Unit of competency details

Unit descriptor 

This unit covers sorting items using basic comparison measuring equipment, and maintaining the equipment.

Application of the unit 

Measurements are conducted in a production environment or at a work station.

Work is undertaken autonomously or as part of teamwork. All comparative measurements are undertaken to standard operating procedures and to regulatory and legislative requirements.

Band : A 

Unit Weight : 2 

Prerequisite units 

Employability skills 

This unit contains employability skills.

Elements describe the essential outcomes of a unit of competency.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide.

ELEMENT 

PERFORMANCE CRITERIA 

1. Use comparison and/or basic measuring devices

1.1. Measuring devices are identified and used to undertake required comparisons or measurements using standard operating procedures.

1.2. Checking or sorting of items is undertaken using comparison and/or basic measuring device according to standard operating procedures.

2. Maintain comparison and/or basic measuring devices

2.1. Basic care and storage is maintained to manufacturers' standards or standard operating procedures.

REQUIRED SKILLS AND KNOWLEDGE 

This section describes the skills and knowledge required for this unit.

Required skills 

Look for evidence that confirms skills in:

• using device in accordance with standard operating procedures
• storing and maintaining devices
• using basic numeracy skills for undertaking comparison measurements
• following oral instructions and written standard operating procedures

Required knowledge 

Look for evidence that confirms knowledge of:

• use and application of various comparison or measurement devices
• procedures for the correct use of devices
• procedures for maintaining and storing devices
• hazards and control measures associated with conducting measurements, including housekeeping
• safe work practices and procedures

EVIDENCE GUIDE 

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment 

A person who demonstrates competency in this unit must be able to use comparison and basic measuring devices.

Critical aspects for assessment and evidence required to demonstrate competency in this unit 

Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.

Context of and specific resources for assessment 

This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.

This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with using comparison and basic measuring devices or other units requiring the exercise of the skills and knowledge covered by this unit.

Method of assessment 

Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.

Guidance information for assessment 

RANGE STATEMENT 

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Basic measuring devices 

Linear measuring devices measuring to within 1mm graduation - may include rules, tapes and retractable tapes

Comparisons 

Comparison of length, angle, size, temperature, pressure, weight, voltage, resistance and amperage

Comparison measuring devices 

Go/no-go devices, thread angle and taper gauges, temperature gauges, pressure gauges, measuring gauges and overlay indicators, templates, digital devices and pre-set verniers and micrometers

Unit sector 

Co-requisite units 

Competency field 

Measurement