Qualification details

LMT21607 - Certificate II in Technical Textiles and Non-wovens (Release 2)

Summary

Releases:
ReleaseStatusRelease date
2 (this release)Current 27/Jun/2012
(View details for release 1) Replaced16/Jul/2011

Usage recommendation:
Superseded
Mapping:
MappingNotesDate
Is superseded by MST20116 - Certificate II in TCF Production SupportSupersedes LMT21607 Certificate II in Technical Textiles and Non-wovens; LMT20607 Certificate II in Clothing Production (Intermediate); LMT20107 Certificate II in Textile Production (Intermediate); LMT20507 Certificate II in Textile Fabrication; LMT20707 Certificate II in Clothing Production (Complex or Multiple Processes); LMT20907 Certificate II in Footwear Production (Intermediate). Not Equivalent. 03/Jul/2016
Is superseded by MST20216 - Certificate II in TCF Production OperationsSupersedes LMT21607 Certificate II in Technical Textiles and Non-wovens. Not equivalent; LMT20507Certificate II in Textile Fabrication; LMT20207 Certificate II in Textile Production (Complex or Multiple Processes); LMT21007 Certificate II in Footwear Production (Complex or Multiple Processes); LMT20707Certificate II in Clothing Production (Complex or Multiple Processes). Not equivalent. 03/Jul/2016

Training packages that include this qualification

Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnEssential
LMTGN2001B - Follow defined OHS policies and proceduresFollow defined OHS policies and procedures N/A
LMTGN2002B - Apply quality standardsApply quality standards N/A
LMTGN2003B - Work in the Textiles, Clothing and Footwear industryWork in the Textiles, Clothing and Footwear industry N/A
LMTGN2004B - Work in a team environmentWork in a team environment N/A
LMTGN2005B - Perform minor maintenancePerform minor maintenance N/A
LMTGN2006B - Perform test or inspection to check product qualityPerform test or inspection to check product quality N/A
LMTGN2007B - Select, transfer and remove materials and productsSelect, transfer and remove materials and products N/A
LMTGN2008B - Coordinate work of team or sectionCoordinate work of team or section N/A
LMTGN2009B - Operate computing technology in a textiles, clothing and footwear workplaceOperate computing technology in a textiles, clothing and footwear workplace N/A
LMTGN2010B - Perform tasks to support productionPerform tasks to support production N/A
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 49

Classifications

SchemeCodeClassification value
ANZSCO Identifier 711700 Textile And Footwear Production MacHine Operators 
ASCO (occupation type) Identifier 7212-11 Yarn Carding And Spinning MacHine Operator 
ASCED Qualification/Course Field of Education Identifier 0301 Manufacturing Engineering And Technology 
Qualification/Course Level of Education Identifier 521 Certificate II 
Taxonomy - Industry Sector N/A Textiles 
Taxonomy - Occupation N/A Non-woven Production Operator 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 711700 Textile And Footwear Production MacHine Operators 23/Oct/2008 
ASCO (occupation type) Identifier 7212-11 Yarn Carding And Spinning MacHine Operator 23/Oct/2008 
ASCED Qualification/Course Field of Education Identifier 0301 Manufacturing Engineering And Technology 23/Oct/2008 
Qualification/Course Level of Education Identifier 521 Certificate II 28/Jul/2010 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Release 2 - imported units updated to current versions, outcomes equivalent.

Description

Job roles /employment outcomes 

Certificate II reflects vocational outcomes for those performing a range of technical and operational tasks within a production oriented work environment in a technical textile and non-woven manufacturing enterprise. Some multi-skilled roles can be accommodated in this qualification.

Application 

This qualification is typically used to develop skill and knowledge in the operations of technical textile and non-woven production enterprises. Work is generally supervised.

Pathways Information

Pathways into the qualification 

Direct entry into this qualification requires completion of a total of thirteen (13) units of competency according to the rules described below.

