competitive manufacturing practices

MSS402020

Apply quick changeover procedures

MSS402060

Use planning software systems in operations

MSS402081

Contribute to the application of a proactive maintenance strategy

MSS403051

Mistake proof an operational process

UEENEEH166A

Fault find microcontroller based hardware

Group D 

Select up to five (5)  units from Group D.

Unit code 

Unit title 

MEM30031A

Operate computer-aided design (CAD) system to produce basic drawing elements

MSFDN4003

Produce patterns and templates

MSFFM2012

Set up, operate and maintain pressure and clamping machines

MSFFM3007

Prepare and apply decorative surfaces for furniture

MSFFM3011

Measure and draw site layout for manufactured furniture products

MSFFT4007

Sample, inspect and test products to specifications

MSS402010

Manage the impact of change on own work

MSS402021

Apply Just in Time procedures

MSS402051

Apply quality standards

TLID2003

Handle dangerous goods/hazardous substances

Group E 

Up to five (5)  relevant units may be chosen from units not already selected from Groups A, B C, or D or units available in this Training Package or other endorsed Training Packages and accredited courses. Those units must be aligned at Certificate II level (maximum 1 unit), Certificate III level (maximum 5 units) or Certificate IV level (maximum 1 unit).

Units selected from other Training Packages and accredited courses via Group E must be relevant to the qualification outcome and not duplicate units available within this qualification.

Qualification Mapping Information

Release 3 - Imported units updated. Equivalent.

Release 2 - Imported units updated. Equivalent.

Release 1 - New qualification. Supersedes and is based on LMF30502 Certificate III in Furniture Making (Wood Machining). Outcomes are not equivalent.

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.education.gov.au/Pages/TrainingDocs.aspx?q=0601ab95-583a-4e93-b2d4-cfb27b03ed73

Training component details
The following details are displayed for each different NRT:-

Training packages

- Training package details
- Training package components

Qualifications

- Qualification details
- Qualification components

Accredited courses

- Accredited course details

Modules

- Module details

Units of competency

- Units of competency details
- Unit components

Skill sets

- Skill set details
- Skill set components

Click on the Export link to export the NRT information to MS Word or PDF.

Click on the Manage notification link to create or change a notification for this NRT.

When selecting the Display history check box a set of tables will appear displaying a log of historical values describing what has changed and when over time.

If you have access to make changes to an NRT, click on the Edit link on the upper right hand side of the summary box.