^

 
 

Qualification details

MSA30309 - Certificate III in Surface Preparation and Coating Application (Release 3)

Summary

Usage recommendation:
Superseded
Mapping:
MappingNotesDate
Is superseded by and equivalent to MSM30216 - Certificate III in Surface Preparation and Coating ApplicationSupersedes and is equivalent to MSA30309 Certificate III in Surface Preparation and Coating Application. 01/Jun/2016

Releases:
ReleaseRelease date
3 (this release) 08/May/2012
(View details for release 2) 14/Nov/2011
(View details for release 1) 07/Apr/2011

Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnUsage RecommendationSort Table listing Units of Competency by the Usage Recommendation columnEssentialSort Table listing Units of Competency by the Essential column
MEM13001B - Perform emergency first aidPerform emergency first aidSupersededN/A
MEM12024A - Perform computationsPerform computationsSupersededN/A
MSAPMOHS216A - Operate breathing apparatusOperate breathing apparatusSupersededN/A
MSAPMPER202A - Observe permit workObserve permit workSupersededN/A
PMBPROD375B - Vulcanise products using an autoclaveVulcanise products using an autoclaveSupersededN/A
MEM08011B - Prepare surfaces using solvents and/or mechanical meansPrepare surfaces using solvents and/or mechanical meansSupersededN/A
MEM08015B - Apply protective coatings (advanced)Apply protective coatings (advanced)SupersededN/A
MEM17003A - Assist in the provision of on the job trainingAssist in the provision of on the job trainingSupersededN/A
RIIRIS201B - Conduct local risk controlConduct local risk controlSupersededN/A
MEM11001C - Erect/dismantle scaffolding and equipmentErect/dismantle scaffolding and equipmentSupersededN/A
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 67

Classifications

SchemeCodeClassification value
ANZSCO Identifier 322211 Sheetmetal Worker 
ASCO (occupation type) Identifier 4124-11 Sheetmetal Worker (First Class) 
ASCED Qualification/Course Field of Education Identifier 0307 Mechanical And Industrial Engineering And Technology 
Qualification/Course Level of Education Identifier 514 Certificate III 
Taxonomy - Industry Sector N/A Automotive Manufacturing 
Taxonomy - Occupation N/A Surface Preparation and Coating Operator 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 322211 Sheetmetal Worker 05/May/2010 
ASCO (occupation type) Identifier 4124-11 Sheetmetal Worker (First Class) 05/May/2010 
ASCED Qualification/Course Field of Education Identifier 0307 Mechanical And Industrial Engineering And Technology 05/May/2010 
Qualification/Course Level of Education Identifier 514 Certificate III 07/Apr/2011 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Correction made to one prerequisite code.

Version 3 - Minor formatting. Imported unit coded updated.

Description

This qualification covers the skills and knowledge required to perform the wide range of surface preparation and protective coating application operations which occur across a range of typically heavy industry, ships and infrastructure.

Job roles /employment outcomes 

The Certificate III in Surface Preparation and Coating Application has been developed as a trade level qualification for use in MSA07 Manufacturing Training Package. This qualification has been developed in response to an industry request. People with this qualification would be expected to work under routine only supervision, preparing surfaces and/or applying protective coatings in accordance with a provided technical specification. They would be expected to recognise situations where the intended approach was not appropriate/not working and take appropriate action to ensure the final result is satisfactory.

They may work in a manufacturer's factory or they may work as contractors on the site of the plant/ship/infrastructure.

Application 

The sector typically prepares surfaces for initial application, or for the reapplication, of protective coatings. In these circumstances it also applies the protective coating which may be liquid or solid. This qualification relates to surface preparation and  coating and coating units are required.

The surfaces being prepared are typically metal (usually ferrous) and may be structural or have other mechanical requirements.

People with this qualification may be expected to:

  • abrasively blast clean surfaces to Australian Standard requirements and in accordance with the specification
  • otherwise prepare surfaces for coating as required by the specification
  • apply liquid protective surface coatings
  • apply solid polymer surface coatings (this is usually a specialised area).

This work may be undertaken:

  • in a factory environment
  • in an on-site, outdoors environment
  • inside a vessel or other confined space
  • outside a vessel or structure
  • at heights
  • some combination of these.

Training programs for this qualification are suitable to be undertaken as part of a formal training contract with an employer under an Australian Traineeship or Apprenticeship arrangement.

Pathways into the qualification 

This qualification may be accessed by direct entry.

The units of competency contained within this qualification are common with other qualifications and credit should be granted towards this qualification where competency has already been achieved.

