^
 
 

Qualification details

LMF20602 - Certificate II in Picture Framing (Release 1)

Summary

Usage recommendation:
Deleted
The Deleted usage recommendation was implemented on 13 June 2017 to describe training components that have no replacement. Enrolments in training components and statements of attainment or qualifications issued before 13 June 2017 are valid. For any components marked as deleted after 13 June 2017, the applicable transition/teach-out periods apply. For specific questions regarding the enrolment, delivery or issuance of a statement of attainment/qualification, please contact your training regulator.
Mapping:
MappingNotesDate
DeletedDeleted from LMF02 Furnishing Training Package09/Dec/2013

Releases:
ReleaseRelease date
1 1 (this release) 11/May/2009

Delivery:
Find RTOs approved to deliver this qualification.

Training packages that include this qualification

Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnUsage RecommendationSort Table listing Units of Competency by the Usage Recommendation columnEssentialSort Table listing Units of Competency by the Essential column
Modify filter options of the 'Essential' column in Table listing Units of Competency
MSAPMOPS101A - Make measurementsMake measurementsSupersededN/A
LMFPF2005B - Cut mat boardsCut mat boardsSupersededN/A
MSAPMOHS100A - Follow OHS proceduresFollow OHS proceduresSupersededN/A
MSAPMSUP106A - Work in a teamWork in a teamSupersededN/A
LMFPF2004B - Mount artworkMount artworkSupersededN/A
LMFPF2006B - Cut and handle glazing materials for framingCut and handle glazing materials for framingSupersededN/A
LMFPF2003B - Join mouldingsJoin mouldingsSupersededN/A
LMFPF2008B - Recognise and repair finishes of framing materialsRecognise and repair finishes of framing materialsSupersededN/A
LMFPF2001B - Use picture framing sector hand and power toolsUse picture framing sector hand and power toolsSupersededN/A
LMFPF2007B - Assemble artwork package (basic)Assemble artwork package (basic)SupersededN/A
MSAENV272B - Participate in environmentally sustainable work practicesParticipate in environmentally sustainable work practicesSupersededN/A
LMFPF2002B - Cut mouldings to lengthCut mouldings to lengthSupersededN/A
Refresh information in 'Table listing Units of Competency'
Navigate to first page in table listing Units of Competency.Navigate to previous page in table listing Units of Competency.
Navigate to page 1 in table listing Units of Competency
Navigate to the next page in table listing Units of Competency.Navigate to the last page in table listing Units of Competency.
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 12 of 12

Classifications

SchemeCodeClassification value
ANZSCO Identifier 394212 Picture Framer 
ASCO (occupation type) Identifier 7914-13 Home Improvements Installer 
ASCED Qualification/Course Field of Education Identifier 0301 Manufacturing Engineering And Technology 
Qualification/Course Level of Education Identifier 521 Certificate II 
Taxonomy - Industry Sector N/A Visual Arts and Craft 
Taxonomy - Occupation N/A Picture Framing Factory Worker 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 394212 Picture Framer 02/Feb/2007 
ASCO (occupation type) Identifier 7914-13 Home Improvements Installer 01/Aug/2003 
ASCED Qualification/Course Field of Education Identifier 0301 Manufacturing Engineering And Technology 01/Aug/2003 
Qualification/Course Level of Education Identifier 521 Certificate II 11/May/2009 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Content

Compare:
Compare content of this qualification with other releases or training components
Download:

Modification History

Not applicable.

Description

This qualification describes the skills and knowledge required to perform basis tasks in the picture framing sector that could include mounting artwork and glazing frames involving known routines and procedures and some accountability for the quality of outcomes.

Job roles /employment outcomes 

The LMF20602 Certificate II in Picture Framing reflects vocational outcomes for those performing picture framing job roles.

Application 

This qualification is typically used to develop picture framing skills and knowledge and perform varied activities or knowledge applications where there is a clearly defined range of contexts in which the choice of actions required is usually clear and there is limited complexity in the range of options to be applied. It can involve collaboration with others through membership of a group or team.

Pathways into the qualification 

This qualification may be accessed by direct entry. Credit can be granted towards this qualification by those who have completed LMF10108 Certificate I in Furnishing or achieved equivalent industry experience.

Pathways from the qualification 

Further training pathways from this qualification may include LMF30802 Certificate III in Picture Framing and relevant supervisory, management or competitive manufacturing qualifications.

