Unit of competency details

MEM05004C - Perform routine oxy acetylene welding (Release 1)

Summary

Releases:
ReleaseStatusRelease date
1 1 (this release)Current 01/Dec/2005

Usage recommendation:
Current

Training packages that include this unit

CodeTitleSort Table listing Training packages that include this unit by the Title columnRelease
UEP12 - Electricity Supply Industry - Generation Sector Training PackageElectricity Supply Industry - Generation Sector Training Package 1.0-2.1 
UEP06 - Electricity Supply Industry - Generation Sector Training PackageElectricity Supply Industry - Generation Sector Training Package 1.1 
UEG11 - Gas Industry Training PackageGas Industry Training Package 2.0 
TDM07 - Maritime Training PackageMaritime Training Package 1.0 
MEM05 - Metal and Engineering Training PackageMetal and Engineering Training Package 3.0-11.1 
MEA11 - Aeroskills Training PackageAeroskills Training Package 2.0 
MEA - Aeroskills Training PackageAeroskills Training Package 1.1-1.4 
LMT07 - Textiles, Clothing and Footwear Training PackageTextiles, Clothing and Footwear Training Package 3.1-4.1 
HLT07 - Health Training PackageHealth Training Package 4.0-5.1 
FWP - Forest and Wood Products Training PackageForest and Wood Products Training Package 2.0 
FPI11 - Forest and Forest Products Training PackageForest and Forest Products Training Package 1.0-2.3 
FPI05 - Forest and Forest Products Training PackageForest and Forest Products Training Package 3.0 
AUR12 - Automotive Industry Retail, Service and Repair Training PackageAutomotive Industry Retail, Service and Repair Training Package 1.0-2.1 
AUR05 - Automotive Industry Retail, Service and Repair Training PackageAutomotive Industry Retail, Service and Repair Training Package 3.0-4.0 
AUR - Automotive Retail, Service and Repair Training PackageAutomotive Retail, Service and Repair Training Package 3.0 
AHC10 - Agriculture, Horticulture and Conservation and Land ManagementAgriculture, Horticulture and Conservation and Land Management 2.0-8.0 
AHC - Agriculture, Horticulture and Conservation and Land Management Training PackageAgriculture, Horticulture and Conservation and Land Management Training Package 1.0-1.1 
ACM10 - Animal Care and ManagementAnimal Care and Management 2.0-3.0 

Qualifications that include this unit

CodeTitleSort Table listing Qualifications that include this unit by the Title columnRelease
UEP40412 - Certificate IV in ESI Generation Maintenance (Fabrication)Certificate IV in ESI Generation Maintenance (Fabrication) 1-3 
UEP40312 - Certificate IV in ESI Generation Maintenance (Mechanical)Certificate IV in ESI Generation Maintenance (Mechanical) 1-3 
UEP40112 - Certificate IV in ESI Generation - Systems OperationsCertificate IV in ESI Generation - Systems Operations 1-3 
UEP30212 - Certificate III in ESI Generation - OperationsCertificate III in ESI Generation - Operations 1-3 
UEP30112 - Certificate III in ESI Generation - Systems OperationsCertificate III in ESI Generation - Systems Operations 1-3 
UEP20112 - Certificate II in ESI Generation - Operations SupportCertificate II in ESI Generation - Operations Support 1-3 
UEP20110 - Certificate II in ESI Generation (Operations Support)Certificate II in ESI Generation (Operations Support) 
UEG40114 - Certificate IV in Gas Supply Industry OperationsCertificate IV in Gas Supply Industry Operations 
UEG30114 - Certificate III in Gas Supply Industry OperationsCertificate III in Gas Supply Industry Operations 
UEG20114 - Certificate II in Gas Supply Industry OperationsCertificate II in Gas Supply Industry Operations 
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 57

Skill sets that include this unit

CodeTitleSort Table listing Skill sets that include this unit by the Title columnRelease
MEASS00359 - MTA012 Aircraft welding using the gas welding process - titanium alloysMTA012 Aircraft welding using the gas welding process - titanium alloys 
MEASS00358 - MTA011 Aircraft welding using the gas welding process - copper based alloysMTA011 Aircraft welding using the gas welding process - copper based alloys 
MEASS00357 - MTA010 Aircraft welding using the gas welding process - nickel alloysMTA010 Aircraft welding using the gas welding process - nickel alloys 
MEASS00356 - MTA009 Aircraft welding using the gas welding process - corrosion and heat resisting steelsMTA009 Aircraft welding using the gas welding process - corrosion and heat resisting steels 
MEASS00355 - MTA008 Aircraft welding using the gas welding process - carbon and low alloy steelsMTA008 Aircraft welding using the gas welding process - carbon and low alloy steels 
MEASS00354 - MTA007 Aircraft welding using the gas welding process - magnesium alloysMTA007 Aircraft welding using the gas welding process - magnesium alloys 
MEASS00353 - MTA006 Aircraft welding using the gas welding process - aluminium alloysMTA006 Aircraft welding using the gas welding process - aluminium alloys 
MEASS00112 - Aircraft welding using the gas welding process - titanium alloysAircraft welding using the gas welding process - titanium alloys 
MEASS00111 - Aircraft welding using the gas welding process - nickel alloysAircraft welding using the gas welding process - nickel alloys 
MEASS00110 - Aircraft welding using the gas welding process - magnesium alloysAircraft welding using the gas welding process - magnesium alloys 
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 14

