Modification History
Release 2 - imported units updated to current versions, outcomes equivalent.
Description
Job roles /employment outcomes
The Certificate III reflects vocational outcomes for those performing supervision roles, specialised technical tasks or multi-skilled roles within a production environment.
Application
This qualification is typically used to develop skill and knowledge in the application of specialised technical, operational and supervisory skills within textile fabrication enterprises.
Pathways Information
Pathways into the qualification
Direct entry into this qualification requires completion of a total of nineteen (19) units of competency according to the rules described below.
Credit may be granted towards this qualification by those who have completed LMT20507 Certificate II in Textile Fabrication or achieved equivalent industry experience.
Pathways from the qualification
Further training pathways from this qualification include LMT40107 Certificate IV in Textile Technology and Production, MSA41108 Certificate IV in Competitive Manufacturing, or other relevant manufacturing qualifications.
Licensing/Regulatory Information
There are no specific licences that relate to this qualification. However, some units in this qualification may have licensing or regulatory requirements in some environments. Local regulations should be checked for details.
Entry Requirements
Not applicable.
Employability Skills Summary
EMPLOYABILITY SKILLS QUALIFICATION SUMMARY |
|
Employability Skills Summary - Certificate III in Textile Fabrication The following table contains a summary of the Employability Skills as identified by the Textile Fabrication industries for this qualification. This table should be interpreted in conjunction with the detailed requirements of each unit of competency packaged in this qualification. The outcomes described here are broad industry requirements that reflect skill requirements for this level. |
|
Employability Skill |
Industry /enterprise requirements for this qualification include : |
Communication |
|
Teamwork |
|
Problem-solving |
|
Initiative and enterprise |
|
Planning and organising |
|
Self-management |
|
Learning |
|
Technology |
|
Packaging Rules
To be awarded the Certificate III in Textile Fabrication, competency must be achieved in nineteen (19) units of competency.
- Nine (9) core units of competency
- Ten (10) elective units of competency as specified below.
If Certificate II has been achieved, an additional six (6) units are required. All core units listed must be achieved - any Certificate III core units not achieved at Certificate II must be completed as part of the additional six (6) unit required for the Certificate III. Units that have been credited towards lower level qualifications must not be selected in the additional six (6) unit requirement. A minimum of three (3) of the six (6) units must be selected from Groups A or B.
Note: Where prerequisite units apply, these have been noted, and must be considered in the total number of units.
CORE UNITS
Complete all nine (9) units from this list
Unit code |
Unit title |
LMTGN2001B |
Follow defined OH&S policies and procedures |
LMTGN2002B |
Apply quality standards |
LMTGN2003B |
Work in the Textiles, Clothing and Footwear industry |
LMTGN3002B |
Organise and plan own work to achieve planned outcomes |
LMTTF2005A |
Translate information into measurements or diagrams |
LMTTF2006A |
Measure and scale geometric shapes |
LMTTF2009A |
Identify and select canvas and sail materials |
LMTTF2018A |
Use canvas and sail production tools |
MSAENV272B |
Participate in environmentally sustainable work practices |
ELECTIVE UNITS
Select ten (10) units as specified below.
- A minimum of two (2) units must be selected from Group A
- A minimum of two (2) units must be selected from Group B
- A minimum of two (2) units must be selected from Group C
- A maximum of two (2) units may be selected from Group E
- A maximum of three (3) units may be selected from Group F
- The remainder must be selected from Groups A, B and C.
NOTE: Competitive Manufacturing Training Package units, identified in Group E as MSACM coded units, should be selected on the basis of work requirements. Those at Certificate II level (units in the 200 series) are appropriate for operators. MSACM units for those in Certificate III level positions such as team leaders should be selected from both the 200 series and the 400 series.
