Modification History
Not applicable.
Description
The Certificate III in Process Manufacturing is intended for advanced production workers who use a range of equipment and provide support functions directly related to producing products. They would undertake more advanced roles, working in accordance with the operating procedures and would apply their knowledge to anticipate problems and solve a range of foreseen and unforeseen problems.
This qualification is for:
- production support workers - people working in manufacturing and filling the vital production support roles but who may not have the opportunity to develop competency in sufficient technical units related directly to producing products
- those employees who operate across more than one category within process manufacturing or 'specialised processes' and elsewhere when required.
It is designed for use across the three process manufacturing sectors:
- chemical, hydrocarbons and oil refining
- plastics, rubber and cablemaking
- manufactured mineral products.
Licensing considerations
There are no specific licenses that relate to this qualification. However, some units in this qualification may have licensing or regulatory requirements depending on the work context. Local regulations should be checked for details.
Pathways Information
Not applicable.
Licensing/Regulatory Information
Not applicable.
Entry Requirements
Not applicable.
Employability Skills Summary
EMPLOYABILITY SKILLS QUALIFICATION SUMMARY |
|
MSA30107 Certificate III in Process Manufacturing The following table contains a summary of the Employability Skills required by the process manufacturing industries for this qualification. The Employability Skills facets described here are broad industry requirements that may vary depending on qualification packaging options. Due to the high proportion of electives required by this qualification, the industry/enterprise requirements described above for each Employability Skill are representative of the industry in general and may not reflect specific job roles. Learning and assessment strategies for this qualification should be based on the requirements of the units of competency for this qualification. |
|
Employability Skill |
Industry /enterprise requirements for this qualification include : |
Communication |
|
Teamwork |
|
Problem solving |
|
Initiative and enterprise |
|
Planning and organising |
|
Self-management |
|
Learning |
|
Technology |
|
Packaging Rules
Packaging Rules
To be awarded the Certificate III in Process Manufacturing, competency must be achieved in twenty one (21 ) units of competency.
- four (4 ) core units of competency
- seventeen (17 ) elective units of competency, six (6) of which can be selected from this Training Package, other endorsed Training Packages and accredited courses, as specified below.
Note : Where prerequisite units are identified they must be counted in the total number of units required for completion of the qualification.
Core units of competency
- Select all four (4 ) units from the following list.
Unit code |
Unit title |
MSAENV272B |
Participate in environmentally sustainable work practices |
MSACMT251A |
Apply quality standards |
MSAPMOHS200A |
Work safely |
MSAPMSUP210A |
Process and record information |
Group A - Elective units
- Select a minimum of five (5 ) units from the following list.
Unit code |
Unit title |
Prerequisite |
Support units |
||
MEM03001B |
Perform manual production assembly |
|
MEM03006B |
Set assembly stations |
|
MEM11005B |
Pick and process order |
|
MEM11006B |
Perform production packaging |
|
MEM11007B |
Administer inventory procedures |
|
MEM12023A |
Perform engineering measurements |
|
MEM15001B |
Perform basic statistical quality control |
|
MEM15003B |
Use improvement processes in team activities |
|
MEM15004B |
Perform inspection |
|
MSACMS201A |
Sustain process improvements |
|
MSACMT220A |
Apply quick changeover procedures |
|
MSACMT250A |
Monitor process capability |
|
MSACMT260A |
Use planning software systems in manufacturing |
|
MSACMT280A |
Undertake root cause analysis |
|
MSAPMOHS300A |
Facilitate the implementation of OHS for a work group |
MSAPMOHS200A |
MSAPMPER300C |
Issue work permits |
RIIRIS201A |
MSAPMPER400A |
Coordinate permit process |
|
MSAPMSUP300A |
Identify and implement opportunities to maximise production efficiencies |
|
MSAPMSUP301A |
Apply HACCP to the workplace |
|
MSAPMSUP303A |
Identify equipment faults |
|
MSAPMSUP309A |
Maintain and organise workplace records |
|
MSAPMSUP310A |
Contribute to the development of plant documentation |
|
MSAPMSUP330A |
Develop and adjust a production schedule |
|
MSAPMSUP382A |
Provide coaching/mentoring in the workplace |
|
MSAPMSUP383A |
Facilitate a team |
|
MSAPMSUP390A |
Use structured problem solving tools |
|
MSL973001A |
Perform basic tests |
|
TAADEL301C |
Provide training through instruction and demonstration of work skills |
|
Technical units |
||
MEM09002B |
Interpret technical drawing |
|
MEM09003B |
Prepare basic engineering drawing |
MEM09002B |
MSAPMOPS363A |
Organise on site work |
|
A maximum of two (2) relevant units may be selected from this Training Package, other endorsed Training Packages and accredited courses, where those units are available for inclusion at Certificates III or IV. |
Group B - Other electives
- Select a maximum of twelve (12 ) units from the following list.
Unit code |
Unit title |
Support units |
|
LMTGN2008B |
Coordinate work of team/section |
MEM13003B |
Work safely with industrial chemicals and materials |
MEM16006A |
Organise and communicate information |
MEM16007A |
Work with others in a manufacturing, engineering or related environment |
MEM16008A |
Interact with computing technology |
MEM18001C |
Use hand tools |
MEM18002B |
Use power tools/hand held operations |
MSACMT221A |
Apply Just in Time (JIT) procedures |
MSACMT230A |
Apply cost factors to work practices |
MSACMT240A |
Apply 5S procedures in a manufacturing environment |
MSAPMOHS100A |
Follow OHS procedures |
MSAPMOHS110A |
Follow emergency response procedures |
MSAPMOHS205A |
Control minor incidents |
MSAPMOHS210A |
Undertake first response to non-fire incidents |
MSAPMOHS212A |
Undertake first response to fire incidents |
MSAPMOHS216A |
Operate breathing apparatus |
MSAPMOHS217A |
Gas test atmospheres |
MSAPMOHS220A |
Provide initial First Aid response |
MSAPMOPS100A |
Use equipment |
MSAPMOPS101A |
Make measurements |
MSAPMOPS102A |
Perform tasks to support production |
MSAPMPER200C |
Work in accordance with an issued permit |
MSAPMPER201A |
Monitor and control work permits |
MSAPMPER202A |
Observe permit work |
MSAPMPER205C |
Enter confined space |
MSAPMSUP100A |
Apply workplace procedures |
MSAPMSUP101A |
Clean workplace or equipment |
MSAPMSUP102A |
Communicate in the workplace |
MSAPMSUP106A |
Work in a team |
MSAPMSUP172A |
Identify and minimise environmental hazards |
MSAPMSUP200A |
Achieve work outcomes |
MSAPMSUP201A |
Receive or despatch goods |
MSAPMSUP204A |
Pack products or materials |
MSAPMSUP205A |
Transfer loads |
MSAPMSUP230A |
Monitor process operations |
MSAPMSUP240A |
Undertake minor maintenance |
MSAPMSUP273A |
Handle goods |
MSAPMSUP280A |
Manage conflict at work |
MSAPMSUP291A |
Participate in continuous improvement |
MSAPMSUP292A |
Sample and test materials and product |
PMBHAN103C |
Shift materials safely by hand |
TLID1007C |
Operate a forklift |
RIIRIS201A |
Conduct local risk control |
Technical units |
|
FPICOT2206B |
Cross cut materials with a hand-held chainsaw |
MSAPMOPS200A |
Operate equipment |
MSAPMOPS212A |
Use enterprise computers or data systems |
A maximum of four (4) relevant units may be chosen from this Training Package, other endorsed Training Packages and accredited courses, where they are available for inclusion at Certificate II. |