Units that have been achieved through completion of the LMT11107 Certificate I in Textiles Clothing and Footwear may be credited towards the Certificate II when they are also included in the unit lists for this qualification.

Pathways from the qualification 

Further training pathways from this qualification include LMT31807 Certificate III in Technical Textiles and Non-wovens.

Licensing/Regulatory Information

There are no specific licences that relate to this qualification. However, some units in this qualification may have licensing or regulatory requirements in some environments. Local regulations should be checked for details.

Entry Requirements

Not applicable.

Employability Skills Summary

EMPLOYABILITY SKILLS QUALIFICATION SUMMARY 

Employability Skills Summary  - Certificate II in Technical Textiles and Non-wovens 

The following table contains a summary of the Employability Skills as identified by the technical textile and non-woven industries for this qualification. This table should be interpreted in conjunction with the detailed requirements of each unit of competency packaged in this qualification. The outcomes described here are broad industry requirements that reflect skill requirements for this level.

Employability Skill 

Industry /enterprise requirements for this qualification include :

Communication 

  • complete written documentation and job tickets
  • use communication technologies efficiently
  • demonstrate effective and appropriate communication and interpersonal skills
  • interpret and apply workplace procedures and instructions
  • share workplace information
  • communicate information about problems with production work
  • read and understand job specifications
  • communicate information relating to OHS

Teamwork 

  • work independently or as part of a team
  • provide support to others in the work area
  • identify performance required to meet customer needs in own work and/or team
  • identify own role and responsibility within a team

Problem-solving 

  • identify and report any workplace hazards
  • identify production problems and make contributions to their solution
  • apply knowledge of materials, product purpose and processes to operations
  • check machine performance and identify signs of faulty operations
  • use material and process knowledge to solve problems
  • monitor workplace activities and identify and report faults or problems
  • recognise hazards and follow appropriate hazard control measures
  • identify and report potential environmental hazards

Initiative and enterprise 

  • provide feedback on procedures and processes
  • gather and interpret information
  • ask questions regarding requirements and expectations
  • make suggestions for continuous improvement
  • inspect quality of production on an ongoing basis
  • record basic information on the quality and other indicators of production performance

Planning and organising 

  • plan work activities
  • monitor production and work load priorities
  • select appropriate tools
  • identify requirements for materials, quality and production
  • identify and monitor resource use in own work
  • direct items to the correct area for further processing
  • identify and use relevant personal protective equipment
  • organise work area to maintain housekeeping standards

Self-management 

  • plan to meet own work requirements
  • keep the work area clean and tidy at all times
  • conduct regular housekeeping activities
  • interpret data and information as required by own job
  • monitor own work
  • conduct work in a manner which minimises waste
  • understand own work activities
  • identify personal responsibilities
  • accept responsibility for quality of own work
  • follow OHS practices during the production and manufacturing of production products

Learning 

  • assess own competencies in meeting job requirements
  • listen to feedback and advice of supervisors
  • identify own skill requirements and seek skill development if required
  • attend training or skill development activities
  • ask questions to expand own knowledge

Technology 

  • use appropriate tools, machines and equipment safely and effectively
  • use machinery to meet productivity requirements
  • perform minor maintenance on machinery in accordance with workplace practice
  • use manual handling technologies in the workplace
  • set up and adjust machinery and equipment

Packaging Rules

To be awarded the Certificate II in Technical Textiles and Non-wovens, competency must be achieved in thirteen (13) units of competency.

  • Four (4) core units of competency
  • Nine (9) elective units of competency as specified below.

Note: Where prerequisite units apply, these have been noted, and must be considered in the total number of units.

CORE UNITS 

Complete all four (4) units from this list

Unit code 

Unit title 

LMTGN2001B

Follow defined OH&S policies and procedures

LMTGN2002B

Apply quality standards

LMTGN2003B

Work in the Textiles, Clothing and Footwear industry

MSAENV272B

Participate in environmentally sustainable work practices

ELECTIVE UNITS 

Select nine (9) units as specified below.