Licensing considerations 

There are no specific licences that relate to this qualification. However, depending on the jurisdiction, licensing or regulatory requirements may apply to the use of some units in this qualification. Local regulations should be checked for details.

Pathways Information

Not applicable.

Licensing/Regulatory Information

Not applicable.

Entry Requirements

Not applicable.

Employability Skills Summary

EMPLOYABILITY SKILLS QUALIFICATION SUMMARY 

Employability Skill 

Industry /enterprise requirements for this qualification include :

Communication
  • complete written documentation
  • use communication technologies efficiently
  • demonstrate effective and appropriate communication and interpersonal skills
  • interpret and apply workplace procedures and instructions
  • share workplace information
  • communicate information about problems with work
  • read and understand job specifications
  • communicate information relating to OHS

Teamwork
  • work independently and as part of a team
  • provide support to others in the work area
  • identify performance required to meet customer needs in own work and/or team
  • identify own role and responsibility within a team

Problem-solving
  • identify and report any workplace hazards
  • identify production problems and make contributions to their solution
  • apply knowledge of materials, product purpose and processes to operations
  • check machine performance and identify signs of faulty operations
  • use material and process knowledge to solve problems
  • monitor workplace activities and identify and report faults or problems
  • recognise hazards and follow appropriate hazard control measures

Initiative and enterprise
  • provide feedback on procedures and processes
  • gather and interpret information
  • ask questions regarding requirements and expectations
  • make suggestions for continuous improvement
  • inspect quality of production on an ongoing basis
  • record basic information on the quality and other indicators of production performance

Planning and organising
  • plan work activities
  • monitor production and work load priorities
  • select appropriate tools
  • identify requirements for materials, quality and production
  • direct items to the correct area for further processing
  • identify and use relevant personal protective equipment
  • organise work area to maintain housekeeping standards

Self-management
  • plan to meet own work requirements
  • keep the work area clean and tidy at all times
  • conduct regular housekeeping activities
  • interpret data and information as required by own job
  • monitor own work
  • understand own work activities
  • identify personal responsibilities
  • accept responsibility for quality of own work
  • follow OHS practices during the production and manufacturing of products

Learning
  • assess own competencies in meeting job requirements
  • listen to feedback and advice of supervisors
  • identify own skill requirements and seek skill development if required
  • attend training or skill development activities
  • ask questions to expand own knowledge

Technology
  • use appropriate tools, machines and equipment safely and effectively
  • use machinery to meet productivity requirements
  • perform minor maintenance on machinery in accordance with workplace practice
  • use manual handling technologies in the workplace
  • set up and adjust tools and equipment

Packaging Rules

Packaging Rules 

To be awarded the LMF20602 Certificate II in Picture Framing, competency must be achieved in thirteen  (13 ) units of competency:

  • seven  (7 ) core units of competency
  • six  (6 ) elective units of competency.

Note: Where prerequisite units apply, these have been listed, and must be considered in the total number of units.

CORE UNITS 

Complete all seven  (7 ) units from this list.

Unit code 

Unit title 

Prerequisites 

LMFPF2001B

Use picture framing sector hand and power tools

LMFPF2002B

Cut mouldings to length

MSAENV272B

Participate in environmentally sustainable work practices

MSAPMOHS100A

Follow OHS procedures

MSAPMOPS101A

Make measurements

MSAPMPSUP102A

Communicate in the workplace

MSAPMSUP106A

Work in a team

ELECTIVE UNITS 

Select six  (6 ) units from Groups A and B as specified below:

Group A 

Select a minimum of three  (3 ) units from Group A

Unit code 

Unit title 

Prerequisites 

LMFPF2004B

Mount artwork

LMFPF2006B

Cut and handle glazing materials for framing

LMFPF2007B

Assemble artwork package (basic)

LMFPF2008B

Recognise and repair finishes of framing materials

LMFPF2003B

Join mouldings

LMFPF2005B

Cut mat boards

Group B 

Up to three  (3 ) relevant units may be chosen from units not already selected in Group A, or units available in this Training Package, other endorsed Training Packages and accredited courses. Those units must be aligned at Certificate II or Certificate III level (maximum 2 Certificate III aligned units).

Units selected from other Training Packages and accredited courses via Group B must be relevant to the qualification outcome and not duplicate units available within this qualification.

If Competitive Manufacturing units are chosen (identified as MSACM in the code), these should only be selected on the basis of work requirements.

Back to top