^

 
 

Qualification details

MEA30315 - Certificate III in Aircraft Life Support and Furnishing (Release 1)

Summary

Usage recommendation:
Superseded
Mapping:
MappingNotesDate
Supersedes and is equivalent to MEA30311 - Certificate III in Aircraft Life Support and Furnishing 11/Feb/2015
Is superseded by and equivalent to MEA30318 - Certificate III in Aircraft Life Support and Furnishing 30/Aug/2018

Releases:
ReleaseRelease date
1 1 (this release) 12/Feb/2015


Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnUsage RecommendationSort Table listing Units of Competency by the Usage Recommendation columnEssentialSort Table listing Units of Competency by the Essential column
DEFEO302D - Unpackage ammunitionUnpackage ammunitionSupersededElective
MEA412 - Pre-treat aluminium alloy surfacesPre-treat aluminium alloy surfacesSupersededElective
MSFUP3012 - Apply marine sewing and installation techniquesApply marine sewing and installation techniquesSupersededElective
AURVTT2005 - Select and apply trim and fabric materialsSelect and apply trim and fabric materialsSupersededElective
MEA503 - Maintain and fit immersion suitsMaintain and fit immersion suitsSupersededElective
MEA105 - Apply quality standards applicable to aviation maintenanceApply quality standards applicable to aviation maintenanceSupersededCore
AURVTT2006 - Select and apply trim and fabric adhesivesSelect and apply trim and fabric adhesivesSupersededElective
MEA504 - Maintain and fit oxygen masksMaintain and fit oxygen masksSupersededElective
MEA511 - Operate and maintain sewing machines and overlockersOperate and maintain sewing machines and overlockersSupersededElective
MEA513 - Maintain and pack survival inflatable life raftsMaintain and pack survival inflatable life raftsSupersededElective
MEA301 - Perform aircraft flight servicingPerform aircraft flight servicingCurrentElective
MEA303 - Remove and install aircraft pneumatic system componentsRemove and install aircraft pneumatic system componentsCurrentElective
MEA302 - Remove and install aircraft hydro-mechanical and landing gear system componentsRemove and install aircraft hydro-mechanical and landing gear system componentsSupersededElective
MEA101 - Interpret work health and safety practices in aviation maintenanceInterpret work health and safety practices in aviation maintenanceSupersededCore
DEFEO101D - Work safely with explosive ordnanceWork safely with explosive ordnanceSupersededElective
MEA416 - Apply aircraft identification markings, graphics and decalsApply aircraft identification markings, graphics and decalsSupersededElective
DEFEO501D - Conduct explosive ordnance inspectionConduct explosive ordnance inspectionSupersededElective
MEA419 - Inspect and repair/modify aircraft cabin/cockpit non-primary structure componentsInspect and repair/modify aircraft cabin/cockpit non-primary structure componentsSupersededElective
MEA510 - Maintain seat and pod electrical and electronic systemsMaintain seat and pod electrical and electronic systemsSupersededElective
MEA304 - Remove and install non-pressurised aircraft structural and non-structural componentsRemove and install non-pressurised aircraft structural and non-structural componentsCurrentElective
MEA502 - Maintain and fit helmetsMaintain and fit helmetsSupersededElective
MEA118 - Conduct self in the aviation maintenance environmentConduct self in the aviation maintenance environmentCurrentCore
MEA411 - Remove surface coatings from aircraft or aircraft componentsRemove surface coatings from aircraft or aircraft componentsSupersededElective
MSFSF2002 - Machine sew materialsMachine sew materialsDeletedElective
MEA509 - Manufacture, repair and alter aircraft related fabric componentsManufacture, repair and alter aircraft related fabric componentsSupersededElective
MEA108 - Complete aviation maintenance industry documentationComplete aviation maintenance industry documentationSupersededCore
MEA109 - Perform basic hand skills, standard trade practices and fundamentals in aviation maintenancePerform basic hand skills, standard trade practices and fundamentals in aviation maintenanceSupersededCore
MEA508 - Maintain, install and remove restraint systemsMaintain, install and remove restraint systemsSupersededElective
MEA107 - Interpret and use aviation maintenance industry manuals and specificationsInterpret and use aviation maintenance industry manuals and specificationsCurrentCore
MSFSF2001 - Cut single layer fabricsCut single layer fabricsSupersededElective
MEA414 - Remove light corrosion from aircraftRemove light corrosion from aircraftSupersededElective
MEA317 - Remove and install pressurised aircraft structural and non-structural componentsRemove and install pressurised aircraft structural and non-structural componentsCurrentElective
MEA501 - Maintain and fit anti-G suitsMaintain and fit anti-G suitsSupersededElective
MSAENV272B - Participate in environmentally sustainable work practicesParticipate in environmentally sustainable work practicesSupersededCore
MEA514 - Maintain and pack escape slidesMaintain and pack escape slidesSupersededElective
LMTTF2008A - Use adhesivesUse adhesivesSupersededElective
MEA505 - Maintain and pack parachutesMaintain and pack parachutesSupersededElective
MEM12001B - Use comparison and basic measuring devicesUse comparison and basic measuring devicesSupersededCore
DEFEO301D - Package ammunitionPackage ammunitionSupersededElective
MEA240 - Use electrical test equipment to perform basic electrical testsUse electrical test equipment to perform basic electrical testsSupersededElective
MEA103 - Plan and organise aviation maintenance work activitiesPlan and organise aviation maintenance work activitiesSupersededCore
MEA507 - Maintain, pack and fit survival inflatable buoyancy vestsMaintain, pack and fit survival inflatable buoyancy vestsSupersededElective
AURVTT2004 - Trim vehicle componentsTrim vehicle componentsSupersededElective
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 43 of 43

