Unit of competency details

LMFFL3207A - Install carpet floor coverings to custom design stairs (Release 1)


Usage recommendation:
Supersedes and is equivalent to LMFFC3005A - Install carpet floor coverings to stairsInstall carpet floor coverings to custom design stairs 12/May/2009
Is superseded by and equivalent to MSFFL3011 - Install carpet floor coverings to custom design stairsSupersedes and is equivalent to LMFFL3207A Install carpet floor coverings to custom design stairs 09/Dec/2013

ReleaseRelease date
1 1 (this release) 11/May/2009


SchemeCodeClassification value
ASCED Module/Unit of Competency Field of Education Identifier 040321 Floor Coverings  

Classification history

SchemeCodeClassification valueStart dateEnd date
ASCED Module/Unit of Competency Field of Education Identifier 040321 Floor Coverings  28/Apr/2009 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Not applicable.

Unit Descriptor

Unit descriptor 

This unit covers the competencies required to install plain and patterned carpet floor coverings to angular, curved, rounded and wrap-rounded stairs, including patterns, metal moulding and decorative finishes using adhesive bonded and carpet gripper systems, including planning, preparation, cutting, joining and fixing

Application of the Unit

Application of the unit 

This unit supports the attainment of skills and knowledge required for competent workplace performance in the wide variety of flooring technology operations. The competency applies to a work room and on site environment and involves application of skills and knowledge at a trade worker level. These skills and knowledge are to be used within the scope of the individual's job and authority.

Licensing/Regulatory Information

Not applicable.


Prerequisite units 


Employability Skills Information

Employability skills 

This unit contains employability skills.

Elements and Performance Criteria Pre-Content

Elements describe the essential outcomes of a unit of competency.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide.

Elements and Performance Criteria



1. Prepare for installation

1.1. Applicable legislative , OHS  and organisational  requirements relevant to installing carpet floor coverings  to custom designed stairs are verified and complied with

1.2. Instructions  and/or plans are read and interpreted to identify the process required to complete work tasks

1.3. Floor condition is assessed for suitability for installation of unpatterned tufted and bonded carpet

1.4. Tools , equipment  and materials  are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition

1.5. Sequence of work is planned, including the starting point, to ensure efficiency and quality of installation

2. Set out materials

2.1. Carpet to be installed is checked against order

2.2. Carpet floor coverings are acclimatised according to manufacturer recommendations

2.3. Stairway  or step is measured and the required amount of floor covering, and underlay including allowances for type of stairs, is calculated and obtained

2.4. Suitable adhesives, gripper strips and edge strips are selected

2.5. Work lines and starting point are established

2.6. Gripper strips (if required) are cut and installed as specified in AS/NZS2455.1.1995

2.7. Underlay (if required) is checked against specified type and fitted as specified in AS/NZS2455.1.1995

3. Lay floor coverings

3.1. Instructions and sequence for laying and fixing are followed

3.2. Carpet floor coverings are laid out to meet allowances for type of stair requirements and minimise waste

3.3. Carpet floor coverings are accurately and clearly marked for cutting

3.4. Carpet floor coverings are cut to required shape with minimum waste of materials and laid

3.5. Instructions, sequence, fixing methods and equipment are used following specifications and Australian Standards AS/NZS2455.1.1995

3.6. Installation is completed to specification

3.7. Finished stairway is checked for flaws in installation and materials and faults rectified

4. Complete housekeeping

4.1. Unused materials are stored or recycled as required

4.2. Tools and equipment are cleaned and stored appropriate

4.3. Work area is cleaned and rubbish disposed of appropriate

4.4. Workplace documentation and/or reports are completed

Required Skills and Knowledge


This section describes the skills and knowledge required for this unit.

Required skills 

  • collect, organise and understand information related to work orders, basic plans and safety procedures
  • communicate ideas and information to enable confirmation of work requirements and specifications, coordination of work with site supervisor, other workers and customers, and the reporting of work outcomes and problems
  • work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity
  • use pre-checking and inspection techniques to anticipate problems installing carpet floor coverings to custom designed stairs to avoid rework and wastage
  • recognise and respond to circumstances outside instructions or personal competence
  • plan and organise activities including the preparation and layout of the worksite and the obtaining of equipment and materials to avoid any back tracking, work flow interruptions or wastage
  • use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate other material requirements
  • clarify and confirm work instructions
  • plan work within given task parameters
  • accept responsibility for given tasks
  • set, monitor and satisfy personal work goals
  • satisfy the competency requirements for the job
  • maintain current knowledge of:
  • tools and materials
  • installation techniques
  • seek learning opportunities
  • use the limited workplace technology related to the installation of carpet floor covering to custom designed stairs including tools, equipment, calculators and measuring devices

