^
 
 

Qualification details

MEM30619 - Certificate III in Jewellery Manufacture (Release 3)

Summary

Usage recommendation:
Current
Mapping:
MappingNotesDate
Supersedes and is equivalent to MEM30605 - Certificate III in Jewellery Manufacture 25/Jun/2019

Release Status:
Current
Releases:
ReleaseRelease date
3 (this release) 19/Dec/2022
(View details for release 2) 31/Mar/2021
(View details for release 1) 26/Jun/2019

Companion volumes:

Delivery:
Find RTOs approved to deliver this qualification.

Training packages that include this qualification

Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnUsage RecommendationSort Table listing Units of Competency by the Usage Recommendation columnEssentialSort Table listing Units of Competency by the Essential column
Modify filter options of the 'Essential' column in Table listing Units of Competency
MEM13001 - Perform emergency first aidPerform emergency first aidCurrentElective
MEM18001 - Use hand toolsUse hand toolsCurrentCore
MEM19062 - Production cut and polish gemstonesProduction cut and polish gemstonesCurrentElective
MEM19011 - Perform wax injection of moulds for lost wax casting processPerform wax injection of moulds for lost wax casting processCurrentElective
MEM19015 - Perform jewellery enamellingPerform jewellery enamellingCurrentElective
MEM13019 - Undertake work health and safety activities in the workplaceUndertake work health and safety activities in the workplaceCurrentElective
MEM19004 - Handle and examine gemstone materialsHandle and examine gemstone materialsCurrentElective
MEM19008 - Prepare jewellery designsPrepare jewellery designsCurrentElective
MEM19020 - Fault find and maintain micro-mechanismsFault find and maintain micro-mechanismsCurrentElective
MEM08010 - Manually finish/polish materialsManually finish/polish materialsCurrentElective
Refresh information in 'Table listing Units of Competency'
Navigate to first page in table listing Units of Competency.Navigate to previous page in table listing Units of Competency.
Navigate to page 1 in table listing Units of CompetencyNavigate to page 2 in table listing Units of CompetencyNavigate to page 3 in table listing Units of CompetencyNavigate to page 4 in table listing Units of CompetencyNavigate to page 5 in table listing Units of CompetencyNavigate to page 6 in table listing Units of CompetencyNavigate to page 7 in table listing Units of CompetencyNavigate to page 8 in table listing Units of Competency
Navigate to the next page in table listing Units of Competency.Navigate to the last page in table listing Units of Competency.
Items per page 10 | 20 | 50 | 100
Displaying items 41 - 50 of 72

Classifications

SchemeCodeClassification value
ANZSCO Identifier 399411 Jeweller 
ASCED Qualification/Course Field of Education Identifier 1003 Visual Arts And Crafts 
Qualification/Course Level of Education Identifier 514 Certificate III 
Taxonomy - Industry Sector N/A Jewellery 
Taxonomy - Occupation N/A Jeweller,Watchmaker 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 399411 Jeweller 26/Jun/2019 
ASCED Qualification/Course Field of Education Identifier 1003 Visual Arts And Crafts 26/Jun/2019 
Qualification/Course Level of Education Identifier 514 Certificate III 26/Jun/2019 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Content

Compare:
Compare content of this qualification with other releases or training components
Download:

Modification History

Release 3. Revised to include gemstone cutting and polishing units. Supersedes and is equivalent to MEM30619 Certificate III in Jewellery Manufacture (Release 2).

Release 2. Mandatory training contract pathway added.

Release 1. Supersedes and is equivalent to MEM30605 Certificate III in Jewellery Manufacture.

Qualification Description

This qualification defines the skills and knowledge required of a jewellery manufacture tradesperson within the jewellery industry. The qualification has been specifically developed for apprentices in the above trade.

This qualification must be undertaken through a Training Contract associated with an Australian Trade Apprenticeship, or through formal trade recognition assessment processes.

The skills associated with this qualification are intended to apply to a wide range of jewellery manufacture work, including undertaking designing and making jewellery and small objects using a wide range of materials, including metals, stones, woods, plastics and fibres.

Assessment of some units of competency must, where indicated, include evidence of the candidate's performance in a functioning workplace where there is a sufficient range of appropriate tasks and materials to cover the scope of application of those units. All outcomes must reflect the standard of performance inherent in the job.

No licensing, legislative or certification requirements apply to this qualification at the time of publication. However, in some jurisdictions units in this qualification may relate to licensing or regulatory requirements. Local regulations should be checked.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

To be awarded the MEM30619 Certificate III in Jewellery Manufacture units of competency to a minimum value of 96 points must be achieved, chosen as outlined below:

  • core units of competency listed below (totalling 33 points)
  • elective units of competency to a minimum value of 40 points from Group A
  • elective units of competency to a maximum value of 23 points from Group B to bring the total value to at least 96 points.

Group B elective units to the value of 8 points, that are relevant to work in a jewellery manufacture environment and associated industries and do not duplicate skills and knowledge already available in units within this qualification, may be chosen from this Training Package, other endorsed Training Packages and accredited courses where those units are available for inclusion at Certificate III.

