Modification History
Not applicable.
Unit Descriptor
Unit descriptor |
This unit specifies the outcomes required to construct aluminium roll up style awnings for exterior applications |
Application of the Unit
Application of the unit |
This unit applies to the skills and knowledge required to construct aluminium roll up style awnings. The unit applies in a workplace environment and may be conducted in small to large scale enterprises. Applications may include some complex or non routine activities involving individual responsibility or autonomy and collaboration with others through members of groups or teams |
Licensing/Regulatory Information
Not applicable.
Pre-Requisites
Prerequisite units |
Nil |
|
Employability Skills Information
Employability skills |
This unit contains employability skills. |
Elements and Performance Criteria Pre-Content
Elements describe the essential outcomes of a unit of competency. |
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1. Establish work requirements and prepare for work |
1.1. OHS requirements , legislative requirements and workplace practices are observed throughout the work 1.2. Personal protective equipment is selected and used 1.3. Work orders are checked and confirmed 1.4. Tools and equipment are selected and checked for safe operation 1.5. Aluminium stock and hardware is selected and checked against work requirements. |
2. Cut materials ready for assembly |
2.1. Hoodbox, roller and bottom rail are cut 2.2. Spring is selected according to manufacturer specifications 2.3. Aluminium panels are cut 2.4. Measurements are checked against work order |
3. Construct awning |
3.1. Aluminium panels are joined to form awning skin 3.2. Roller and bottom rail are installed to skin 3.3. Spring and pin end are fitted to roller 3.4. End caps and pull ring are installed to bottom rail |
4. Apply quality checks |
4.1. Completed awnings are checked ensuring finished product matches work order 4.2. Finished blind is tested for correct operation 4.3. Parts of the work that do not comply with work order are repaired or reworked |
5. Complete work |
5.1. Arms and fittings are selected ready for installation 5.2. Finished work is cleaned, packaged with installation hardware and stored following workplace practices 5.3. Tools and equipment are cleaned, maintained and stored 5.4. Faulty tools and equipment are reported to appropriate personnel 5.5. Work area is cleaned and waste is disposed of according to workplace procedures 5.6. Workplace documentation or reporting is completed |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
This section describes the skills and knowledge required for this unit. |
Required skills |
|
Required knowledge |
|
Evidence Guide
EVIDENCE GUIDE |
|
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. |
|
Critical aspects for assessment and evidence required to demonstrate competency in this unit |
|
Context of , and specific resources for assessment |
|
Method of assessment |
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of required knowledge and skills Assessment methods should be by direct observation of tasks and include questioning on required knowledge and skills to ensure its correct interpretation and application Assessment should be conducted over time and may be in conjunction with assessment of other units of competency |
Range Statement
RANGE STATEMENT |
|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
|
OHS requirements |
|
Legislative requirements |
|
Workplace practices |
|
Personal protective equipment |
|
Work order |
|
Hardware |
|
Tools and equipment |
|
Manufacturer instructions |
|
Joined |
|
Tested |
|
Appropriate personnel |
|
Waste |
|
Workplace documentation |
|
Unit Sector(s)
Unit sector |
Blinds and awnings |
Competency field
Competency field |
Co-requisite units
Co-requisite units |
||