Modification History
Release |
Comments |
Release 2 |
This version first released with the Information and Communications Technology Training Package Version 8.0. The following units of competency were replaced with the relevant superseding unit of competency as requested by the Department of Education, Skills and Employment:
|
Release 1 |
This version released with ICT Information and Communications Technology Training Package Version 5.0. |
Qualification Description
This qualification is for telecommunications operators working on the construction and maintenance of high-speed national broadband network (NBN) infrastructure, and on required technology.
Telecommunications technology operators may:
- perform equipment and system installation work on a customer network to enable efficient access and interconnection to the NBN services, including connecting and jointing of copper cable, diagnosing and rectifying copper cable system faults, and migrating, remediating and augmentation of copper services to maximise benefits of the high-speed broadband connection
- splice, test and fault-find on live fibre cable in the NBN fibre distribution network
- perform equipment and system installation work on a customer network to enable efficient access and interconnection to the NBN services, including diagnosing and rectifying fibre system faults, working with active equipment, and performing integration and commissioning activities to maximise benefits of the high-speed broadband connection
- perform underground and aerial equipment and system installations from the tap to the optical node to enable efficient access and interconnection to the NBN services, including connecting and terminating hybrid fibre coaxial (HFC) cabling, diagnosing and rectifying HFC system faults
- install, activate and assure HFC equipment and systems from the last connection point of the network to the customer premises – tap to network termination device (NTD) – to enable efficient access and interconnection to the NBN services.
Licensing/Regulatory Information
Work functions in the occupational areas where this qualification may be used are subject to regulatory requirements. Refer to the ICT Information and Communications Technology Training Package Companion Volume Implementation Guide or the relevant regulator for details of licensing, legislative or certification requirements.
Cabling at the customer premises downstream of the NTD must be carried out according to requirements of the Australian Communications and Media Authority (ACMA) and relevant industry registration bodies, and in line with the specifications of the access network owner.
Entry Requirements
Nil
Packaging Rules
Total number of units = 14
6 core units, plus
8 elective units
The elective units selected may consist of:
- up to 8 units from Group A Copper Cabling, or Group B Fibre Cabling, and/or Group C HFC Cabling
- up to 5 units from Group D General
- up to 2 units from this or any currently endorsed Training Package or accredited course where the units are packaged in an Australian Qualification Framework (AQF) Level 3 or 4 qualification.
Elective units must be relevant to the work environment and the qualification, maintain the integrity of the AQF alignment and contribute to a valid, industry-supported vocational outcome.
Units selected from other Training Packages or accredited courses must not duplicate units selected from, or available within, the ICT Information and Communications Technology Training Package.
Core units
ICTTEN202 Use hand and power tools
ICTTEN208 Use electrical skills when working with telecommunications networks
ICTTEN315 Determine and apply technologies within a telecommunications system
ICTTEN317 Locate, identify and rectify telecommunications network faults
ICTWHS204 Follow work health and safety and environmental policy and procedures
ICTWOR308 Provide customer service to telecommunications customers
Elective units
Group A Copper Cabling
ICTCBL254 Joint metallic conductor cable in access network
ICTCBL313 Modify and cutover cable
ICTCBL319 Rearrange large size copper cable
ICTCBL320 Jumper metallic conductor cable in the access network
ICTCBL326 Cut over metallic conductor cable in the access network
ICTCBL332 Locate, identify and rectify copper cable faults
ICTCBL336 Install and cut over metallic conductor cable to access network cabinet
Group B Fibre Cabling
ICTBWN302 Install optical fibre splitters in fibre distribution hubs
ICTBWN309 Perform tests on optical communication system and components
ICTCBL316 Install ribbon fibre cable in the FTTX distribution network*
ICTCBL322 Install, test and terminate optical fibre cable on customer premises
ICTCBL330 Splice and terminate optical fibre cable for telecommunications projects
ICTTEN318 Inspect, clean and handle optical fibre cable and connectors
ICTTEN409 Commission an electronic system
ICTTEN416 Install, configure and test an internet protocol network
Group C HFC Cabling
ICTCBL248 Install and terminate hard-line coaxial cable
ICTCBL251 Install aerial and underground cable lead-ins
ICTCBL303 Install and terminate coaxial cable
ICTCBL306 Locate and identify cable system faults
ICTCBL333 Install aerial cable for communications applications
ICTCBL335 Construct aerial cable supports
ICTDRE303 Install a complex digital reception system
ICTDRE308 Install a cable broadband multi-dwelling unit system
ICTDRE314 Design communications wiring systems for customer premises*
ICTRFN406 Maintain hybrid fibre coaxial broadband cable network
Group D General
BSBSUS201 Participate in environmentally sustainable work practices
BSBSUS401 Implement and monitor environmentally sustainable work practices
CPCCCM2007 Use explosive power tools*
CPCCDE3014A Remove non-friable asbestos*
CPCCOHS1001A Work safely in the construction industry
CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
CPCPCM2043A Carry out WHS requirements
ICTBWN308 Work safely on live optical fibre installations*
ICTBWN303 Install lead-in module and cable for fibre to the premises
ICTBWN306 Use radio frequency measuring instruments
ICTBWN307 Use optical measuring instruments
HLTAID009 Provide cardiopulmonary resuscitation
