Modification History
Release 3. Revised to include new locksmithing units in elective banks. Supersedes and is equivalent to MEM30819 Certificate III in Locksmithing (Release 2).
Release 2. Mandatory training contract pathway added. Supersedes and is equivalent to MEM30819 Certificate III in Locksmithing (Release 1).
Release 1. Supersedes and is equivalent to MEM30805 Certificate III in Locksmithing.
Qualification Description
This qualification defines the skills and knowledge required of a locksmithing tradesperson within the locksmithing industry.
This qualification must be undertaken through a Training Contract associated with an Australian Trade Apprenticeship, or through formal trade recognition assessment processes.
The skills associated with this qualification are intended to apply to a wide range of locksmithing work, including undertaking the repair, manufacture and installation of locking and security systems in domestic, automotive and industrial applications.
This qualification is designed to provide an industry recognised skills profile related to trade work as a locksmithing tradesperson.
Assessment of some units of competency must, where indicated, include evidence of the candidate's performance in a functioning workplace where there is a sufficient range of appropriate tasks and materials to cover the scope of application of those units. All outcomes must reflect the standard of performance inherent in the job.
No licensing, legislative or certification requirements apply to this qualification at the time of publication. However, in some jurisdictions units in this qualification may require a license or relate to regulatory requirements. Licensing and regulatory information is included in the relevant units of competency.
Entry Requirements
There are no entry requirements for this qualification.
Packaging Rules
To be awarded the MEM30819 Certificate III in Locksmithing units of competency to a minimum value of 96 points must be achieved, chosen as outlined below:
- core units of competency listed below (totalling 33 points)
- elective units of competency to a minimum value of 40 points from Group A
- elective units of competency to a maximum value of 23 points from Group B to bring the total value to at least 96 points.
Group B elective units to the value of eight (8) points, that are relevant to work as a locksmithing tradesperson and do not duplicate skills and knowledge already available in units within this qualification, may be chosen from this Training Package, other endorsed Training Packages and accredited courses where those units are available for inclusion at Certificate III.
Registered Training Organisations (RTOs) must seek a determination from the industry parties in respect of the allocations of point values for units of competency drawn from other Training Packages or accredited courses. Determination of points requests are to be submitted to the industry parties through Innovation and Business Skills Australia (IBSA) Manufacturing. Refer to the MEM Companion Volume Implementation Guide for information on determination of unit point values.
No other descriptor can be used.
Prerequisites
Points associated with prerequisites count towards the total. Units with prerequisite requirements are marked with an asterisk (refer to the individual units for details). All prerequisites are included in the units listed.
Core units of competency
|
Unit code |
Unit title |
P |
Prereq |
|
MEM09002 |
Interpret technical drawing |
4 |
* |
|
MEM11011 |
Undertake manual handling |
2 |
* |
|
MEM12023 |
Perform engineering measurements |
5 |
* |
|
MEM12024 |
Perform computations |
3 |
* |
|
MEM13015 |
Work safely and effectively in manufacturing and engineering |
2 |
|
|
MEM14006 |
Plan work activities |
4 |
* |
|
MEM16006 |
Organise and communicate information |
2 |
* |
|
MEM16008 |
Interact with computing technology |
2 |
* |
|
MEM17003 |
Assist in the provision of on-the-job training |
2 |
* |
|
MEM18001 |
Use hand tools |
2 |
* |
|
MEM18002 |
Use power tools/hand held operations |
2 |
* |
|
MSMENV272 |
Participate in environmentally sustainable work practices |
3 |
Elective units of competency
Group A
|
Unit code |
Unit title |
P |
Prereq |
|
MEM05007 |
Perform manual heating and thermal cutting |
2 |
* |
|
MEM20015 |
Produce hand cut keys |
2 |
* |
|
MEM20016 |
Produce keys by cutting to code |
2 |
* |
|
MEM20017 |
Produce keys by duplication |
2 |
* |
|
MEM20018 |
Identify and program transponder keys |
2 |
* |
|
MEM20019 |
Service automotive transponder systems using diagnostic equipment |
2 |
* |
|
MEM20020 |
Use EEPROM programmers to service automotive transponder systems |
2 |
* |
|
MEM20021 |
Perform a building security inspection |
2 |
* |
|
MEM20023 |
Assemble and test lock mechanisms |
6 |
* |
|
MEM20024 |
Install and upgrade locks and hardware |
4 |
* |
|
MEM20025 |
Gain entry |
4 |
* |
|
MEM20026 |
Install and maintain door control devices and systems |
2 |
* |
|
MEM20027 |
Maintain and service mechanical locking devices |
6 |
* |
|
MEM20028 |
Plan and prepare a master key system |
4 |
* |
|
MEM20029 |
Develop and implement a master key system |
6 |
* |
|
MEM20030 |
Gain entry and reinstate fire and security containers |
4 |
* |
|
MEM20031 |
Gain entry and reinstate automotive locking systems |
4 |
* |
|
MEM20032 |
Service and repair fire and security containers |
6 |
* |
|
MEM20033 |
Service and repair mechanical automotive locking systems |
4 |
* |
|
MEM20035 |
Perform a site security survey |
2 |
* |
Group B
|
Unit code |
Unit title |
P |
Prereq |
|
MEM07001 |
Perform operational maintenance of machines/equipment |
2 |
* |
|
MEM07024 |
Operate and monitor machine and process |
4 |
* |
|
MEM07032 |
Use workshop machines for basic operations |
2 |
* |
|
MEM12001 |
Use comparison and basic measuring devices |
2 |
* |
|
MEM12003 |
Perform precision mechanical measurement |
2 |
* |
|
MEM13001 |
Perform emergency first aid |
1 |
* |
|
MEM13019 |
Undertake work health and safety activities in the workplace |
3 |
|
|
MEM15004 |
Perform inspection |
2 |
* |
|
MEM16004 |
Perform internal/external customer service |
2 |
* |
|
MEM16005 |
Operate as a team member to conduct manufacturing, engineering or related activities |
2 |
* |
|
MEM16012 |
Interpret technical specifications and manuals |
4 |
* |
|
MEM18003 |
Use tools for precision work |
4 |
* |
|
MEM20022 |
Modify and repair security equipment and systems |
4 |
* |
|
CPPSEC2021 |
Install security equipment and systems |
4 |
|
|
CPPSEC3036 |
Program and configure security equipment and systems |
2 |
|
|
CPPSEC3037 |
Test installed security equipment and systems |
2 |
|
|
CPPSEC3038 |
Commission and decommission security equipment and systems |
2 |
|
|
CPPSEC3039 |
Diagnose faults in electronic security equipment and systems |
2 |
|
|
CPPSEC3041 |
Conduct routine service of security equipment and systems |
4 |
|
|
CPPSEC3047 |
Provide estimate and quote on security system installations |
4 |
Qualification Mapping Information
Release 3. Revised to include new locksmithing units in elective banks. Supersedes and is equivalent to MEM30819 Certificate III in Locksmithing (Release 2).
Release 2. Mandatory training contract pathway added. Supersedes and is equivalent to MEM30819 Certificate III in Locksmithing (Release 1).
Release 1. Supersedes and is equivalent to MEM30805 Certificate III in Locksmithing.
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b7050d37-5fd0-4740-8f7d-3b7a49c10bb2