Classifications

SchemeCodeClassification value
ANZSCO Identifier 323112 Aircraft Maintenance Engineer (Mechanical) 
ASCED Qualification/Course Field of Education Identifier 0315 Aerospace Engineering And Technology 
Qualification/Course Level of Education Identifier 514 Certificate III 
Taxonomy - Industry Sector N/A Aircraft Maintenance 
Taxonomy - Occupation N/A Aircraft Life Support and Furnishing Tradesperson  

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 323112 Aircraft Maintenance Engineer (Mechanical) 14/May/2015 
ASCED Qualification/Course Field of Education Identifier 0315 Aerospace Engineering And Technology 14/May/2015 
Qualification/Course Level of Education Identifier 514 Certificate III 12/Feb/2015 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Release 1 - New qualification

Qualification Description

This qualification applies to members of the Australian Defence Force (ADF) and to employees of Aircraft Maintenance Organisations (AMOs) who are maintaining aircraft and personal life support equipment and aircraft furnishings.

The qualification consists of a number of common units plus mandatory and elective technical stream units, including a number of imported units dealing with explosive ordnance (pyrotechnics) safety and inspection, and with sewing, trimming and use of fabric adhesives.

The qualification articulates with MEA41115 Certificate IV in Aircraft Life Support and Furnishing and the common units and the elective Avionic, Mechanical and Structures Technical Stream units provide a number of credits towards other Aeroskills Certificates at Certificate II, III and IV levels.

This qualification applies to workplaces that operate under the airworthiness regulatory systems of the ADF and the Civil Aviation Safety Authority (CASA). Any regulatory/licensing requirements associated with any MEA units of competency must be met.

Entry Requirements

Not applicable

Packaging Rules

To be awarded the MEA30315 Certificate III in Aircraft Life Support and Furnishing, competency must be demonstrated in twenty-one (21)  units of competency, as follows:

  • nine (9)  core units consisting of common and imported units
  • twelve (12)  elective units (chosen in accordance with the unit selection guidelines in Column 4) from the technical stream and imported units in Group A.

