Modification History
Not applicable.
Unit Descriptor
Unit descriptor |
This unit describes the performance outcomes, skills and knowledge required to cover complex die cutting, embossing, folding, collating or fastening. |
Application of the Unit
Application of the unit |
This unit requires the individual to complete operations involving complex die cutting, embossing, folding, collating or fastening. |
Licensing/Regulatory Information
Not applicable.
Pre-Requisites
Prerequisite units |
||
Employability Skills Information
Employability skills |
This unit contains employability skills. |
Elements and Performance Criteria Pre-Content
Elements describe the essential outcomes of a unit of competency. |
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1. Maintain reel transportation system (OR Element 2) |
1.1. Reel stand and rewind section is monitored and adjusted to ensure efficient continuous operation 1.2. Web control system is monitored and adjusted to ensure correct tension and accurate continuous positioning of the web for efficient operation 1.3. Substrate is added and removed to and from the process according to job specifications 1.4. Delivery is monitored and adjusted to ensure quality and efficient product delivery 1.5. Sheeting section is monitored and adjusted to ensure quality and efficient product delivery |
2. Maintain sheet transportation system (OR Element 1) |
2.1. Feeder is monitored and adjusted to ensure continuous and efficient feeding to machine 2.2. Sheet pick-up and transport system is monitored and adjusted to ensure accurate and continuous sheet handling and efficient operation 2.3. Transfer systems are monitored and adjusted to ensure correct and continuous sheet handling and efficient operation 2.4. Substrate is added and removed to and from the process according to job specifications |
3. Maintain cutting system |
3.1. Knife or die condition is monitored and adjusted to ensure the quality of product meets the standard of the approved sample 3.2. Cutting pressures are monitored and adjusted to ensure the quality of product meets the standard of the approved sample 3.3. Registration of cutting devices and knives or dies are monitored and adjusted to ensure quality of product meets the standard of the approved sample 3.4. Packing of cutting devices or dies is monitored and adjusted to ensure quality of product meets the standard of the approved sample |
4. Maintain complex process |
4.1. Registration and squareness of folds are monitored and adjusted to ensure the quality of product meets the standard of the approved sample, if relevant 4.2. Collating /inserting process is monitored and adjusted to ensure quality of product meets the standard of the approved sample, if relevant |
5. Maintain operation of complex fastening (adhesive/mechanical/sewing) system (IF RELEVANT) |
5.1. Registration of fastening is monitored and adjusted to ensure quality of product meets the standard of the approved sample 5.2. Wire straightness, length, cut-off and clinching pressures are monitored and adjusted to ensure quality of product meets the standard of the approved sample 5.3. Adhesion is monitored and adjusted to ensure quality of product meets the standard of the approved sample 5.4. Thread tension and stitch quality are monitored and adjusted to ensure quality of product meets standard of the approved sample |
6. Maintain production process |
6.1. Production process is operated in association with fellow workers and according to enterprise procedures and planned daily schedule 6.2. Production is maintained according to OHS requirements, manufacturer's specifications and enterprise procedures 6.3. Manual and/or automatic control is used according to job specifications 6.4. Performance is monitored and verified using the process control system according to enterprise procedures 6.5. Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention 6.6. Process adjustments to eliminate problems are reported according to enterprise procedures 6.7. Faulty performance of equipment is identified and reported according to enterprise procedures 6.8. Waste is sorted according to enterprise procedures |
7. Identify and rectify problems or faults |
7.1. Product and substrate are monitored and tested to ensure conformance to client requirements 7.2. Problems in converting /finishing machine operation are identified and reported according to enterprise procedures 7.3. Adjustments or corrections are carried out according to specified procedures and manufacturer's specifications 7.4. Converting/finishing machine operation is checked to ensure correct operation |
8. Conduct shutdown of production process |
8.1. Correct shutdown sequence is followed according to manufacturer's specifications and enterprise procedures 8.2. Shutdown is conducted in association with fellow workers and in compliance with OHS requirements 8.3. Substrate waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures 8.4. Machine faults requiring repair are identified and reported to designated person according to enterprise procedures 8.5. Repair/adjustment is verified prior to resumption of operations |
9. Clean converting/finishing machine at end of run |
9.1. Cutting devices and knives or dies are cleaned or replaced ready for next run (IF RELEVANT) 9.2. Cutting devices are sharpened according to OHS procedures (IF RELEVANT) 9.3. Machine bed is cleaned ready for next run 9.4. All units are disengaged and cleaned ready for next run 9.5. Glue system is washed up ready for next run and liquid waste is disposed of according to regulatory requirements and enterprise procedures (IF RELEVANT) 9.6. Laminating machine is disengaged and cleaned ready for next run (IF RELEVANT) 9.7. Reel feed, transportation and delivery systems are disengaged and cleaned ready for next run OR 9.8. Sheet feed, transport and delivery systems are disengaged and cleaned ready for next run 9.9. Production records or other documentation are accurately completed where required by enterprise procedures |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
This section describes the skills and knowledge required for this unit. |
Required skills |
|
Required knowledge |
|
Evidence Guide
EVIDENCE GUIDE |
|
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. |
|
Overview of assessment |
|
Critical aspects for assessment and evidence required to demonstrate competency in this unit |
Evidence of the following is essential:
|
Context of and specific resources for assessment |
Assessment must ensure:
|
Method of assessment |
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:
|
Guidance information for assessment |
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended. |
Range Statement
RANGE STATEMENT |
|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
|
Substrate handling may include: |
|
Collating units may include: |
|
Fastening units may include: |
|
Equipment may include: |
|
Substrate types may include: |
|
Converting /finishing processes may include: |
|
Complexity may include: |
|
Shapes for die cutting /embossing may include: |
|
Cutting units may include: |
|
Folding units may include: |
|
In -line processes may include: |
|
Unit Sector(s)
Unit sector |
Competency field
Competency field |
Converting, Binding and Finishing |
Co-requisite units
Co-requisite units |
||