Modification History
Not applicable.
Description
Job roles /employment outcomes
The Certificate III reflects vocational outcomes for those performing production roles applying technical skills within a millinery production environment.
Application
This qualification is typically used to develop skill and knowledge in the application of specialised technical, operational and supervisory skills within millinery enterprises.
Pathways into the qualification
Direct entry into this qualification requires completion of a total of nineteen (19) units of competency according to the rules described below.
Credit may be granted towards this qualification by those who have completed LMT20807 Certificate II in Millinery or achieved equivalent industry experience.
Pathways from the qualification
Further training pathways from this qualification include LMT40407 Certificate IV in Millinery, or other relevant qualifications.
Licensing considerations
There are no specific licences that relate to this qualification. However, some units in this qualification may have licensing or regulatory requirements in some environments. Local regulations should be checked for details.
Pathways Information
Not applicable.
Licensing/Regulatory Information
Not applicable.
Entry Requirements
Not applicable.
Employability Skills Summary
EMPLOYABILITY SKILLS QUALIFICATION SUMMARY |
|
Employability Skills Summary - Certificate III in Millinery The following table contains a summary of the Employability Skills as identified by the Millinery industries for this qualification. This table should be interpreted in conjunction with the detailed requirements of each unit of competency packaged in this qualification. The outcomes described here are broad industry requirements that reflect skill requirements for this level. |
|
Employability Skill |
Industry /enterprise requirements for this qualification include : |
Communication |
|
Teamwork |
|
Problem-solving |
|
Initiative and enterprise |
|
Planning and organising |
|
Self-management |
|
Learning |
|
Technology |
|
Packaging Rules
Packaging Rules
To be awarded the Certificate III in Millinery, competency must be achieved in nineteen (19) units of competency.
- Eleven (11) core units of competency
- Eight (8) elective units of competency as specified below.
If Certificate II has been achieved, an additional six (6) units are required. All core units listed must be achieved - any Certificate III core units not achieved at Certificate II must be completed as part of the additional six (6) unit required for the Certificate III. Units that have been credited towards lower level qualifications must not be selected in the additional six (6) unit requirement.
Note: Where prerequisite units apply, these have been noted, and must be considered in the total number of units.
CORE UNITS
Complete all eleven (11) units from this list
Unit code |
Unit title |
LMTGN2001B |
Follow defined OH&S policies and procedures |
LMTGN2002B |
Apply quality standards |
LMTGN2003B |
Work in the Textiles, Clothing and Footwear industry |
LMTML2001A |
Identify materials used in millinery |
LMTML2002A |
Make flat patterns for millinery |
LMTML2007A |
Block and shape millinery by hand |
LMTML2008A |
Assemble simple blocked millinery components |
LMTML3001A |
Make flat patterns from hat blocks |
LMTML3003A |
Make millinery using a pattern derived from a hat block |
LMTML3004A |
Identify performance and handling requirements of millinery materials |
MSAENV272B |
Participate in environmentally sustainable work practices |
ELECTIVE UNITS
Select eight (8) units as specified below.
- A minimum of one (1) unit must be selected from Group A
- A maximum of three (3) units may be selected from Group C
- The remainder must be selected from Groups A and B.
GROUP A
Unit code |
Unit title |
Prerequisites |
LMTML3002A |
Block and shape complex millinery |
LMTML2007A LMTML3004A |
LMTML3005A |
Use skin, fur or leather in millinery products |
LMTML2002A |
LMTML3006A |
Assemble complex blocked millinery components |
LMTML3002A |
GROUP B
Unit code |
Unit title |
Prerequisites |
LMTCL2001B |
Use a sewing machine |
|
LMTCL2005B |
Use specialised machinery to assist assembly production |
|
LMTCL2011B |
Draw and interpret a basic sketch |
|
LMTCL2018B |
Perform basic maintenance of headwear |
|
LMTFD3001B |
Market design product to local outlets |
|
LMTGN2004B |
Work in a team environment |
|
LMTGN2005B |
Perform minor maintenance |
|
LMTGN2006B |
Perform test or inspection to check product quality |
|
LMTGN2008B |
Coordinate work of team or section |
|
LMTGN2009B |
Operate computing technology in a Textiles, Clothing and Footwear workplace |
|
LMTGN2010B |
Perform tasks to support production |
|
LMTGN3002B |
Organise and plan own work to achieve planned outcomes |
|
LMTGN3003B |
Estimate and cost job |
|
LMTGN3008A |
Draw 3D designs |
|
LMTML2003A |
Produce and attach millinery trims |
|
LMTML2004A |
Produce felt for millinery |
LMTML2001A |
LMTML2005A |
Place and cut millinery patterns |
|
LMTML2006A |
Use millinery steaming and pressing equipment |
|
LMTML2009A |
Apply millinery sewing and adhesion techniques |
|
LMTML2010A |
Make millinery with flat pattern components |
GROUP C
Other Millinery units that are available at Certificates II (maximum 1 unit), III (maximum 3 units) and IV (maximum 1 unit) |
Other TCF Training Package units that are available at Certificates II (maximum 1 unit), III (maximum 3 units) and IV (maximum 1 unit) |
Units from other endorsed Training Packages and accredited courses that are available at Certificates II (maximum 1 unit), III (maximum 3 units) and IV (maximum 1 unit) |