Required knowledge 

  • State or Territory OHS legislation, regulations, standards and codes of practice relevant to installing carpet floor coverings to custom designed stairs
  • organisational and site standards, requirements, policies and procedures for installing carpet floor coverings to custom designed stairs
  • environmental protection requirements
  • established communication channels and protocols
  • problem identification and resolution
  • types of tools and equipment and procedures for their safe use, operation and maintenance
  • characteristics of materials, products and defects
  • set up and operation of equipment
  • products assembly techniques
  • procedures for the recording, reporting and maintenance of workplace records and information
  • appropriate mathematical procedures for estimation and measurement
  • types and characteristics of stairways
  • types and uses of carpet installation tools, equipment and materials
  • types, uses and limitations of stairway carpet fixing techniques
  • the characteristics of timber and concrete sub-floors
  • workplace safety system requirements related to stairway carpet installation
  • work flow in relation to the installation of carpets on stairways

Evidence Guide


The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit 

  • Comply with legislation, regulations, standards, codes of practice and established safe practices and procedures for installing carpet to custom designed stairs
  • Interpret work order and locate and apply relevant information
  • Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
  • Follow work instructions, operating procedures and inspection practices to:
  • prevent damage to goods, equipment and products
  • maintain required production output and product quality
  • minimise the risk of injury to self and others
  • Complete a minimum of:
  • the installation of one tufted carpet and one patterned woven carpet to:
  • concrete or timber staircases
  • open newell
  • bullnose step
  • circular
  • recessed steps
  • open tread
  • Work effectively with others
  • Modify activities to cater for variations in workplace contexts and environment

Context of , and specific resources for assessment 

  • The application of competency is to be assessed in the workplace or realistically simulated workplace
  • Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints
  • Assessment of essential underpinning knowledge, other than confirmatory questions, will usually be conducted in an off-site context
  • Assessment is to comply with relevant regulatory or Australian Standards requirements
  • The following resources should be made available:
  • workplace location or simulated workplace
  • materials and equipment relevant to installing carpet floor coverings to customer designed stairs
  • specifications and work instructions

Method of assessment 

Assessment must satisfy the endorsed assessment guidelines of the Furnishing Industry Training Package

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge

Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application

Assessment may be applied under project related conditions (real or simulated) and require evidence of process

Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances

Assessment may be in conjunction with assessment of other units of competency

Range Statement


The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Legislative requirements 

  • are to be in accordance with applicable legislation from all levels of government that affect organisational operation. Requirements may include but not be limited to award and enterprise agreements, industrial relations, Australian Standards, confidentiality and privacy, OHS, the environment, equal opportunity, anti-discrimination, relevant industry codes of practice, duty of care and heritage

OHS requirements 

  • are to be in accordance with Commonwealth, State or Territory legislation and regulations, organisational safety policies and procedures. Requirements may include but not be limited to the use of personal protective equipment and clothing, fire fighting equipment, First Aid equipment, hazard and risk control and elimination, control of hazardous materials and substances, manual handling including lifting and carrying

Organisational requirements 

  • may include but not be limited to legal, organisational and site guidelines, policies and procedures relating to own role and responsibility, quality assurance, procedural manuals, quality and continuous improvement processes and standards, OHS, emergency and evacuation, ethical standards, recording and reporting, access and equity principles and practices, equipment use, maintenance and storage, environmental management (waste disposal, recycling and re-use guidelines)

Carpet floor coverings 

  • may include tufted carpet, woven carpet, needle punch carpet and fusion bonded carpet


  • Workplace procedures relating to the use and operation of tools and equipment
  • Workplace instructions, including job sheets, plans, drawings and designs
  • Workplace procedures relating to reporting and communications
  • Manufacturer instructions for the use of equipment and materials

Tools and equipment 

  • are to include knee kicker, stair tool, carpet gripper cutters, trimmer, hammer, staple hammer, compressor, air staple gun, utility knife, straight edge, drill, hacksaws and sewing needles


  • may include but are not limited to underlay, tapes and adhesives, trims, nosing, smooth edges and accessories


  • may include open newell, bullnose steps, circular, recessed steps, open tread, box steps and kit winder treads

Unit Sector(s)

Unit sector 

Flooring Technology

Competency field

Competency field 


Co-requisite units

Co-requisite units