  • A minimum of two (2) units must be selected from Group A
  • A maximum of one (1) unit may be selected from Group C
  • A maximum of two (2) units may be selected from Group D
  • The remainder must be selected from Groups A and B.

GROUP A 

Unit code 

Unit title 

Prerequisites 

LMTTN2001B

Set up and operate a dry laid web forming machine

LMTTN2002B

Set up and operate a spun bond web forming machine

LMTTN2003B

Use basic recognition techniques to identify technical and nonwoven textiles

LMTTN2004B

Undertake web bonding processes

LMTTN2005B

Undertake web conversion and finishing

LMTTN2006B

Identify purpose and performance outcomes of technical textile product

LMTTN2003B

LMTTN2007B

Conduct technical textile mechanical finishing processes

LMTTN2008B

Conduct heat setting on technical textiles

LMTTN2009B

Apply surface coating to technical textiles

LMTTN2010B

Apply laminations and fusible interlinings to technical textiles

LMTTN2011B

Undertake fibre blending and feeding for nonwoven technical production processes

GROUP B 

Unit code 

Unit title 

Prerequisites 

LMTGN2004B

Work in a team environment

LMTGN2005B

Perform minor maintenance

LMTGN2006B

Perform test or inspection to check product quality

LMTGN2007B

Select, transfer and remove materials and products

LMTGN2008B

Coordinate work of team or section

LMTGN2009B

Operate computing technology in a Textiles, Clothing and Footwear workplace

LMTGN2010B

Perform tasks to support production

LMTTX2001B

Identify fibres, yarns and textile materials and their uses in textile production

LMTTX2002B

Prepare yarn for textile manufacturing

LMTTX2003B

Perform spinning operations

LMTTX2005B

Perform creeling operations

LMTTX2006B

Operate a weaving loom

LMTTX2007B

Perform knitting operations

LMTTX2009B

Weigh and check textile materials and products

LMTTX2010B

Load and operate dyeing equipment

LMTTX2011B

Repair textile product

LMTTX2012B

Perform industrial sewing on textile products

LMTTX2013B

Conduct packaging or folding for textile production

LMTTX2014B

Use specialised machinery to assist textile production

LMTTX2019B

Undertake carding operations

GROUP C 

Unit code 

Unit title 

Prerequisites 

MSS402010A

Manage the impact of change on own work

MSS402001A

Apply competitive systems and practices

MSS402002A

Sustain process improvements

MSS402020A

Apply quick changeover procedures

MSS402021A

Apply Just in Time procedures

MSS402030A

Apply cost factors to work practices

MSS402031A

Interpret product costs in terms of customer requirements

MSS402040A

Apply 5S procedures

MSS402050A

Monitor process capability

MSS402060A

Use planning software systems in operations

MSS402061A

Use SCADA systems in operations

MSACMT270A

Use sustainable energy practices

MSS402080A

Undertake root cause analysis

MSS402081A

Contribute to the application of a proactive maintenance strategy

GROUP D 

Other Technical Textiles and Non-wovens units that are available at Certificates II (maximum 2 units) and III (maximum 1 unit)

Other TCF Training Package units that are available at Certificates II (maximum 2 units) and III (maximum 1 unit)

Units from other endorsed Training Packages and accredited courses that are available at Certificates I (maximum 1 unit), II (maximum 2 units) and III (maximum 1 unit)

Training component details
The following details are displayed for each different NRT:-

Training packages

- Training package details
- Training package components

Qualifications

- Qualification details
- Qualification components

Accredited courses

- Accredited course details

Modules

- Module details

Units of competency

- Units of competency details
- Unit components

Skill sets

- Skill set details
- Skill set components

Click on the Export link to export the NRT information to MS Word or PDF.

Click on the Manage notification link to create or change a notification for this NRT.

When selecting the Display history check box a set of tables will appear displaying a log of historical values describing what has changed and when over time.

If you have access to make changes to an NRT, click on the Edit link on the upper right hand side of the summary box.