Qualification details

MSF30113 - Certificate III in Furniture Finishing (Release 1)

Summary

Releases:
ReleaseStatusRelease date
(View details for release 2) Current04/Mar/2016
1 (this release)Replaced 10/Dec/2013

Usage recommendation:
Current
Mapping:
MappingNotesDate
Supersedes and is equivalent to LMF30202 - Certificate III in Furniture Finishing 09/Dec/2013


Training packages that include this qualification

Replaced release

You are currently viewing the components related to release 1.
The current release is release 2View release 2 details.

Units of competency

Classifications

SchemeCodeClassification value
ANZSCO Identifier 394211 Furniture Finisher 
ASCO (occupation type) Identifier 4929-13 Furniture Finisher 
ASCED Qualification/Course Field of Education Identifier 0301 Manufacturing Engineering And Technology 
Qualification/Course Level of Education Identifier 514 Certificate III 
Taxonomy - Industry Sector N/A Furniture 
Taxonomy - Occupation N/A Furniture Finisher 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 394211 Furniture Finisher 02/May/2014 
ASCO (occupation type) Identifier 4929-13 Furniture Finisher 02/May/2014 
ASCED Qualification/Course Field of Education Identifier 0301 Manufacturing Engineering And Technology 02/May/2014 
Qualification/Course Level of Education Identifier 514 Certificate III 10/Dec/2013 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Release 1 - New qualification

Qualification Description

This qualification describes the skills and knowledge required to perform a wide range of tasks associated with the preparation of surfaces and applying stains, coatings and finishes to furniture in manufacture or repair. Participation in teams, including group or team coordination, may be required.

A specialisation in French polishing can be recognised in this qualification where the following elective units are achieved:

MSFFF2003 Remove surface coatings

MSFFF2004 Prepare surfaces for finishing

MSFFF2007 Apply stains, fillers and bleach

MSFFF2008 Apply surface coatings by hand

MSFFF3001 Match and make up colours

MSFFF3007 Apply graining and decorative finishes

MSFFF3008 Apply traditional French polishing techniques

Where this specialisation is achieved, RTOs should identify this as follows:

MSF30113 Certificate III in Furniture Finishing 

(specialising in French Polishing) 

There are no specific licences that relate to this qualification. However, depending on the jurisdiction, licensing or regulatory requirements may apply to the use of some units in this qualification. Local regulations should be checked for details.

Entry Requirements

Not applicable

Packaging Rules

To be awarded the MSF30113 Certificate III in Furniture Finishing, competency must be achieved in twenty-three (23)  units of competency.

  • ten (10)  core units of competency
  • thirteen (13)  elective units of competency.

Note: Units marked with an asterisk have one or more prerequisites and must be considered in the total number of units. Please refer to individual units for details.

CORE UNITS  

Complete all ten (10)  units from this list.

Unit code 

Unit title 

MSAENV272B

Participate in environmentally sustainable work practices

MSAPMOHS200A

Work safely

MSAPMSUP102A

Communicate in the workplace

MSAPMSUP106A

Work in a team

MSFFF2001

Use furniture finishing sector hand and power tools

MSFFF2002

Dismantle and re-assemble furniture

MSFGN2001

Make measurements and calculations

MSFGN3001

Read and interpret work documents

MSFGN3002

Estimate and cost job

TLID2003A

Handle dangerous goods/hazardous substances

ELECTIVE UNITS  

Select thirteen (13)  units from Groups A, B and C as specified below.

Group A 

Select a minimum of eight (8)  units from Group A.

Unit code 

Unit title 

MSFFF2003

Remove surface coatings

MSFFF2004

Prepare surfaces for finishing

MSFFF2005

Maintain spray equipment and booth

MSFFF2006

Apply surface coatings by spray gun

MSFFF2007

Apply stains, fillers and bleach

MSFFF3001

Match and make up colours

MSFFF3003

Apply plural component coatings

MSFFF3004

Apply soft rubber techniques

MSFFF3006

Repair and touch up surfaces

Group B 

Select at least one (1)  unit from Group B.

Unit code 

Unit title 

MSFFF2008

Apply surface coatings by hand

MSFFF3002

Set up, operate and maintain mechanical coatings systems

MSFFF3005

Enhance finishes

MSFFF3007

Apply graining and decorative finishes

MSFFF3008

Apply traditional French polishing techniques

MSFFF3009

Set up, operate and maintain computer numerically controlled (CNC) coating systems

Group C 

Up to four (4)  relevant units may be chosen from units not already selected from Groups A and B, or units available in this Training Package or other endorsed Training Packages and accredited courses. Units must be aligned at Certificate II level (maximum 1 unit), Certificate III level (maximum 4 units) or Certificate IV level (maximum 1 unit).

Units selected from other Training Packages and accredited courses via Group C must be relevant to the qualification outcome and not duplicate units available within this qualification.

Qualification Mapping Information

Supersedes and is based on LMF30202 Certificate III in Furniture Finishing. Outcomes are equivalent.

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.education.gov.au/Pages/TrainingDocs.aspx?q=0601ab95-583a-4e93-b2d4-cfb27b03ed73

Training component details
The following details are displayed for each different NRT:-

Training packages

- Training package details
- Training package components

Qualifications

- Qualification details
- Qualification components

Accredited courses

- Accredited course details

Modules

- Module details

Units of competency

- Units of competency details
- Unit components

Skill sets

- Skill set details
- Skill set components

Click on the Export link to export the NRT information to MS Word or PDF.

Click on the Manage notification link to create or change a notification for this NRT.

When selecting the Display history check box a set of tables will appear displaying a log of historical values describing what has changed and when over time.

If you have access to make changes to an NRT, click on the Edit link on the upper right hand side of the summary box.