Modification History
Not applicable.
Description
Descriptor
This qualification applies to individuals engaged in production coordination in various sectors of the printing and graphic arts industry, who use well-developed skills and a broad knowledge base in a wide variety of contexts. They apply solutions to a defined range of problems, and analyse and evaluate information from a variety of sources. They provide leadership and guidance to others with some limited responsibility for the output of others.
Job Roles
Production coordinator
Production controller
Pathways Information
Qualification Pathways
Entry requirements
There are no entry requirements for this qualification.
Pathways into the qualification
Candidates may enter the qualification with limited or no vocational experience and without a relevant lower level qualification. However, the preferred pathway for candidates entering this qualification is one of the following qualifications:
- ICP30510 Certificate III in Printing and Graphic Arts (Printing)
- ICP30610 Certificate III in Printing and Graphic Arts (Screen Printing)
- ICP30710 Certificate III in Printing and Graphic Arts (Print Finishing)
- ICP30810 Certificate III in Printing and Graphic Arts (Sacks and Bags)
- ICP30910 Certificate III in Printing and Graphic Arts (Cartons and Corrugating)
- ICP31010 Certificate III in Printing and Graphic Arts (Mail House)
- ICP31110 Certificate III in Printing and Graphic Arts (Ink Manufacture).
Pathways from the qualification
At the completion of this qualification candidates could choose to enter a:
- ICP50510 Diploma of Printing and Graphic Arts (Process Improvement).
Licensing/Regulatory Information
Licensing , legislative , regulatory or certification considerations
There is no direct link between this qualification and licensing, legislative and/or regulatory requirements. However, where required, a unit of competency will specify relevant licensing, legislative and/or regulatory requirements that impact on the unit.
Prerequisite Units
Code and title |
Prerequisite units required |
ICPSU458C Monitor production workflow |
ICPSU216C Inspect quality against required standards |
Entry Requirements
Not applicable.
Employability Skills Summary
EMPLOYABILITY SKILLS QUALIFICATION SUMMARY |
|
ICP40710 Certificate IV in Printing and Graphic Arts (Process Leadership ) |
|
The following table contains a summary of the Employability Skills required for this qualification. The Employability Skills facets described here are broad industry requirements that may vary depending on qualification packaging options. |
|
Employability Skill |
Industry /enterprise requirements for this qualification include : |
Communication |
|
Teamwork |
|
Problem solving |
|
Initiative and enterprise |
|
Planning and organising |
|
Self-management |
|
Learning |
|
Technology |
|
Packaging Rules
Packaging Rules |
Total number of units = 19 units 4 core units , plus 4 elective units from Group A , plus 11 elective units from Group B or Group C . Up to 2 elective units from Group A can be substituted with Group C elective units listed below. 2 elective units only must be selected from Group B elective units. The remaining elective units must be taken from Group C elective units. Up to 3 elective units may be selected from the remaining elective units, or from other qualifications, at the same qualification level or one level higher, in this Training Package or any other endorsed Training Package or accredited course. Elective units must be relevant to the qualification level, job role, work outcome and industry requirements. Unit selection is by negotiation and mutual agreement between the employee, employer and the RTO and is based on enterprise and individual needs. |
Core Units |
BSBSUS301A Implement and monitor environmentally sustainable work practices ICPSU216C Inspect quality against required standards ICPSU260C Maintain a safe work environment ICPSU262C Communicate in the workplace |
Group A Elective Units |
ICPSU455C Supervise and schedule work of others ICPSU458C Monitor production workflow ICPSU482C Troubleshoot and optimise materials and machinery ICPSU487C Analyse manual handling processes ICPPP484C Set up and operate automated workflow |
Group B Elective Units |
ICPKN311C Apply knowledge of the graphic pre-press sector ICPKN312C Apply knowledge of printing machining ICPKN313C Apply knowledge and requirements of the converting, binding and finishing sector ICPKN314C Apply knowledge and requirements of the screen printing sector ICPKN315C Apply knowledge and requirements of the multimedia sector ICPKN316C Apply knowledge and requirements of paper and printing processes ICPKN317C Apply knowledge and requirements of the ink manufacturing sector ICPKN318C Apply knowledge and requirements of mail house operations ICPKN319C Apply knowledge and processes of converting paper-based products ICPKN320C Apply knowledge and requirements of information technology systems in the printing industry |
Group C Elective Units |
BSBCUS401A Coordinate implementation of customer service strategies BSBMGT402A Implement operational plan BSBMGT403A Implement continuous improvement BSBWOR402A Promote team effectiveness BSBWOR404A Develop work priorities ICPCF391C Use electronic monitoring systems (converting and finishing) ICPPP430C Manage colour ICPPR491C Use on-press monitoring of print quality ICPPR492C Use on-press print control devices ICPPR493C Set up and monitor in-line printing operations ICPSU345C Purchase materials and schedule deliveries ICPSU351C Undertake basic production scheduling ICPSU389C Undertake basic root cause analysis ICPSU456C Control production ICPSU464C Provide customer service and education ICPSU485C Implement a just-in-time (JIT) system ICPSU486C Mistake proof a production process ICPSU488C Ensure process improvements are sustained MSACMC410A Lead change in a manufacturing environment MSACMT440A Lead 5S in a manufacturing environment MSAENV472A Implement and monitor environmentally sustainable work practices MSAPMSUP390A Use structured problem solving tools TAAASS402C Assess competence TAADEL301C Provide training through instruction and demonstration of work skills TAADEL404B Facilitate work-based learning |