Unit of competency
Modification History
Release 1 - New unit of competency
Application
This unit of competency requires application of hand skills and the use of fundamental system/component knowledge and applicable maintenance publications and test equipment to troubleshoot faults in avionic systems of fixed and rotary wing aircraft that are beyond the bounds of maintenance manual fault diagnosis guides during scheduled or unscheduled maintenance. Work may be performed individually or as part of a team.
The unit covers competencies required to progress from an Aircraft Maintenance Engineer at Certificate IV to the granting of a B2 maintenance certification licence under Civil Aviation Safety Regulation (CASR) Part 66, in accordance with the licensing provisions in the Companion Volume Implementation Guide and the Companion Volume CASA Interface.
The skills and knowledge covered by the units of competency listed in the MEA Aeroskills Training Package for Aircraft Maintenance Engineer (Avionics or Mechanical as applicable) at Certificate IV are prerequisite to the attainment of the elements of competency specified in this unit. This includes full coverage of the CASR Part 66 Avionics or Mechanical Syllabus subjects/topics listed in the Companion Volume Implementation Guide.
Pre-requisite Unit
Competency Field
Aviation maintenance
Unit Sector
Elements and Performance Criteria
Elements describe the essential outcomes. |
Performance criteria describe the performance needed to demonstrate achievement of the element. |
||
1. |
Verify the defect |
1.1 |
Available information from flight crew, such as flight phase, aircraft configuration etc., and maintenance documentation both current and previous history, are used as necessary, to assist in fault determination |
1.2 |
Inspection of the affected system is carried out to check both physical integrity and correct operation |
||
1.3 |
Information gained from Central Maintenance Systems is verified against physical integrity and correct operation, where applicable |
||
1.4 |
The effects on a system from interfaces/integration with other systems are taken into account |
||
2. |
Isolate the defect |
2.1 |
Logical processes, including the application of basic principles and system knowledge and known facts, are used to augment maintenance manual fault diagnosis guides to ensure efficient and accurate troubleshooting |
2.2 |
Specialist advice is obtained, where required and/or available, to assist with the troubleshooting process |
||
2.3 |
Faults are located and the causes of the defects are clearly identified and correctly recorded in maintenance documentation, including any other systems disturbed, where required |
||
3. |
Determine defect rectification requirements |
3.1 |
Defect rectification requirements are determined and the necessary repair action initiated once verification and isolation of the defect are confirmed |
4. |
Verify defect rectification |
4.1 |
Defect is rectified in accordance with approved maintenance data |
4.2 |
All systems disturbed or accessed during troubleshooting are restored as applicable using maintenance manuals, repair schemes or approved maintenance data |
||
4.3 |
All checks required by approved maintenance data to ensure correct operation of all disturbed systems are performed |
Foundation Skills
Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.
Range of Conditions
This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. |
||
Systems and related components include: |
|
|
Troubleshooting |
Troubleshooting, for the purpose of this unit, is defined as:
|
|
Procedures and requirements include: |
|
Unit Mapping Information
Release 1 – equivalent to MEA235B Perform advanced troubleshooting in aircraft avionic maintenance
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=ce216c9c-04d5-4b3b-9bcf-4e81d0950371