Unit of competency
Modification History
Release 1. Unit code changed. Changes to prerequisites and performance evidence. Supersedes and is not equivalent to MEM05048 Perform advanced welding using flux core arc welding process.
Application
This unit of competency has been developed for engineering fabrication trade training and the recognition of trade skills in advanced welding using flux core arc welding.
It defines the skills and knowledge required to plan, prepare for, and carry out advanced welding using flux core arc welding (FCAW) where the weld is required to conform to AS 1554 Structural Purpose (SP) or equivalent national or international standards or codes as defined in the unit and its prerequisites.
Where the welding associated with this unit also requires advanced manual thermal cutting, gouging and shaping, the unit MEM05071 Perform advanced manual thermal cutting, gouging and shaping must also be selected. Where the welding associated with this unit also requires the application of welding to codes and standards, the unit MEM05062 Apply welding and welding related codes and standards must be selected. Where the welding associated with this unit also requires the welding to be undertaken according to a formal welding procedure specification, the unit MEM05068 Apply welding procedure specifications must also be selected. Where formal weld records associated with the application of this unit are required to be maintained, the unit MEM05065 Maintain weld records must also be selected.
No licensing, legislative or certification requirements apply to this unit at the time of publication.
Band: A
Unit Weight: 4
Pre-requisite Unit
MEM05007 Perform manual heating and thermal cutting
MEM05052 Apply safe welding practices
MEM05056 Perform routine flux core arc welding
MEM05085 Select welding processes
MEM05096 Weld using flux core arc welding process
MEM09002 Interpret technical drawing
MEM11011 Undertake manual handling
MEM12023 Perform engineering measurements
MEM12024 Perform computations
MEM13015 Work safely and effectively in manufacturing and engineering
MEM14006 Plan work activities
MEM16006 Organise and communicate information
MEM18001 Use hand tools
MEM18002 Use power tools/hand held operations
Competency Field
Fabrication
Elements and Performance Criteria
Elements |
Performance Criteria |
Elements describe the essential outcomes. |
Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Determine job requirements |
1.1 Follow standard operating procedures (SOPs) 1.2 Comply with work health and safety (WHS) requirements at all times 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions |
2. Prepare materials for welding |
2.1 Prepare materials to achieve required weld requirements 2.2 Assemble/align materials to specification in accordance with SOPs |
3. Select, assemble and set up welding equipment and consumables |
3.1 Identify and select welding equipment and consumables appropriate to material 3.2 Assemble and adjust appropriate welding equipment |
4. Weld joints to specifications using FCAW |
4.1 Apply appropriate distortion prevention measures 4.2 Ensure welds are deposited to specifications 4.3 Clean joints to specifications 4.4 Rectify any distortion using appropriate techniques |
5. Ensure weld conformance |
5.1 Inspect weld joints visually for conformance to specifications 5.2 Rectify any weld crack or defect with minimum loss of sound metal using correct techniques and tools 5.3 Maintain weld records in accordance with SOPs |
Foundation Skills
This section describes those language, literacy, numeracy and employment skills that are essential to workplace performance in this unit of competency.
Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.
Range of Conditions
This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. |
|
Welds include: |
fillet and butt in all positions. |
Welding equipment includes: |
gases, settings, electrodes and related equipment selected in accordance with welding procedure. |
Materials include one or more of the following: |
|
Preparation includes one or more of the following: |
|
Rectify includes the use of one or more of the following: |
|
Weld cracks or defects include one or more of the following: |
|
Unit Mapping Information
No equivalent unit.
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b7050d37-5fd0-4740-8f7d-3b7a49c10bb2