Modification History
Not applicable.
Unit Descriptor
Unit descriptor |
This unit covers the installation and commissioning of CNC process and machine control programs in the furnishing industry. |
Application of the Unit
Application of the unit |
Licensing/Regulatory Information
Not applicable.
Pre-Requisites
Prerequisite units |
Nil |
|
Employability Skills Information
Employability skills |
This unit contains employability skills. |
Elements and Performance Criteria Pre-Content
Elements describe the essential outcomes of a unit of competency. |
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1. Prepare for software installation |
1.1. Program format and operational intent is accurately determined and required applications identified 1.2. Specifications are checked for required operating conditions 1.3. Program instructions are checked for compliance with specifications 1.4. Software timers are set to specification where required |
2. Install automatic process machine control program |
2.1. Appropriate program loading technique is selected 2.2. External loading devices are correctly connected to automatic process machine control systems 2.3. Machine control system is placed in correct operational mode to accept program loading 2.4. Program is downloaded in accordance with manufacturer recommended procedure and enterprise requirements 2.5. Checks are made during and after downloading to ensure accurate and complete data transfer 2.6. External program loading devices and connections are disconnected from process and machine control system |
3. Commission automatic process and machine control program |
3.1. Operation of the equipment using the program is observed 3.2. Outputs are checked and measured for compliance with specifications 3.3. External inputs are checked for compliance with specifications, according to specified procedures 3.4. Total operation is checked for compliance with specifications where applicable 3.5. Location of program master copy storage is confirmed |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
This section describes the skills and knowledge required for this unit. |
Required skills |
|
Required knowledge |
|
Evidence Guide
EVIDENCE GUIDE |
|
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. |
|
Critical aspects of evidence |
|
Resource implications |
CNC equipment, software, production materials. |
Method of assessment |
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts. Assessment should be by direct observation of tasks and questioning on underpinning knowledge. Assessment should be conducted over time and may be in conjunction with assessment of other units of competency |
Context of assessment |
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines. |
Range Statement
RANGE STATEMENT |
|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
|
Unit scope |
|
Unit context |
|
Workplace environment |
|
Machines |
Machines requiring CNC software installation and commission include individual production/manufacturing or treatment machines and processing and machining centres |
Personal protective equipment |
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices |
Information and procedures |
|
Unit Sector(s)
Unit sector |
Furnishing Technology |
Competency field
Competency field |
Co-requisite units
Co-requisite units |
||