Unit of competency
Modification History
Release 1. Supersedes and is equivalent to MEM05013C Perform manual production welding
Application
This unit of competency covers the skills and knowledge required to perform production welding, including spot welding, in a production environment.
Guidance may be required with respect to equipment settings, choice of consumables, gas mixtures and pressures.
Where automated/production welding is required to be performed unit MEM07024 Operate and monitor machine and process and unit MEM07025 Perform advanced machine and process operation, should also be selected as appropriate.
Where the interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.
Where the selection and use of engineering measurement is required unit MEM12023 Perform engineering measurements should also be selected.
Where the selection and use of tools is required unit MEM18001 Use hand tools and unit MEM18002 Use power tools/hand held operations, should also be selected as appropriate.
No licensing, legislative or certification requirements apply to this unit at the time of publication.
Band: A
Unit Weight: 2
Pre-requisite Unit
MEM11011 |
Undertake manual handling |
MEM13015 |
Work safely and effectively in manufacturing and engineering |
MEM16006 |
Organise and communicate information |
Competency Field
Fabrication
Elements and Performance Criteria
Elements describe the essential outcomes. |
Performance criteria describe the performance needed to demonstrate achievement of the element. |
||
1 |
Determine job requirements |
1.1 |
Follow standard operating procedures (SOPs) |
1.2 |
Comply with work health and safety (WHS) requirements at all times |
||
1.3 |
Use appropriate personal protective equipment (PPE) in accordance with SOPs |
||
1.4 |
Identify job requirements from specifications, sketches, job sheets or work instructions |
||
2 |
Weld material using appropriate welding process |
2.1 |
Prepare material for the process to be used following procedures |
2.2 |
Align material (if required) using dedicated jigs and fixtures |
||
2.3 |
Align materials, check alignment and if required adjust alignment using dedicated jigs and fixtures |
||
2.4 |
Carry out welding to accepted workplace standards |
Foundation Skills
This section describes those required skills (reading, writing, oral communication and numeracy) that are essential to workplace performance in this unit of competency.
Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.
Range of Conditions
This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. |
|
Material includes one (1) of more of the following: |
|
Welding includes one (1) or more of the following: |
|
Unit Mapping Information
Release 1. Supersedes and is equivalent to MEM05013C Perform manual production welding
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b7050d37-5fd0-4740-8f7d-3b7a49c10bb2