Classifications

SchemeCodeClassification value
ASCED Module/Unit of Competency Field of Education Identifier 030711 Boilermaking And Welding  

Classification history

SchemeCodeClassification valueStart dateEnd date
ASCED Module/Unit of Competency Field of Education Identifier 030711 Boilermaking And Welding  04/Apr/2002 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Not Applicable

Unit Descriptor

Unit descriptor 

This unit covers preparing materials and performing routine oxy acetylene welding.

Application of the Unit

Application of the unit 

This unit applies in a maintenance or manufacturing environment where the welding is not required to meet an Australian standard or equivalent. Fillet and butt welds would typically be performed on low carbon/mild steels.

Where welding is required to meet Australian Standard 1554 General Purpose or equivalent codes, OHS regulations and/or licensing requirements, Unit MEM05022C (Perform advanced welding using oxy acetylene process) should be selected.

Band :

Unit Weight :

Licensing/Regulatory Information

Refer to Application of the Unit

Pre-Requisites

Prerequisite units 

Employability Skills Information

Employability skills 

This unit contains employability skills.

Elements and Performance Criteria Pre-Content

Elements describe the essential outcomes of a unit of competency.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide.

Elements and Performance Criteria

ELEMENT 

PERFORMANCE CRITERIA 

1. Identify weld requirements

1.1. Weld requirements are identified from job instructions.

1.2. Location of welds is identified in accordance with standard operating procedures and job specifications.

2. Prepare materials for welding

2.1. Materials are cleaned and prepared ready for welding.

3. Prepare equipment for welding

3.1. Welding equipment is set up correctly.

3.2. Settings and consumables are selected.

4. Perform routine welding using oxy acetylene 

4.1. Safe welding practices are applied.

4.2. Materials are welded to job requirements.

4.3. Welds are cleaned in accordance with standard operating procedures.

Required Skills and Knowledge

REQUIRED SKILLS AND KNOWLEDGE 

This section describes the skills and knowledge required for this unit.

Required skills 

Look for evidence that confirms skills in:

  • preparing materials
  • setting up welding equipment
  • welding with oxy acetylene fuel gas
  • reading and interpreting routine information on written job instructions, specifications and standard operating procedures
  • following oral instructions
  • using measurement skills for joint preparation and routine oxy acetylene welding

Required knowledge 

Look for evidence that confirms knowledge of:

  • preparatory requirements
  • materials and consumables properties and characteristics
  • equipment and equipment settings
  • fuel gas properties and applications
  • post welding treatments
  • weld characteristics
  • any applicable industry standards, NOHSC guides, State/Territory regulatory codes of practice/standards
  • safe work practices and procedures
  • safe welding practices
  • use and application of personal protective equipment for routine oxy acetylene welding

Evidence Guide

EVIDENCE GUIDE 

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment 

A person who demonstrates competency in this unit must be able to prepare materials and carry out routine oxy acetylene welding.

Critical aspects for assessment and evidence required to demonstrate competency in this unit 

Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.

Context of and specific resources for assessment 

This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.

This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with performing routine oxy acetylene welding or other units requiring the exercise of the skills and knowledge covered by this unit.

Method of assessment 

Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.

Guidance information for assessment 

Range Statement

RANGE STATEMENT 

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Materials 

Mild and low carbon steel and cast iron

Prepared 

Preheating, setting up jigs, fixtures, clamps, joint preparation

Equipment 

Hoses, blowpipes, regulators

Consumables 

Filler rods, fluxes

Oxy acetylene 

The term 'oxy-acetylene' is used here to describe a range of fuel gases, including acetylene, LPG, hydrogen etc.

Cleaned 

Fluxes

Unit Sector(s)

Unit sector 

Co-requisite units

Co-requisite units 

Competency field

Competency field 

Fabrication

Training component details
The following details are displayed for each different NRT:-

Training packages

- Training package details
- Training package components

Qualifications

- Qualification details
- Qualification components

Accredited courses

- Accredited course details

Modules

- Module details

Units of competency

- Units of competency details
- Unit components

Skill sets

- Skill set details
- Skill set components

Click on the Export link to export the NRT information to MS Word or PDF.

Click on the Manage notification link to create or change a notification for this NRT.

When selecting the Display history check box a set of tables will appear displaying a log of historical values describing what has changed and when over time.

If you have access to make changes to an NRT, click on the Edit link on the upper right hand side of the summary box.