^

 
 

Unit of competency details

MEM09002B - Interpret technical drawing (Release 1)

Summary

Usage recommendation:
Superseded
Mapping:
MappingNotesDate
Is superseded by and equivalent to MEM09002 - Interpret technical drawingSupersedes and is equivalent to MEM09002B Interpret technical drawing 25/Jun/2019

Release Status:
Current
Releases:
ReleaseRelease date
1 1 (this release) 01/Dec/2005

Training packages that include this unit

CodeSort Table listing Training packages that include this unit by the Code columnTitleSort Table listing Training packages that include this unit by the Title columnRelease
MEA11 - Aeroskills Training PackageAeroskills Training Package 2.0 
PMA - Chemical, Hydrocarbons and RefiningChemical, Hydrocarbons and Refining 1.0 
PMB07 - Plastics, Rubber and Cablemaking Training PackagePlastics, Rubber and Cablemaking Training Package 1.1,2.0 
PMB - Plastics, Rubber and CablemakingPlastics, Rubber and Cablemaking 1.0 
UEG - Gas Industry Training PackageGas Industry Training Package 1.0 
LMF02 - Furnishing Training PackageFurnishing Training Package 6.0-8.1 
MSM - Manufacturing Training PackageManufacturing Training Package 1.0-6.0 
MSA07 - Manufacturing Training PackageManufacturing Training Package 6.0-8.4 
MEA - Aeroskills Training PackageAeroskills Training Package 1.0-4.0 
FBP - Food, Beverage and PharmaceuticalFood, Beverage and Pharmaceutical 1.0-4.1 
AUR12 - Automotive Industry Retail, Service and Repair Training PackageAutomotive Industry Retail, Service and Repair Training Package 1.0-2.1 
PMA08 - Chemical, Hydrocarbons and Refining Training PackageChemical, Hydrocarbons and Refining Training Package 2.0-5.0 
MEM05 - Metal and Engineering Training PackageMetal and Engineering Training Package 3.0-11.1 
UEP - Electricity Supply Industry - Generation Sector Training PackageElectricity Supply Industry - Generation Sector Training Package 1.0 
UEP12 - Electricity Supply Industry - Generation Sector Training PackageElectricity Supply Industry - Generation Sector Training Package 1.0-2.1 
AUR05 - Automotive Industry Retail, Service and Repair Training PackageAutomotive Industry Retail, Service and Repair Training Package 3.0-4.0 
PPM - Pulp & Paper Manufacturing Industry Training PackagePulp & Paper Manufacturing Industry Training Package 2.0 
PMC10 - Manufactured Mineral ProductsManufactured Mineral Products 1.0-1.1 
FPP10 - Pulp & Paper Manufacturing Industry Training PackagePulp & Paper Manufacturing Industry Training Package 1.0-1.3 
PMC - Manufactured Mineral ProductsManufactured Mineral Products 1.0 
CUA - Creative Arts and Culture Training PackageCreative Arts and Culture Training Package 1.0-4.1 
AUR - Automotive Retail, Service and Repair Training PackageAutomotive Retail, Service and Repair Training Package 2.0-5.0 
LMT07 - Textiles, Clothing and Footwear Training PackageTextiles, Clothing and Footwear Training Package 3.1-4.1 
FDF10 - Food ProcessingFood Processing 4.0-4.1 
HLT07 - Health Training PackageHealth Training Package 4.0-5.1 

Qualifications that include this unit

CodeSort Table listing Qualifications that include this unit by the Code columnTitleSort Table listing Qualifications that include this unit by the Title columnRelease
CUA30413 - Certificate III in Live Production and ServicesCertificate III in Live Production and Services
MEM30605 - Certificate III in Jewellery ManufactureCertificate III in Jewellery Manufacture1-2 
PMA30116 - Certificate III in Process Plant OperationsCertificate III in Process Plant Operations
MEA50511 - Diploma of Aeroskills (Non-Destructive Testing)Diploma of Aeroskills (Non-Destructive Testing)1-2 
PMC60110 - Advanced Diploma of Manufactured Mineral ProductsAdvanced Diploma of Manufactured Mineral Products1-2 
MSA30208 - Certificate III in Manufacturing TechnologyCertificate III in Manufacturing Technology1-4 
FDF30111 - Certificate III in Food ProcessingCertificate III in Food Processing3-4 
AUR20408 - Certificate II in Automotive Electrical TechnologyCertificate II in Automotive Electrical Technology1-2 
AUR21011 - Certificate II in MotorsportCertificate II in Motorsport1-2 
PMB30107 - Certificate III in Polymer ProcessingCertificate III in Polymer Processing1-2 
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 129

