Qualification details

MEM30705 - Certificate III in Marine Craft Construction (Release 1)

Summary

Releases:
ReleaseStatusRelease date
1 1 (this release)Current 01/Dec/2005

Usage recommendation:
Current

Training packages that include this qualification

Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnEssential
MEM04018B - Perform general woodworking machine operationsPerform general woodworking machine operations N/A
MEM07001B - Perform operational maintenance of machines/equipmentPerform operational maintenance of machines/equipment N/A
MEM07024B - Operate and monitor machine/processOperate and monitor machine/process N/A
MEM08002C - Pre-treat work for subsequent surface coatingPre-treat work for subsequent surface coating N/A
MEM08011B - Prepare surfaces using solvents and/or mechanical meansPrepare surfaces using solvents and/or mechanical means N/A
MEM08014B - Apply protective coatings (basic)Apply protective coatings (basic) N/A
MEM09002B - Interpret technical drawingInterpret technical drawing N/A
MEM09021B - Interpret and produce curved 3-dimensional shapesInterpret and produce curved 3-dimensional shapes N/A
MEM12007D - Mark off/out structural fabrications and shapesMark off/out structural fabrications and shapes N/A
MEM12023A - Perform engineering measurementsPerform engineering measurements N/A
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 44

Classifications

SchemeCodeClassification value
ANZSCO Identifier 399112 Shipwright 
ASCO (occupation type) Identifier 4981 Marine Construction Tradespersons 
ASCED Qualification/Course Field of Education Identifier 0317 Maritime Engineering And Technology 
Qualification/Course Level of Education Identifier 514 Certificate III 
Taxonomy - Industry Sector N/A Boating Services 
Taxonomy - Occupation N/A Shipwright 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 399112 Shipwright 02/Feb/2007 
ASCO (occupation type) Identifier 4981 Marine Construction Tradespersons 25/May/2006 
ASCED Qualification/Course Field of Education Identifier 0317 Maritime Engineering And Technology 25/May/2006 
Qualification/Course Level of Education Identifier 514 Certificate III 01/Dec/2005 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Not Applicable

Description

Not Applicable

Pathways Information

Not Applicable

Licensing/Regulatory Information

Not Applicable

Entry Requirements

Not Applicable

Employability Skills Summary

EMPLOYABILITY SKILLS QUALIFICATION SUMMARY 

Employability Skill 

Industry /enterprise requirements for this qualification include :

Communication

  • Read, interpret, follow and communicate information on written job instructions, specifications, standard operating procedures, charts, lists, drawings and other applicable reference documents
  • Produce sketches, diagrams, charts or graphs and 3D shapes (lofting)
  • Check and clarify task-related information
  • Recognise and use common marine terminology
  • Liaise with appropriate authorities

Teamwork

  • Work alone or as part of a team
  • Contribute to a group effort in order to plan and carry out work
  • Identify work roles, communicate and cooperate with others

Problem-solving

  • Undertake numerical operations, geometry and calculations/ formulae (including addition, subtraction, multiplication, division, fractions and decimals, percentages and proportions, simple ratios and averages)
  • Use appropriate measuring techniques
  • Inspect quality of own or other employee's work
  • Assess operation and condition of components against specifications or manufacturer's requirements
  • Translate designs into practical outcomes
  • Use diagnostic skills and tests to identify and determine causes of faults, including interpretation of in-built fault indicators and error codes

Initiative and enterprise

  • Be capable of applying the competency in new and different situations and contexts
  • Identify actual and foreseeable workplace hazards during course of work
  • Implement OHS risk management procedures
  • Modify work plan to overcome unforeseen difficulties or developments that occur as work progresses
  • Economise material use and minimise waste and negative environmental impacts
  • Participate in improvement procedures including process, quality and internal/external customer/supplier relationships

Planning and organising

  • Plan, prioritise and sequence work operations
  • Select and use planning techniques and tools
  • Organise and analyse information relevant to work
  • Set up jobs prior to commencement of work including selection of appropriate materials and adjustment of equipment
  • Inspect and prepare worksite

Self-management

  • Carry out work safely and in accordance with company policy and procedures, manufacturer's recommendations and legislative requirements
  • Monitor performance of operation or quality of product or service to ensure customer satisfaction
  • Take responsibility for work outcomes
  • Apply techniques, procedures, tools and equipment for compliance with site or manufacturers' specifications.