ICTCBL246 Install, maintain and modify customer premises communications cabling: ACMA Restricted Rule*
ICTCBL247 Install maintain and modify customer premises communications cabling: ACMA Open Rule*
ICTCBL249 Haul underground cable for installation and maintenance work
ICTCBL254 Joint metallic conductor cable in access network
ICTCBL329 Install underground cable for communications applications
ICTCBL334 Install underground enclosures and conduit
ICTTEN207 Install and test internet protocol devices in convergence networks
ICTTEN310 Remove and replace electronic circuit boards in carrier equipment
ICTTEN312 Install telecommunications network equipment
ICTTEN313 Work on and resolve recurrent network faults
ICTWHS201 Provide telecommunications services safely on roofs
OR
RIIWHS204D Work safely at heights
ICTWHS205 Work safely near power infrastructure at a telecommunications workplace
OR
UETTDREL14A Working safely near live electrical apparatus as a non-electrical worker
ICTWOR202 Work effectively in the digital and telecommunications industry
ICTWOR305 Supervise worksite activities
RIICCM202D Identify, locate and protect underground services
RIIWHS202D Enter and work in confined spaces
RIIWHS205D Control traffic with stop-slow bat
RIIWHS302D Implement traffic management plan
TLID2010 Operate a forklift
*Note the following prerequisite unit requirements:
Prerequisite unit requirements in this qualification |
|
Unit in this qualification |
Prerequisite unit |
CPCCCM2007 Use explosive power tools |
CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry |
CPCCDE3014A Remove non-friable asbestos |
CPCCOHS1001A Work safely in the construction industry |
ICTBWN308 Work safely on live optical fibre installations |
ICTBWN307 Use optical measuring instruments ICTWHS204 Follow work health and safety and environmental policy and procedures |
ICTCBL246 Install, maintain and modify customer premises communications cabling: ACMA Restricted Rule |
ICTTEN208 Use electrical skills when working with telecommunications networks ICTWHS204 Follow work health and safety and environmental policy and procedures |
ICTCBL247 Install, maintain and modify customer premises communications cabling: ACMA Open Rule |
ICTTEN208 Use electrical skills when working with telecommunications networks ICTWHS204 Follow work health and safety and environmental policy and procedures |
ICTCBL316 Install ribbon fibre cable in the FTTX distribution network |
ICTCBL330 Splice and terminate optical fibre cable for telecommunications projects |
ICTDRE314 Design communications wiring systems for customer premises |
ICTCBL247 Install, maintain and modify customer premises communications cabling: ACMA Open Rule |
Specialisations
Where relevant, specialisations can be used for this qualification in:
- copper cable jointer
- fibre splicer
- fibre technician
- HFC technician
- telecommunications customer service technician – HFC technician.
The achievement of a specialisation will be identified on testamurs as follows:
- ICT30419 Certificate III in Telecommunications Network Build and Operation (Copper Cable Jointer)
- ICT30419 Certificate III in Telecommunications Network Build and Operation (Fibre Splicer)
- ICT30419 Certificate III in Telecommunications Network Build and Operation (Fibre Technician)
- ICT30419 Certificate III in Telecommunications Network Build and Operation (HFC Technician)
- ICT30419 Certificate III in Telecommunications Network Build and Operation (Telecommunications Customer Service Technician – HFC Technician).
Copper Cable Jointer
Select the following 6 elective units:
- ICTCBL254 Joint metallic conductor cable in access network
- ICTCBL319 Rearrange large size copper cable
- ICTCBL326 Cut over metallic conductor cable in the access network
- ICTCBL332 Locate, identify and rectify copper cable faults
- ICTCBL336 Install and cut over metallic conductor cable to access network cabinet
- ICTTEN312 Install telecommunications network equipment
Fibre Splicer
Select the following 6 elective units:
- ICTBWN302 Install optical fibre splitters in fibre distribution hubs
- ICTBWN307 Use optical measuring instruments
- ICTBWN308 Work safely on live optical fibre installations*
- ICTCBL316 Install ribbon fibre cable in the FTTX distribution network*
- ICTCBL330 Splice and terminate optical fibre cable for carriers and service projects
- ICTTEN318 Inspect, clean and handle optical fibre cable and connectors
Technician Fibre
Select the following 7 elective units:
- ICTBWN307 Use optical measuring instruments
- ICTBWN308 Work safely on live optical fibre installations*
- ICTCBL322 Install, test and terminate optical fibre cable on customer premises
- ICTTEN310 Remove and replace electronic circuit boards in carrier equipment
- ICTTEN318 Inspect, clean and handle optical fibre cable and connectors
- ICTTEN409 Commission an electronic system
- ICTTEN416 Install, configure and test an internet protocol network
Technician Hybrid Fibre Coaxial (HFC)
Select the following 5 elective units:
- ICTBWN306 Use radio frequency measuring instruments
- ICTCBL248 Install and terminate hard-line coaxial cable
- ICTCBL333 Install aerial cable for communications applications
- ICTTEN312 Install telecommunications network equipment
Plus
- ICTWHS201 Provide telecommunications services safely on roofs
or
- RIIWHS204D Work safely at heights
Telecommunications Customer Service Technician – HFC Technician
Select the following 8 elective units:
- ICTBWN306 Use radio frequency measuring instruments
- ICTCBL251 Install aerial and underground cable lead-ins
- ICTCBL303 Install and terminate coaxial cable
- ICTCBL306 Locate and identify cable system faults
- ICTDRE308 Install a cable broadband multi-dwelling unit system
- ICTDRE314 Design communications wiring systems for customer premises*
- ICTTEN207 Install and test internet protocol devices in convergence networks
- ICTTEN312 Install telecommunications network equipment
Qualification Mapping Information
No equivalent qualification. Supersedes and is not equivalent to ICT30415 Certificate III in Telecommunications Network Build and Operate.
Links
Companion Volume Implementation Guides are available from VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=a53af4e4-b400-484e-b778-71c9e9d6aff2