Skill sets that include this unit

CodeSort Table listing Skill sets that include this unit by the Code columnTitleSort Table listing Skill sets that include this unit by the Title columnRelease
MEASS00381 - MTA034 Aircraft welding using the plasma arc welding process - carbon and low alloy steelsMTA034 Aircraft welding using the plasma arc welding process - carbon and low alloy steels1-2 
MEASS00406 - MTA059 Machine aeronautical product component parts (general)MTA059 Machine aeronautical product component parts (general)1-2 
MEASS00094 - Aircraft welding using the gas metal arc welding process - aluminium alloysAircraft welding using the gas metal arc welding process - aluminium alloys
MSASS00003 - High pressure water jetting operatorHigh pressure water jetting operator
MEASS00388 - MTA041 Aircraft welding using the manual metal arc welding process - carbon and low alloy steelsMTA041 Aircraft welding using the manual metal arc welding process - carbon and low alloy steels1-2 
MEASS00109 - Aircraft welding using the gas welding process - corrosion and heat resisting steelsAircraft welding using the gas welding process - corrosion and heat resisting steels
MEASS00411 - MTA064 Machine aeronautical product component parts using NC/CNC machinesMTA064 Machine aeronautical product component parts using NC/CNC machines1-2 
MEASS00117 - Aircraft welding using the manual metal arc welding process - magnesium alloysAircraft welding using the manual metal arc welding process - magnesium alloys
MEASS00412 - MTA065 Machine aeronautical product component parts using NC/CNC machining centresMTA065 Machine aeronautical product component parts using NC/CNC machining centres1-2 
MEASS00107 - Aircraft welding using the gas welding process - carbon and low alloy steelsAircraft welding using the gas welding process - carbon and low alloy steels
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 88

Accredited courses that have this unit in the completion mapping

CodeSort Table listing Accredited courses that have this unit in the completion mapping by the Code columnTitleSort Table listing Accredited courses that have this unit in the completion mapping by the Title column
21839VIC - Certificate II in Plastics Processes(Pre-Apprenticeship)Certificate II in Plastics Processes(Pre-Apprenticeship) 
22263VIC - Certificate IV in Integrated TechnologiesCertificate IV in Integrated Technologies 
10201NAT - Certificate II in Automotive/Metal Fabrication (Pre-Vocational)Certificate II in Automotive/Metal Fabrication (Pre-Vocational) 
21915VIC - Certificate IV in Shared TechnologyCertificate IV in Shared Technology 
21916VIC - Diploma of Shared TechnologyDiploma of Shared Technology 
21917VIC - Advanced Diploma of Shared TechnologyAdvanced Diploma of Shared Technology 
21879VIC - Certificate III in Dental Equipment MaintenanceCertificate III in Dental Equipment Maintenance 
22221VIC - Diploma of Product DesignDiploma of Product Design 
52858WA - Certificate II in Welding for ShipbuildingCertificate II in Welding for Shipbuilding 
22478VIC - Diploma of Engineering TechnologyDiploma of Engineering Technology 
10584NAT - Certificate II in Career PreparationCertificate II in Career Preparation 
10123NAT - Certificate III in Garage Door and Gate Installation and MaintenanceCertificate III in Garage Door and Gate Installation and Maintenance 
10220NAT - Diploma of Industrial DesignDiploma of Industrial Design 
52845WA - Certificate II in Autonomous Workplace OperationsCertificate II in Autonomous Workplace Operations 
10089NAT - Certificate II in Skills for Work and TrainingCertificate II in Skills for Work and Training 
22192VIC - Course in Fibre Composites StructuresCourse in Fibre Composites Structures 

Classifications

SchemeCodeClassification value
ASCED Module/Unit of Competency Field of Education Identifier 030701 Mechanical Engineering  

Classification history

SchemeCodeClassification valueStart dateEnd date
ASCED Module/Unit of Competency Field of Education Identifier 030701 Mechanical Engineering  31/Aug/2006 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Not Applicable

Unit Descriptor

Unit descriptor 

This unit covers interpreting technical drawing applying to any of the full range of engineering disciplines.