Registered Training Organisations (RTOs) must seek a determination from the industry parties in respect of the allocations of point values for units of competency drawn from other Training Packages or accredited courses. Determination of points requests are to be submitted to the industry parties through Innovation and Business Skills Australia (IBSA) Manufacturing. Refer to the MEM Companion Volume Implementation Guide for information on determination of unit points values.

Prerequisites

Points associated with prerequisites count towards the total. Units with prerequisite requirements are marked with an asterisk (refer to the individual units for details). All prerequisites are included in the units listed.

Core units of competency 

Unit code 

Unit title 

P 

Prereq 

MEM09002

Interpret technical drawing

4

*

MEM11011

Undertake manual handling

2

*

MEM12023

Perform engineering measurements

5

*

MEM12024

Perform computations

3

*

MEM13015

Work safely and effectively in manufacturing and engineering

2

MEM14006

Plan work activities

4

*

MEM16006

Organise and communicate information

2

*

MEM16008

Interact with computing technology

2

*

MEM17003

Assist in the provision of on-the-job training

2

*

MEM18001

Use hand tools

2

*

MEM18002

Use power tools/hand held operations

2

*

MSMENV272

Participate in environmentally sustainable work practices

3

Elective units of competency 

Group A 

Unit code 

Unit title 

P 

Prereq 

MEM05006

Perform brazing and/or silver soldering

2

*

MEM06007

Perform basic incidental heat/quenching, tempering and annealing

2

*

MEM08010

Manually finish/polish materials

6

*

MEM13003

Work safely with industrial chemicals and materials

2

*

MEM13004

Work safely with molten metals/glass

2

*

MEM15004

Perform inspection

2

*

MEM18003

Use tools for precision work

4

*

MEM19001

Perform jewellery metal casting

6

*

MEM19002

Prepare jewellery illustrations

4

*

MEM19003

Handle gem materials

2

*

MEM19005

Produce three-dimensional precision items

8

*

MEM19007

Perform gemstone setting

6

*

MEM19012

Produce jewellery wax model

4

*

MEM19013

Produce jewellery metal masters

4

*

MEM19014

Perform hand engraving

4

*

MEM19015

Perform jewellery enamelling

4

*

MEM19016

Construct jewellery components

4

*

MEM19017

Fabricate jewellery items

6

*

Group B  

Unit code 

Unit title 

P 

Prereq 

MEM03001

Perform manual production assembly

4

*

MEM03002

Perform precision assembly

4

*

MEM03006

Set assembly stations

2

*

MEM07001

Perform operational maintenance of machines/equipment

2

*

MEM07005

Perform general machining

8

*

MEM07024

Operate and monitor machine and process

4

*

MEM07032

Use workshop machines for basic operations

2

*

MEM07040

Set multistage integrated processes

6

*

MEM08001

Perform wire, jig and barrel load/unload work

4

*

MEM08002

Pre-treat work for subsequent surface coating

4

*

MEM08003

Perform electroplating operations

6

*

MEM08011

Prepare surfaces using solvents and/or mechanical means

2

*

MEM09009

Create 2-D drawings using computer-aided design system

8

*

MEM09010

Create 3-D models using computer-aided design system

4

*

MEM11012

Purchase materials

6

*

MEM11016

Order materials

2

*

MEM12001

Use comparison and basic measuring devices

2

*

MEM12003

Perform precision mechanical measurement

2

*

MEM13001

Perform emergency first aid

1

*

MEM13019

Undertake work health and safety activities in the workplace

3

MEM15003

Use improvement processes in team activities

4

*

MEM16004

Perform internal/external customer service

2

*

MEM16005

Operate as a team member to conduct manufacturing, engineering or related activities

2

*

MEM18055

Dismantle, replace and assemble engineering components

3

*

MEM19004

Handle and examine gemstone materials

6

*

MEM19008

Prepare jewellery designs

6

*

MEM19009

Perform investment procedures for lost wax casting process

1

*

MEM19010

Produce rubber moulds for lost wax casting process

2

*

MEM19011

Perform wax injection of moulds for lost wax casting process

2

*

MEM19018

Repair jewellery items

6

*

MEM19020

Fault find and maintain micro-mechanisms

4

*

MEM19021

Diagnose and service micro-mechanisms

6

*

MEM19022

Perform precision micro-mechanism diagnosis and servicing

6

*

MEM19057

Research the gemstone market and complete pre-cutting processes

3

*

MEM19058

Cut and polish solid gemstones

8

*

MEM19059

Complete pre-cutting processes for gemstone assemblies

3

*

MEM19060

Cut and polish gemstone assemblies

8

*

MEM19061

Carve and polish gemstones

8

*

MEM19062

Production cut and polish gemstones

4

*

MEM19063

Use a faceting machine

4

*

MEM19064

Cut gemstone spheres and beads

3

*

MEM19065

Obtain rough and polished gemstones

1

*

Qualification Mapping Information

Release 3. Revised to include gemstone cutting and polishing units. Supersedes and is equivalent to MEM30619 Certificate III in Jewellery Manufacture (Release 2).

Release 2. Mandatory training contract pathway added.

Release 1. Supersedes and is equivalent to MEM30605 Certificate III in Jewellery Manufacture

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b7050d37-5fd0-4740-8f7d-3b7a49c10bb2

Back to top