Credit should also be granted towards this qualification where competency has been achieved in units of competency contained within relevant skill sets. The skill set 'Confined Space Work Team Skill Set' was created in PMA08 Chemical, Hydrocarbons and Refining Training Package and is relevant to this qualification. Other skill sets have also been endorsed in MSA07 that relate to this qualification. Details are in 'Skill Sets in this Training Package'.

The units of competency in this qualification reflect competencies which are practiced within the industry and recognition should be granted where there is sufficient evidence of competency from work based experience.

Pathways from the qualification 

Further qualification pathways from this qualification include MSA40108 Certificate IV in Manufacturing Technology, MEM40105 Certificate IV in Engineering or other relevant qualifications.

Additional qualification advice 

MSA41108 Certificate IV in Competitive Manufacturing is available for team leaders or others who need a more generalist qualification covering the application of good manufacturing practice and lean principles.

Licensing considerations 

There are no specific licences that relate to this qualification. However, in some jurisdictions there may be licensing or regulatory requirements associated with the work. Local regulations should be checked for details.

Pathways Information

Not applicable.

Licensing/Regulatory Information

Not applicable.

Entry Requirements

Not applicable.

Employability Skills Summary

EMPLOYABILITY SKILLS QUALIFICATION SUMMARY 

Employability Skill 

Industry /enterprise requirements for this qualification 

Communication

  • maintain communication about multiple subjects and with multiple audiences
  • complete incident and other reports
  • use technical information and manufacturer information
  • collect, analyse and organise information
  • communicate ideas and information
  • use and contribute to workplace documentation
  • maintain workplace records

Teamwork

  • identify and describe own role and role of others
  • work within a team
  • resolve conflicts between team members
  • teamwork strategies

Problem solving

  • recognise a problem or a potential problem
  • determine problems needing priority action
  • refer problems outside area of responsibility to appropriate person
  • identify appropriate theory base for problem
  • seek information and assistance as required to solve problems
  • solve problems within area of responsibility
  • follow through items initiated until final resolution has occurred
  • identify and isolate faults in equipment
  • use a range of formal problem solving techniques

Initiative and enterprise

  • identify the most appropriate process conditions for equipment
  • determine problems needing action
  • recommend required action
  • report problems outside area of responsibility
  • distinguish between causes of faults

Planning and organising

  • prioritise actions to achieve required outcomes
  • plan own work requirements and assist others to plan theirs
  • plan and organise activities
  • identify tasks to achieve team goals
  • organise allocation of tasks
  • monitor completion of allocated tasks
  • develop and adjust a production schedule

Self-management

  • plan own work requirements from job requests
  • operate within appropriate time constraints and work standards
  • select and use appropriate equipment, materials, processes and procedures
  • plan to ensure effective production
  • apply standard procedures
  • identify resource requirements
  • recognise limitations and seek timely advice

Learning

  • ask questions to gain information
  • identify sources of information to expand knowledge and understanding
  • participate in improvement procedures
  • participate in development of continuous improvement strategies
  • assist others develop competency

Technology

  • operate and adjust equipment
  • start up and shut down equipment
  • set up equipment
  • monitor quality
  • function and operating principles of equipment
  • maintain workplace records

Packaging Rules

Packaging Rules 

To be awarded the Certificate III in Surface Preparation and Coating Application competency must be achieved in thirty one  (31 ) units of competency.

  • eleven  (11 ) core units of competency
  • twenty  (20 ) elective units of competency, five (5) of which may be selected from this Training Package, other endorsed Training Packages and accredited courses, as specified below.

Note : Where prerequisite units are identified they must be counted in the total number of units required for completion of the qualification.

Core units of competency 

  • Select all eleven  (11 ) units of competency from the following list.

Unit Code 

Title 

MEM12023A

Perform engineering measurements

MEM12024A

Perform computations

MEM14004A

Plan to undertake a routine task

MEM14005A

Plan a complete activity

MEM15002A

Apply quality systems

MEM15024A

Apply quality procedures

MEM16006A

Organise and communicate information

MEM16007A

Work with others in a manufacturing, engineering or related environment

MEM16008A

Interact with computing technology

MSAENV272B

Participate in environmentally sustainable work practices

MSAPMOHS200A

Work safely

Elective units of competency 

Group A  - Surface Preparation 

  • Select a minimum of three  (3 ) units from the following list.