GROUP A
Unit code |
Unit title |
Prerequisites |
LMTTF3001A |
Identify customer requirements (on site) |
|
LMTTF3002A |
Gain customer acceptance of service proposal |
|
LMTTF3003A |
Produce patterns for 3D products |
LMTTF2007A |
LMTTF3004A |
Perform advanced welding of plastic materials |
LMTTF2014A |
LMTTF3005A |
Apply lofting skills to sail making |
|
LMTTF3006A |
Cut and join sail panels |
GROUP B
Unit code |
Unit title |
Prerequisites |
LMTGN3001B |
Control production in a section of a Textiles, Clothing and Footwear enterprise |
|
LMTGN3003B |
Estimate and cost job |
|
LMTGN3005B |
Plan tasks to assist production operations |
|
LMTLG3001A |
Make a prototype |
|
LMTTF3001A |
Identify customer requirements (on site) |
|
LMTTF3002A |
Gain customer acceptance |
|
LMTTF3003A |
Produce patterns for 3D products |
LMTTF2007A |
LMTTF3004A |
Perform advanced welding of plastic materials |
LMTTF2014A |
LMTTF3005A |
Apply lofting skills to sail making |
|
LMTTF3006A |
Cut and join sail panels |
GROUP C
Unit code |
Unit title |
Prerequisites |
LMTTF2001A |
Despatch products |
|
LMTTF2003A |
Package and handle products for despatch |
|
LMTTF2004A |
Add reinforcements and attachments |
|
LMTTF2007A |
Produce patterns for 2D products |
|
LMTTF2008A |
Use adhesives |
|
LMTTF2010A |
Lay out and mark out canvas or sail materials |
|
LMTTF2011A |
Cut and shape canvas or sail materials |
|
LMTTF2012A |
Stitch by hand |
|
LMTTF2013A |
Waterproof canvas product |
|
LMTTF2014A |
Weld plastic materials |
|
LMTTF2016A |
Install products on and off-site |
|
LMTTF2017A |
Cut, bend and shape metal |
|
LMTTF2019A |
Inspect canvas or sail product |
GROUP D
Unit code |
Unit title |
Prerequisites |
CPCCOHS2001A |
Apply OHS requirements, policies and procedures in the construction industry |
|
CPCCCM2002A |
Carry out excavation |
* |
CPCCCO2013A |
Carry out concreting to simple forms |
* |
LMTCL2001B |
Use a sewing machine |
|
LMTGN2004B |
Work in a team environment |
|
LMTGN2005B |
Perform minor maintenance |
|
LMTGN2008B |
Coordinate work of team or section |
|
LMTGN2009B |
Operate computing technology in a Textiles, Clothing and Footwear workplace |
|
LMTGN2010B |
Perform tasks to support production |
|
LMTLG2006A |
Identify materials used in leather goods production |
|
LMTTX2012B |
Perform industrial sewing on textile products |
|
MEM05012C |
Perform routine manual metal arc welding |
|
MEM05050B |
Perform routine gas metal arc welding |
|
AHCLSC308A |
Install metal structures and features |
GROUP E
Unit code |
Unit title |
Prerequisites |
MSS402010A |
Manage the impact of change on own work |
|
MSS403010A |
Facilitate change in an organisation implementing competitive systems and practices |
|
MSS402001A |
Apply competitive systems and practices |
|
MSS402002A |
Sustain process improvements |
|
MSS403001A |
Implement competitive systems and practices |
|
MSS403002A |
Ensure process improvements are sustained |
|
MSS402020A |
Apply quick changeover procedures |
|
MSS402021A |
Apply Just in Time procedures |
|
MSS402030A |
Apply cost factors to work practices |
|
MSS402031A |
Interpret product costs in terms of customer requirements |
|
MSS402040A |
Apply 5S procedures |
|
MSS402050A |
Monitor process capability |
|
MSS402060A |
Use planning software systems in operations |
|
MSS402061A |
Use SCADA systems in operations |
|
MSACMT270A |
Use sustainable energy practices |
|
MSS402080A |
Undertake root cause analysis |
|
MSS402081A |
Contribute to the application of a proactive maintenance strategy |
|
MSS403021A |
Facilitate a Just in Time system |
|
MSS403030A |
Improve cost factors in work practices |
|
MSS403032A |
Analyse manual handling processes |
|
MSS403040A |
Facilitate and improve implementation of 5S |
|
MSS404050A |
Undertake process capability improvements |
* |
MSS403051A |
Mistake proof an operational process |
|
MSS404052A |
Apply statistics to operational processes |
|
MSS404060A |
Facilitate the use of planning software systems in a work area or team |
|
MSS404061A |
Facilitate the use of SCADA systems in a team or work area |
|
MSS404081A |
Undertake proactive maintenance analyses |
|
MSS404082A |
Assist in implementing a proactive maintenance strategy |
GROUP F
Other Textile Fabrication units that are available at Certificates II (maximum 1 unit) and III (maximum 3 units) |
Other TCF Training Package units that are available at Certificates II (maximum 1 unit), III (maximum 3 units) and IV (maximum 1 unit) |
Units from other endorsed Training Packages and accredited courses that are available at Certificates II (maximum 1 unit), III (maximum 3 units) and IV (maximum 1 unit) |