Modification History
Not applicable.
Unit Descriptor
Unit Descriptor |
This unit covers the knowledge and skills needed to interpret phase diagrams and so predict the microstructures of binary alloys. |
Application of the Unit
Application of the unit |
This unit applies to the interpretation of cooling phase diagrams as used in metallurgy. The application will primarily be to phase diagrams of metals and alloys showing temperature and composition variables. In a typical scenario, a metallurgical technician will be required to recommend a phase transition process in order to obtain a required microstructure, or to predict a microstructure from a known phase transition process. |
Licensing/Regulatory Information
Not applicable.
Pre-Requisites
Pre-requisite Units |
||
Employability Skills Information
Employability Skills |
This unit contains employability skills. |
Elements and Performance Criteria Pre-Content
Not applicable.
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1. Identify the microstructures from an equilibrium cooling phase diagram |
1.1. Phase diagram for metal or alloy is obtained from internal or external sources 1.2. Identify number, composition, proportion and structural arrangement of phases in binary alloys. 1.3. Describe structural changes due to varying proportion of alloying elements and temperature. 1.4. Describe the phase changes and final microstructures of binary alloys cooled under equilibrium conditions from the melt or during heat treatment operations. |
2. Identify the microstructures from a non equilibrium cooling phase diagram |
2.1. Identify number, composition, proportion and structural arrangement of phases in binary alloys. 2.2. Describe structural changes due to varying proportion of alloying elements and temperature. 2.3. Describe the phase changes and final microstructures of binary alloys cooled under equilibrium conditions from the melt or during heat treatment operations. |
3. Recognise characteristic microstructures of binary alloys |
3.1. .Recognise characteristic structures of dendrites (homogeneous and cored) columnar and equiaxed grains. 3.2. Recognise characteristic structures resulting from eutectic, eutectoid and peritectic reactions. 3.3. Recognise characteristic structures resulting from solid state precipitation. |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
This describes the essential skills and knowledge and their level, required for this unit. |
Required skills : |
|
Required knowledge : |
Competency includes sufficient knowledge of:
|
Evidence Guide
EVIDENCE GUIDE |
||
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package. |
||
Overview of assessment |
The person will be able to interpret binary phase diagrams. Assessment may be by workplace project, case study or suitable alternative. |
|
Critical aspects for assessment and evidence required to demonstrate competency in this unit |
It is essential that competence is demonstrated in the ability to:
|
|
Relationship to other units |
This unit may be assessed concurrently with other relevant units. |
|
Assessment method and context |
Assessors must be satisfied that the person can consistently perform the unit as a whole, as defined by the elements, performance criteria, skills and knowledge. A holistic approach should be taken to the assessment. Assessors should gather sufficient, fair, valid, reliable, authentic and current evidence from a range of sources. Sources of evidence may include direct observation, reports from supervisors, peers and colleagues, project work, samples, organisation records and questioning. Assessment should not require language, literacy or numeracy skills beyond those required for the unit. The assessee will have access to all techniques, procedures, information, resources and aids which would normally be available in the workplace. The method of assessment should be discussed and agreed with the assessee prior to the commencement of assessment. |
|
Resource implications |
This section should be read in conjunction with the range of variables for this unit of competency. Resources required include suitable access to an operating plant or equipment that allows for appropriate and realistic simulation. A bank of case studies/scenarios and questions will also be required to the extent that they form part of the assessment method. Questioning may take place either in the workplace, or in an adjacent, quiet facility such as an office or lunchroom. No other special resources are required. |
Range Statement
RANGE STATEMENT |
|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
|
Codes of practice /standards |
Where reference is made to industry codes of practice, and/or Australian/international standards, it is expected the latest version will be used. |
Scientific techniques and principles of cooling phase diagrams relate to |
|
Unit Sector(s)
Unit Sector |
Metallurgy |
Competency field
Competency Field |
Co-requisite units
Co-requisite Units |
||