Modification History
Three additional elective units added to Group A and two additional elective units added to Group B to support installation job roles and licensing. Qualification outcomes remain equivalent.
Description
This qualification describes the skills and knowledge required to perform basic tasks in blind and awning manufacture involving known routines and procedures and some accountability for the quality of outcomes.
Job roles /employment outcomes
The LMF21008 Certificate II in Blinds and Awnings reflects vocational outcomes for those performing job roles in construction of a range of blinds and awnings using textiles, timber, plastic, steel and aluminium.
Application
This qualification is typically used to develop skills and knowledge in blind and awning manufacturing processes where there is a clearly defined range of contexts in which the choice of actions required is usually clear and there is limited complexity in the range of options to be applied. It could include collaboration with others through members of a group or team.
Pathways into the qualification
This qualification may be accessed by direct entry. Credit can be granted towards this qualification by those who have completed LMF10108 Certificate I in Furnishing or achieved equivalent industry experience.
Pathways from the qualification
Further training pathways from this qualification may include LMF31808 Certificate III in Blinds and Awnings and relevant supervisory, management or competitive manufacturing qualifications.
Pathways Information
Not applicable.
Licensing/Regulatory Information
There are no specific licences that relate to this qualification. However, depending on the jurisdiction, licensing or regulatory requirements may apply to the use of some units in this qualification. Local regulations should be checked for details.
Note that a license is required in NSW for shade sails and systems installers.
Entry Requirements
Not applicable.
Employability Skills Summary
|
Employability Skill |
Industry /enterprise requirements for this qualification include : |
|
Communication |
|
|
Teamwork |
|
|
Problem-solving |
|
|
Initiative and enterprise |
|
|
Planning and organising |
|
|
Self-management |
|
|
Learning |
|
|
Technology |
|
Packaging Rules
Packaging Rules
To be awarded the LMF21008 Certificate II in Blinds and Awnings, competency must be achieved in fourteen (14 ) units of competency.
- six (6 ) core units of competency
- eight (8 ) elective units of competency.
Note: Where prerequisite units apply, these have been listed, and must be considered in the total number of units.
CORE UNITS
Complete all six (6 ) units from this list.
|
Unit code |
Unit title |
Prerequisites |
|
LMFBA2001A |
Use blinds and awnings sector hand and power tools |
|
|
MSAENV272B |
Participate in environmentally sustainable work practices |
|
|
MSAPMOHS100A |
Follow OHS procedures |
|
|
MSAPMOPS101A |
Make measurements |
|
|
MSAPMSUP102A |
Communicate in the workplace |
|
|
MSAPMSUP106A |
Work in a team |
ELECTIVE UNITS
Select eight (8 ) units from Groups A, B and C as specified below.
Group A
Select a minimum of four (4 ) units from Group A
|
Unit code |
Unit title |
Prerequisites |
|
AHCLSC308A |
Install metal structures and features |
|
|
LMFBA2004A |
Select and apply blinds and awnings sector hardware and fixings |
|
|
LMFBA2005A |
Construct roll up and pull down style blinds and awnings |
|
|
LMFGN3001B |
Read and interpret work documents |
|
|
LMFSF2001B |
Cut single layer fabrics |
|
|
LMFSF2002B |
Machine sew materials |
|
|
LMTTF2009A |
Identify and select canvas and sail materials |
|
|
LMTTF2016A |
Install products on and off-site |
Group B
Select at least one (1 ) and up to three (3 ) units from Group B
|
Unit code |
Unit title |
Prerequisites |
|
BSBADM311A |
Maintain business resources |
|
|
BSBCUS201A |
Deliver a service to customers |
|
|
BSBCUS301A |
Deliver and monitor a service to customers |
|
|
BSBINN201A |
Contribute to workplace innovation |
|
|
BSBITU101A |
Operate a personal computer |
|
|
BSBITU306A |
Design and produce business documents |
|
|
CPCCCO2013A |
Carry out concreting to simple forms |
CPCCOHS2001A |
|
CPCCOHS2001A |
Apply OHS requirements, policies and procedures in the construction industry |
|
|
LMFBA2002A |
Set up, operate and maintain blinds and awnings sector static machines |
|
|
LMFBA2006A |
Construct vertical-style blinds |
|
|
LMFBA2007A |
Construct textiles for canopy-style awnings |
|
|
LMFBA2008A |
Construct plastic and timber Venetian-style blinds |
|
|
LMFBA2009A |
Construct aluminium Venetian-style blinds |
|
|
LMFBA2010A |
Construct metal louvre and canopy hooded style awnings |
|
|
LMFBA2011A |
Construct aluminium roll up style awnings |
|
|
LMFGN2002B |
Move and store materials and products |
|
|
LMTTF2014A |
Weld plastic materials |
|
|
TLIA1107C |
Package goods |
Group C
Up to three (3 ) relevant units may be chosen from other units not already selected from Groups A and B, or units available in this Training Package or other endorsed Training Packages and accredited courses. The units must be aligned at Certificate II or Certificate III level (a maximum of 1 from Certificate III)
Units selected from other Training Packages and accredited courses via Group C must be relevant to the qualification outcome and not duplicate units available within this qualification.
If Competitive Manufacturing units are chosen (identified as MSACM in the code), these should only be selected on the basis of work requirements.
