Modification History
Single band identifier removed to clarify dual status
Unit Descriptor
Unit descriptor |
This unit covers identifying computer controlled machine program elements, writing a basic program and operation sheet, and trialling the program. |
Application of the Unit
Application of the unit |
This unit extends to writing a program to describe simple machine operations including tool paths using appropriate software for machines which may incorporate single spindles, single tools turrets, B axis angular, tool changers and component loaders of a pallet type, but excludes multiple spindles. The program may use common M and G codes but does not include the programming of advanced operations using canned cycles and sub-routines. Machine operations may include welding, thermal cutting, metal cutting, forming and shaping etc. Programs are trialled and edited as necessary to adjust operation of the machine. Technical difficulties are resolved in consultation with appropriate technical advisers. Work would be undertaken autonomously using predetermined standards of quality. If programming of advanced operations using canned cycles and sub-routines is required, see Unit MEM07019C (Program NC/CNC machining centre). Where additional machining skills in excess of Unit MEM07005C (Perform general machining) are required, then appropriate units should also be selected. For basic programming of computer controlled thermal cutting machines, see Unit MEM05054A (Write basic NC/CNC programs for thermal cutting machines). Band: This unit has dual status and is to be regarded as both a specialisation band A unit and Specialisation band B unit for progression to C7 (AQF level IV). Unit Weight : 4 |
Licensing/Regulatory Information
Not Applicable
Pre-Requisites
Prerequisite units |
||
Path 1 |
MEM07015B |
Set computer controlled machines/processes |
MEM07016C |
Set and edit computer controlled machines/processes |
|
MEM07024B |
Operate and monitor machine/process |
|
MEM07028B |
Operate computer controlled machines/processes |
|
MEM09002B |
Interpret technical drawing |
|
MEM12023A |
Perform engineering measurements |
|
MEM18001C |
Use hand tools |
|
Path 2 |
MEM07005C |
Perform general machining |
MEM07015B |
Set computer controlled machines/processes |
|
MEM07016C |
Set and edit computer controlled machines/processes |
|
MEM09002B |
Interpret technical drawing |
|
MEM12023A |
Perform engineering measurements |
|
MEM18001C |
Use hand tools |
Employability Skills Information
Employability skills |
This unit contains employability skills. |
Elements and Performance Criteria Pre-Content
Elements describe the essential outcomes of a unit of competency. |
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1. Identify basic NC/CNC machine program elements |
1.1. Appropriate program elements are selected for machine controller. |
2. Write basic NC/CNC machine program |
2.1. Engineering drawings are understood and interpreted to define basic machine function and tool path geometry. 2.2. Coordinates are calculated for simple tool path or basic machining functions. 2.3. Program is written in standard code format in accordance with standard operating procedures. |
3. Write NC/CNC operation sheet |
3.1. Operation sheets are produced to specification in accordance with standard operating procedures. |
4. Trial program |
4.1. Machine is operated in manual mode to test and prove program as required. 4.2. Program is edited if necessary to adjust operation as required. 4.3. Components are checked for conformance to specification as required. |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
This section describes the skills and knowledge required for this unit. |
Required skills |
Look for evidence that confirms skills in:
|
Required knowledge |
Look for evidence that confirms knowledge of:
|
Evidence Guide
EVIDENCE GUIDE |
|
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. |
|
Overview of assessment |
A person who demonstrates competency in this unit must be able to perform basic NC/CNC programming. Competency in this unit cannot be claimed until all prerequisites have been satisfied. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit |
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts. |
Context of and specific resources for assessment |
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate. This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with performing basic NC/CNC programming or other units requiring the exercise of the skills and knowledge covered by this unit. |
Method of assessment |
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials. |
Guidance information for assessment |
Range Statement
RANGE STATEMENT |
|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
|
Basic |
Machines which incorporate single spindles, single tools turrets, B axis angular, tool changers and component loaders of a pallet type, but not multiple spindles |
Unit Sector(s)
Unit sector |
Co-requisite units
Co-requisite units |
||
Competency field
Competency field |
Machine and process operations |