Learning

  • Check and clarify task related information with appropriate personnel or technical adviser
  • Identify customers' requirements with respect to the operation or quality of the product or service
  • Assess and modify own work practices
  • Use manuals, online help and other reference materials such as catalogues/lists as required
  • Maintain current knowledge of applicable standards, legislation, environmental guidelines, codes of practice and product/process developments
  • Assist with on the job training and assessment

Technology

  • Select and use appropriate tools, equipment, materials and machines
  • Select and use appropriate measuring/testing devices
  • Navigate technology to access /input /store/retrieve/save and produce information/data using appropriate software applications
  • Apply knowledge of marine systems and engineering principles, techniques, procedures, tools and equipment to achieve the required outcome
  • Use CAD equipment

Packaging Rules

The minimum requirements for achievement of the Certificate III in Marine Craft Construction are:

  • completion of all core units of competency listed below, and
  • completion of Group A Marine Craft Construction stream units from the list below to the value of at least 40 points, and
  • completion of units from Group B - Certificate III Trade specialisation units listed in Appendix 1, Volume 1 of the Training Package, to bring the total value to at least 73 points

Points associated with prerequisites count towards the total (refer to units and prerequisites listing in Appendix 2, Volume 1).

Appropriate Group B elective units to the value of 16 points may be chosen from other endorsed Training Packages and accredited courses where those units are available for inclusion at Certificate III. Note that the elective units listed below include all of the units that are approved for selection from the MEM Training Package for use in this qualification. This meets the NQC requirement that one sixth of the total units must be able to be selected from other qualifications in the same Training Package.

Registered Training Organisations must seek a determination from Manufacturing Skills Australia in respect of the allocation of points values for units of competency drawn from other Training Packages or accredited courses.

Only select units that would be suitable for Marine Craft Construction occupational outcomes

Additional qualification descriptors 

There are no approved additional descriptors for this qualification.

Core Units 

  • select all of the units from this list

Unit code 

Unit title 

MEM12023A

Perform engineering measurements

MEM12024A

Perform computations

MEM13014A

Apply principles of occupational health and safety in the work environment

MEM14004A

Plan to undertake a routine task

MEM14005A

Plan a complete activity

MEM15002A

Apply quality systems

MEM15024A

Apply quality procedures

MEM16006A

Organise and communicate information

MEM16007A

Work with others in a manufacturing, engineering or related environment

MEM16008A

Interact with computing technology

MEM17003A

Assist in the provision of on the job training

MSAENV272B

Participate in environmentally sustainable work practices

Elective Units 

Group A  - Marine Craft Construction stream units 

  • select units from this list to the value of at least 40 points

Unit code 

Unit title 

MEM04018B

Perform general woodworking machine operations

4

MEM07001B

Perform operational maintenance of machines/equipment

2

MEM07024B

Operate and monitor machine/process

4

MEM08002C

Pre-treat work for subsequent surface coating

4

MEM08011B

Prepare surfaces using solvents and/or mechanical means

2

MEM08014B

Apply protective coatings (basic)

4

MEM09002B

Interpret technical drawing

4

MEM09021B

Interpret and produce curved 3-dimensional shapes

4

MEM12007D

Mark off/out structural fabrications and shapes

4

MEM13003B

Work safely with industrial chemicals and materials

2

MEM13004B

Work safely with molten metals/glass

2

MEM18001C

Use hand tools

2

MEM18002B

Use power tools/hand held operations

2

MEM25001B

Apply fibre-reinforced materials

2

MEM25002B

Form and integrate fibre-reinforced structures

4

MEM25003B

Set up marine vessel structures

4

MEM25004B

Fair and shape surfaces

2

MEM25005B

Construct and assemble marine vessel timber components

8

MEM25006B

Undertake marine sheathing operations

2

MEM25007B

Maintain marine vessel surfaces

4

MEM25008B

Repair marine vessel surfaces and structures

4

MEM25009B

Form timber shapes using hot processes

2

MEM25010B

Perform fitout procedures

4

MEM25011B

Install marine systems

8

MEM25012B

Install and test operations of marine auxiliary systems

6

MEM25013B

Produce three-dimensional plugs/moulds

12

MEM25014B

Perform marine slipping operations

2

MEM25015A

Assemble and install equipment and accessories/ancillaries

2

MEM50002B

Work safely on marine craft

1

MEM50003B

Follow work procedures to maintain the marine environment

1

MEM50004B

Maintain quality of environment by following marina codes

1

MEM50009B

Safely operate a mechanically powered recreational boat

2

Group B  - Trade Specialisation units 

Select units from Certificate III Trade Specialisation units listed in Appendix I, Volume 1 of MEM05 to bring the total value of units to at least 73 points, including any prerequisites

Training component details
The following details are displayed for each different NRT:-

Training packages

- Training package details
- Training package components

Qualifications

- Qualification details
- Qualification components

Accredited courses

- Accredited course details

Modules

- Module details

Units of competency

- Units of competency details
- Unit components

Skill sets

- Skill set details
- Skill set components

Click on the Export link to export the NRT information to MS Word or PDF.

Click on the Manage notification link to create or change a notification for this NRT.

When selecting the Display history check box a set of tables will appear displaying a log of historical values describing what has changed and when over time.

If you have access to make changes to an NRT, click on the Edit link on the upper right hand side of the summary box.