Modification History
Not applicable.
Unit Descriptor
Unit descriptor
This competency covers the solving of process and other problems, beyond those associated directly with the process unit/equipment, using structured process improvement tools to identify improvements and/or solve problems.
Application of the Unit
Application of this unit
The competency is typically performed by an experienced operator, team leader or supervisor.
Generally the person would be part of a team during the solving of complex or systemic problems and would be expected to perform all parts of this unit and at all times would be liaising and cooperating with other members of the team. This includes:
- using a range of formal problem solving techniques
- identifying and clarifying the nature of the problem
- devising the best solution
- evaluating the solution
- developing an implementation plan to rectify the problem.
This unit does not cover the solving of problems undertaken as part of the operator's normal role which is covered in the relevant operation competency unit.
Licensing/Regulatory Information
Not applicable.
Pre-Requisites
Prerequisites
This unit has no prerequisites.
Employability Skills Information
Employability Skills
This unit contains employability skills.
Elements and Performance Criteria Pre-Content
ELEMENT Elements describe the essential outcomes of a unit of competency |
PERFORMANCE CRITERIA Performance Criteria describe the required performance needed to demonstrate achievement of the Element. Assessment of performance is to be consistent with the Evidence Guide. |
Elements and Performance Criteria
ELEMENT ELEMENT |
PERFORMANCE CRITERIA Performance Criteria describe the required performance needed to demonstrate achievement of the Element. Assessment of performance is to be consistent with the Evidence Guide. |
1. Identify the problem. |
1.1 Identify variances from normal operating parameters and product quality. 1.2 Define the extent, cause and nature of the problem by observation and investigation. 1.3 State and specify the problem clearly. |
2. Determine fundamental cause of problem. |
2.1 Identify possible causes based on experience and the use of problem solving tools/analytical techniques. 2.2 Develop possible cause statements. 2.3 Identify fundamental cause. |
3. Determine corrective action. |
3.1 Consider all possible options for resolution of the problem. 3.2 Consider strengths and weaknesses of possible options. 3.3 Determine corrective action to remove the problem and possible future causes. 3.4 Develop implementation plans identifying measurable objectives, resource needs and timelines in accordance with safety and operating procedures. 3.5 Develop recommendations for ongoing monitoring and testing. |
4. Communicate recommendations. |
4.1 Prepare report on recommendations. 4.2 Present recommendations to appropriate personnel. 4.3 Follow up recommendations if required. |
Required Skills and Knowledge
This describes the essential skills and knowledge and their level required for this unit.
Competence includes a thorough knowledge and understanding of the process, normal operating parameters, and product quality to recognise non-standard situations.
This unit of competency includes use of analytical techniques in problem solving such as:
- brainstorming
- fishbone diagrams/cause and effect diagrams
- process logic/process requirements
- logic tree
- similarity/difference analysis
- Pareto analysis
- force field/SWOT analysis
- flow charts
- control charts, runcharts and graphs
- scattergrams.
Action plans to solve problems are prepared including:
- priority requirements
- measurable objectives
- resource requirements
- methods for reaching objectives
- timelines
- coordination and feedback requirements
- safety requirements
- risk assessment
- environmental requirements.
Language , literacy and numeracy requirements
This unit requires the ability to read and interpret typical product specifications, job sheets and material labels as provided to operators.
Writing is required to the level of report writing and completing workplace forms.
Basic numeracy is also required, eg to interpret quality data and graphs.
Evidence Guide
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, required skills and knowledge, the Range Statement and the Assessment Guidelines for this Training Package.
Overview of assessment
A holistic approach should be taken to the assessment.
Assessors must be satisfied that the person can consistently perform the unit as a whole, as defined by the Elements, Performance Criteria and skills and knowledge.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
It is essential that competence is demonstrated in the knowledge and skills defined in this unit. These may include the ability to apply and explain:
- relevant equipment and operational processes
- enterprise policies and procedures
- enterprise goals, targets and measures
- enterprise quality, OHS and environmental requirements
- principles of decision-making strategies and techniques
- enterprise information systems and data collation
- industry codes and standards.
Consistent performance should be demonstrated. For example, look to see that:
- problems are recognised and clarified
- possible causes are identified, based on experience and use of analytical techniques in solving the problem, including:
- identifying variations
- identifying cause and effect
- separating single problems from multiple problems
- recognising recurring problems.
- fundamental cause of process or equipment faults is determined
- corrective/preventative implementation plans are developed to avoid recurrence of the problem
- implementation plan is presented to relevant personnel.
Assessment method and context
Assessment will occur on the job or in a simulated workplace.
Competence in this unit may be assessed:
- in a situation allowing the generation of evidence of the ability to recognise and respond to problems
- by using a suitable simulation and/or a range of case studies/scenarios
- through a combination of these techniques.
In all cases it is expected that practical assessment will be combined with targeted questioning to assess the underpinning knowledge and theoretical assessment will be combined with appropriate practical/simulation or similar assessment. Assessors need to be aware of any cultural issues that may affect responses to questions.
Assessment processes and techniques must be culturally appropriate and appropriate to the oracy, language and literacy capacity of the assessee and the work being performed.
Specific resources for assessment
This section should be read in conjunction with the Range Statement for this unit of competency. Resources required include suitable access to an operating plant or equipment that allows for appropriate and realistic simulation. A bank of case studies/scenarios and questions will also be required to the extent that they form part of the assessment method. Questioning may take place either in the workplace, or in an adjacent, quiet facility such as an office or lunchroom. No other special resources are required.
Access must be provided to appropriate learning and/or assessment support when required. Where applicable, physical resources should include equipment modified for people with disabilities.
Range Statement
RANGE STATEMENT
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts.
Where reference is made to industry codes of practice, and/or Australian/international standards, the latest version must be used.
Context
The competency unit applies to a wide range of processes and equipment. The process manufacturing technical units of competency include a problem solving element where problems specific to that competency unit are to be resolved. This competency unit is where structured problem solving techniques are to be applied more broadly, or with greater depth/rigour than is implied by the problem solving element of the technical units.
In large plants or manufacturing organisations with multiple processes, it may apply to more than one process if those processes interact with each other. It applies to all operators across all functions.
Procedures
All operations are performed in accordance with procedures.
Procedures include all relevant workplace procedures, work instructions, temporary instructions and relevant industry and government codes and standards.
Hazards
Typical hazards include leaks, spillages and equipment hazards that can occur during the walk-through of a plant.
Problems
'Anticipate and solve problems' means resolve a wide range of routine and non-routine problems, using product and process knowledge to develop solutions to problems which do not have a known solution/a solution recorded in the procedures.
Typical process and product problems may include:
- non- routine process and quality problems
- equipment selection, availability and failure
- teamwork and work allocation problems
- safety and emergency situations and incidents.
Unit Sector(s)
Not applicable.