Modification History
Not applicable.
Unit Descriptor
Unit descriptor |
This unit covers the skills and knowledge required to perform finishing of wool for making tops and bumps, final gilling, baling and packaging. |
Application of the Unit
Application of the Unit |
This unit applies to the setting up and operation of wool finishing machines and associated equipment. Operator maintenance of wool finishing machines and equipment, which may be scheduled or unscheduled and may vary according to workplace requirements Work conducted in a variety of environments, such as:
Work may be conducted in small to large scale enterprises and may involve individual and team activities. Work is conducted under limited supervision with the exercise of initiative, discrimination and judgement. Occasional supervision of other personnel may be required The application of this unit is according to OHS practices of the enterprise and workplace practices, which may include:
This unit requires the application of skills associated with planning and organising the safe and effective use of wool finishing processes and technology. This unit also requires an ability to interpret and document job related information on production status, check the quality of outcomes and identify and address problems relating to own work. |
Licensing/Regulatory Information
Not applicable.
Pre-Requisites
Prerequisites |
Employability Skills Information
Employability Skills |
This unit contains employability skills. |
Elements and Performance Criteria Pre-Content
Not applicable.
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1 Operate wool finishing machines and equipment |
1.1 All necessary settings and preparation for machine or equipment operation are identified and assessed in accordance with specifications and workplace standard procedures 1.2 Work area around machine or equipment is cleaned and maintained to meet workplace and OHS practices 1.3 Finishing and gilling equipment is started in accordance with workplace standard operating procedures 1.4 Tubs, cans and creels are changed as required 1.5 Wool tops or bumps are removed from machine; identification applied; tops are weighed, packaged and transported 1.6 Finishing and gilling equipment is stopped or shut down in accordance with all safety and workplace standard operating procedures |
2 Carry out operator maintenance |
2.1 Minor running problems are identified, corrected by the operator where appropriate, and reported in accordance with workplace and equipment manufacturer's procedures 2.2 Major machine or equipment or product faults are reported 2.3 Minor maintenance and cleaning are performed in accordance with manufacturer's specifications and workplace procedures |
3 Monitor product quality |
3.1 Quality requirements of finished wool tops or bumps are correctly identified and applied for all stages of the process 3.2 Wool flow is monitored to meet enterprise standard operating procedures and quality requirements 3.3 Blending is monitored to ensure blending consistency and feed uniformity 3.4 Wool samples are taken and prepared where required 3.5 Wool or product quality is visually checked to ensure standard is maintained 3.6 Any deviations from normal are recognised, isolated and reported 3.7 Expertise of colleagues is accessed to address quality issues and expand own knowledge, as required |
4 Dispose of waste materials |
4.1 Waste is kept to a minimum through correct application of workplace lot change and run out procedures 4.2 Waste is recycled where possible 4.3 Machine waste is disposed of in accordance with environmental and safety procedures 4.4 Environmental requirements and procedures concerned with waste, pollution and recycling of materials are correctly applied at all stages of the process |
5 Communicate production information |
5.1 Records and other documentation are clearly and accurately completed 5.2 Information from other operators, shifts and supervisory personnel regarding production status and problems is accurately interpreted by the operator 5.3 Information regarding production status and problems is accurately communicated to other operators, shifts and supervisory personnel |
Required Skills and Knowledge
This describes the essential skills and knowledge and their level, required for this unit. |
Demonstrates knowledge of:
|
Demonstrates skills to:
|
Evidence Guide
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package. |
|
Critical aspects of evidence to be considered |
Demonstrates skills and knowledge to:
|
Consistency in performance |
Consistently applies skills and knowledge when:
|
Resource implications |
Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices. |
Context for assessment |
Assessment may occur on the job or in an appropriately simulated environment. |
Interdependent assessment |
This unit may be assessed independently or in combination with other relevant units. |
Range Statement
RANGE STATEMENT The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts. |
||
Legislative/regulatory requirements |
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements. |
|
Machines or equipment may include |
|
|
OHS practices |
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
|
Unit Sector(s)
Sector |
Textile Production |