Core units of competency 

Unit code 

Unit title 

Prerequisites 

MEA101

Interpret work health and safety practices in aviation maintenance

MEA103

Plan and organise aviation maintenance work activities

MEA101, MEA105

MEA107, MEA108

MEA105

Apply quality standards applicable to aviation maintenance processes

MEA101, MEA107

MEA107

Interpret and use aviation maintenance industry manuals and specifications

MEA108

Complete aviation maintenance industry documentation

MEA105

MEA109

Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance

MEA105, MEA108

MEA118

Conduct self in the aviation maintenance environment

MEM12001B

Use comparison and basic measuring devices

MSAENV272B

Participate in environmentally sustainable work practices

Elective units of competency 

Group A 

Unit code 

Unit title 

Prerequisites 

Unit selection guidelines 

MEA240

Use electrical test equipment to perform basic electrical tests

MEA101, MEA103

MEA105, MEA107

MEA108, MEA109

MEA301

Perform aircraft flight servicing

MEA101, MEA103

MEA105, MEA107

MEA108, MEA109

MEA302

Remove and install aircraft hydro-mechanical and landing gear system components

MEA101, MEA103

MEA105, MEA107

MEA108, MEA109

MEA303

Remove and install aircraft pneumatic system components

MEA101, MEA103

MEA105, MEA107

MEA108, MEA109

MEA304

Remove and install non-pressurised aircraft structural and non-structural components

MEA302

Do not take with MEA317

MEA317

Remove and install pressurised aircraft structural and non-structural components

MEA302, MEA303

Do not take with MEA304

MEA411

Remove surface coatings from aircraft or aircraft components

MEA101, MEA103

MEA105, MEA107

MEA108, MEA109

MEA412

Pre-treat aluminium alloy surfaces

MEA101, MEA103

MEA105, MEA107

MEA108, MEA109

MEA414

Remove light corrosion from aircraft

MEA101, MEA103

MEA105, MEA107

MEA108, MEA109

Do not take with MEA419

MEA416

Apply aircraft identification markings, graphics and decals

MEA101, MEA103

MEA105, MEA107

MEA108, MEA109

MEA419

Inspect and repair/modify aircraft cabin/cockpit non-primary structure components

MEA101, MEA103

MEA105, MEA107

MEA108, MEA109

Do not take with MEA414

MEA501

Maintain and fit anti-G suits

MEA101, MEA103

MEA105, MEA107

MEA108, MEA109 MEA118, MEA511

MSFSF2002

MEA502

Maintain and fit helmets

MEA101, MEA103

MEA105, MEA107

MEA108, MEA109 MEA118, MEA240

MEA503

Maintain and fit immersion suits

MEA101, MEA103

MEA105, MEA107

MEA108, MEA109 MEA118

LMTTF2008A

MEA504

Maintain and fit oxygen masks

MEA101, MEA103

MEA105, MEA107

MEA108, MEA109 MEA118, MEA240

MEA505

Maintain and pack parachutes

MEA101, MEA103

MEA105, MEA107

MEA108, MEA109 MEA118, MEA511 MSFSF2002

MEA507

Maintain, pack and fit survival inflatable buoyancy vests

MEA101, MEA103

MEA105, MEA107

MEA108, MEA109 MEA118

MEA508

Maintain, install and remove restraint systems

MEA101, MEA103

MEA105, MEA107

MEA108, MEA109 MEA118, MEA511 MSFSF2002

MEA509

Manufacture, repair and alter aircraft related fabric components

MEA101, MEA103

MEA105, MEA107

MEA108, MEA109 MEA118, MEA511 MSFSF2002

MEA510

Maintain seat and pod electrical and electronic systems

MEA240

MEA511

Operate and maintain sewing machines and overlockers

MEA513

Maintain and pack survival inflatable life rafts

MEA101, MEA103

MEA105, MEA107

MEA108, MEA109 MEA118

MEA514

Maintain and pack escape slides

MEA101, MEA103

MEA105, MEA107

MEA108, MEA109 MEA118

AURVTT2004

Trim vehicle components

Do not take with MSFUP3012

AURVTT2005

Select and apply trim and fabric materials

AURVTT2006

Select and apply trim and fabric adhesives

Do not take with LMTTF2008A

MSFSF2001

Cut single layer fabrics

MSFSF2002

Machine sew materials

MSFUP3012

Apply marine sewing and installation techniques

Do not take with AURVTT2004

LMTTF2008A

Use adhesives

Do not take with AURVTT2006

DEFEO101D

Work safely with explosive ordnance

DEFEO301D

Package ammunition

DEFEO302D

Unpackage ammunition

DEFEO501D

Conduct explosive ordnance inspection

Qualification Mapping Information

Supersedes and is equivalent to MEA30311 Certificate III in Aircraft Life Support and Furnishing

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=ce216c9c-04d5-4b3b-9bcf-4e81d0950371