Unit Code 

Title 

Prerequisite 

MEM08002C

Pre-treat work for subsequent surface coating

MEM13003B

MEM08007B

Control surface finish production and finished product quality

MEM08011B

Prepare surfaces using solvents and/or mechanical means

MEM13003B

MEM18001C

MEM18002B

MEM08012B

Prepare surfaces by abrasive blasting (basic)

MEM08016B

MEM13003B

MEM08013B

Prepare surfaces by abrasive blasting (advanced)

MEM08012B

MEM08016B

MEM13003B

MEM08016B

Control blast coating by-products, materials and emissions

MEM13003B

MSAPMWJ301A

Operate a high pressure water jetting system

PMBPROD248C

Prepare surfaces for coating

One  (1 ) relevant technical surface preparation unit which is available for inclusion at Certificate III may be chosen from this Training Package, other endorsed Training Packages and accredited courses.

Group B  - Coating Application 

  • Select a minimum of two  (2 ) units from the following list.

Unit Code 

Title 

Prerequisite 

MEM08014B

Apply protective coatings (basic)

MEM13003B

MEM08015B

Apply protective coatings (advanced)

MEM08014B

MEM13003B

MSAPMOPS201A

Cut polymer materials

MSAPMOPS202A

Fabricate polymer materials

PMBPROD241C

Lay up rubber lining or lag pulleys

PMBPROD242A

Bond polymers to surfaces

PMBPROD265C

Operate portable vulcanising equipment

PMBPROD323C

Produce powder coated products

PMBPROD375B

Vulcanise products using an autoclave

One  (1 ) relevant technical protective coating application unit which is available for inclusion at Certificate III may be chosen from this Training Package, other endorsed Training Packages and accredited courses.

Group C  - Other elective units 

  • Select a minimum of three  (3 ) units from the following list.

Unit Code 

Title 

Prerequisite 

MEM11001C

Erect/dismantle scaffolding and equipment

MEM18001C

MEM11002C

Erect/dismantle complex scaffolding and equipment

MEM11001C

MEM18001C

MEM11003B

Coordinate erection/dismantling of complex scaffolding/equipment

MEM11001C

MEM11002C

MEM18001C

MEM11004B

Undertake dogging

MEM18001C

MEM11010B

Operate mobile load shifting equipment

MEM11011B

Undertake manual handling

MEM11021B

Perform advanced operation of load shifting equipment

MEM11010B

MEM11022B

Operate fixed/moveable load shifting equipment

MEM13001B

Perform emergency first aid

MEM13003B

Work safely with industrial chemicals and materials

MSAPMOHS216A

Operate breathing apparatus

MSAPMOHS217A

Gas test atmospheres

MSAPMPER200C

Work in accordance with an issued permit

MSAPMPER202A

Observe permit work

MSAPMPER205C

Enter confined space

MSAPMPER200C

MSAPMPER300C

Issue work permits

RIIRIS201B

RIIOHS204A

Work safely at heights

RIIRIS201B

Conduct local risk control

Group D  - Other elective units 

  • Select a minimum of three  (3 ) units from the following list.

Unit Code 

Title 

Prerequisite 

MEM07001B

Perform operational maintenance of machines/equipment

MEM18001C

MEM11012B

Purchase materials

MEM11016B

Order materials

MEM12001B

Use comparison and basic measuring devices

MEM15003B

Use improvement processes in team activities

MEM16007A

MEM15004B

Perform inspection

MEM15005B

Select and control inspection process and procedures

MEM15004B

MEM16002C

Conduct formal interviews and negotiations

MEM16005A

Operate as a team member to conduct manufacturing, engineering or related activities

MEM16011A

Communicate with individuals and small groups

MEM16006A

MEM16013A

Operate in a self directed team

MEM16007A

MEM17001B

Assist in the development and delivery of training in the workplace

MEM17003A

Assist in the provision of on the job training

MEM18001C

Use hand tools

MEM18002B

Use power tools/hand held operations

MSAPMOPS301A

Treat corrosion

MSAPMOPS363A

Organise on site work

MSAPMSUP100A

Apply workplace procedures

MSAPMSUP303A

Identify equipment faults

MSAPMSUP390A

Use structured problem solving tools

MSAPMWJ201A

Use high pressure water jetting equipment

Group E  - Balance of units 

The balance of units, to a maximum of nine  (9 ), may be chosen from any combination of:

  • units from Groups A, B, C and D above, not already selected
  • up to three  (3 ) relevant units can be selected from this Training Package, other endorsed Training Packages and accredited courses, where those units are available for inclusion at Certificate III.