Application of the Unit

Application of the unit 

Technical drawings may utilise perspective, exploded views or hidden view techniques. Drawings are provided to Australian Standard 1100 and/or Australian Standard 1102 and their equivalents from the full range of engineering disciplines.

Standard symbols to Australian Standard 1100 and/or Australian Standard 1102 or equivalent are recognised in field of employment. Technical drawings may include symbol glossaries.

Where any drawing, sketch, chart, diagram is only used as the technique for communication, then this unit does not apply: see Unit MEM12023A (perform engineering measurements) or Unit MEM16006A (Organise and communicate information).

Band :

Unit Weight :

Licensing/Regulatory Information

Not Applicable

Pre-Requisites

Prerequisite units 

Employability Skills Information

Employability skills 

This unit contains employability skills.

Elements and Performance Criteria Pre-Content

Elements describe the essential outcomes of a unit of competency.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide.

Elements and Performance Criteria

ELEMENT 

PERFORMANCE CRITERIA 

1. Select correct technical drawing

1.1. Drawing is checked and validated against job requirements or equipment.

1.2. Drawing version is checked and validated.

2. Interpret technical drawing

2.1. Components, assemblies or objects are recognised as required.

2.2. Dimensions are identified as appropriate to field of employment.

2.3. Instructions are identified and followed as required.

2.4. Material requirements are identified as required.

2.5. Symbols are recognised in the drawing as appropriate.

Required Skills and Knowledge

REQUIRED SKILLS AND KNOWLEDGE 

This section describes the skills and knowledge required for this unit.

Required skills 

Look for evidence that confirms skills in:

  • checking the drawing against job requirements/related equipment in accordance with standard operating procedures
  • confirming the drawing version as being current in accordance with standard operating procedures
  • where appropriate, obtaining the current version of the drawing in accordance with standard operating procedures
  • reading, interpreting information on the drawing, written job instructions, specifications, standard operating procedures, charts, lists and other applicable reference documents
  • checking and clarifying task related information
  • undertaking numerical operations, geometry and calculations/formulae within the scope of this unit

Required knowledge 

Look for evidence that confirms knowledge of:

  • application of AS1100.101 in accordance with standard operating procedures
  • relationship between the views contained in the drawing
  • objects represented in the drawing
  • units of measurement used in the preparation of the drawing
  • dimensions of the key features of the objects depicted in the drawing
  • understanding of the instructions contained in the drawing
  • the actions to be undertaken in response to those instructions
  • the materials from which the object(s) are made
  • any symbols used in the drawing as described in range statement
  • hazard and control measures associated with interpreting technical drawings, including housekeeping
  • safe work practices and procedures

Evidence Guide

EVIDENCE GUIDE 

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment 

A person who demonstrates competency in this unit must be able to interpret technical drawings as described.

Critical aspects for assessment and evidence required to demonstrate competency in this unit 

Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.

Context of and specific resources for assessment 

This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.

This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with interpreting technical drawings or other units requiring the exercise of the skills and knowledge covered by this unit.

Method of assessment 

Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning should not require language, literacy and numeracy skills beyond those required in this unit. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.

Guidance information for assessment 

Range Statement

RANGE STATEMENT 

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Interpret technical drawing 

AS1100.101 is an extensive work and the candidate is not required to have complete familiarity with all its contents, the application of AS1100 would usually be in line with standard operating procedures; interpretation may require guidance particularly in respect to any geometric tolerancing

Unit Sector(s)

Unit sector 

Co-requisite units

Co-requisite units 

Competency field

Competency field 

Drawing, drafting and design