Modification History
|
Release |
Comments |
|
Release 2 |
This version was released with ICP Printing and Graphic Arts Training Package Version 3.0. Updates to elective unit list. |
|
Release 1 |
This qualification first released with ICP Printing and Graphic Arts Training Package Version 2.0. |
Qualification Description
This qualification applies to individuals working in the print manufacturing area creating printed products by hand or machine. They are responsible for post-press and finishing stages of the print process and apply solutions to a defined range of unpredictable problems. They may provide leadership and guidance to others with some limited responsibility for the output of others.
Licensing/Regulatory Information
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
Entry Requirements
Nil
Packaging Rules
Total number of units = 21
4 core units plus
17 elective units of which:
- 8 elective units must be from Group A
- 4 elective units must be from Group B
- 3 elective units must be from Groups A, B and or C
- the remaining 2 elective units may be selected from any currently endorsed training package or accredited course at Certificate III or IV level.
This qualification can provide for specialisations in particular areas of print manufacturing. Elective units that support the particular specialisation must be selected from Group B. Refer to the Companion Volume Implementation Guide for specific advice about choosing electives to support specialisations.
Elective units must be relevant to the work environment and the qualification, maintain the integrity of the AQF alignment and contribute to a valid, industry-supported vocational outcome.
Core units
BSBSUS201 Participate in environmentally sustainable work practices
ICPSUP216 Inspect quality against required standards
ICPSUP260 Maintain a safe work environment
ICPSUP262 Communicate in the workplace
Elective units
Group A
ICPCBF220 Produce basic converted or finished product
ICPCBF221 Set up and produce basic guillotine product
ICPCBF225 Set up machine for basic flat-bed die cutting or embossing
ICPCBF226 Produce basic flat-bed die cut or embossed product
ICPCBF231 Set up machine for basic flat-bed cutting
ICPCBF232 Produce basic flat-bed cut product
ICPCBF241 Set up machine for basic single or continuous folding
ICPCBF242 Produce basic single or continuous folded product
ICPCBF243 Set up machine for basic collating or inserting (sheet/section)
ICPCBF244 Produce basic collated (sheet/section) product
ICPCBF261 Set up machine for basic adhesive, mechanical or thermal fastening
ICPCBF281 Set up machine for basic laminating
ICPCBF282 Produce basic laminated product
ICPCBF298 Run and monitor sack and bag machines
ICPCBF306 Set up machine for basic carton folding and gluing
ICPINK211 Select and prepare materials for production
ICPINK221 Blend chemicals
ICPINK331 Manufacture inks and coatings
ICPKNW322 Develop knowledge of the printing and graphic arts industry
ICPPRN261 Set up for foil stamping
ICPPRN262 Produce foil stamped product
ICPPRN271 Set up for basic coating
ICPPRN272 Produce basic coated product
ICPPRN282 Produce and manage basic digital print
ICPPRN288 Produce basic relief printed product
ICPPRN313 Set up for basic flexographic printing
ICPPRN384 Set up and produce basic digital print
ICPPRN393 Set up for basic relief printing
ICPPRP281 Design basic carton
ICPPRP430 Manage colour
ICPPTD301 Manipulate 3D files in preparation for 3D printing
ICPPTD302 Set up and produce 3D prints
ICPPTD303 Set up and produce 3D scans
ICPPTD304 Apply problem solving techniques to 3D printing maintenance and operation
ICPSUP203 Prepare and maintain the work area
ICPSUP211 Prepare ink and additives
ICPSUP212 Prepare coatings and adhesives
ICPSUP351 Undertake basic production scheduling
ICPSUP352 Plan operational processes
ICPSUP357 Apply quick changeover procedures
TLIA2041A Manually sort mail and parcels
Group B
ICPCBF294 Set up profile cutting for envelope manufacture
ICPCBF300* Run and monitor in-line tube making machine for sack or bag manufacture
ICPCBF303 Run and monitor envelope manufacturing machines
ICPCBF305 Produce single-faced web
ICPCBF307 Produce double-faced web
ICPCBF309 Produce complex folded and glued cartons
ICPCBF311 Prepare for cutting forme and stripper making
ICPCBF312 Set cutting forme and strippers
ICPCBF320 Produce complex converted or finished product
ICPCBF321 Set up and produce complex guillotined product
ICPCBF326 Undertake pre make-ready for die cutting
ICPCBF327 Set up machine for complex rotary die cutting or embossing
ICPCBF328 Produce complex rotary die cut or embossed product
ICPCBF341 Set up machine for complex sequenced or multiple folding
ICPCBF342 Produce complex sequenced or multiple folded product
ICPCBF343 Set up machine for complex collating or inserting (sheet/section/reel)
ICPCBF344 Produce complex collated or inserted product
ICPCBF361 Set up machine for complex adhesive, mechanical or sewn fastening
ICPCBF362 Produce complex adhesive, mechanical or sewn fastened product
ICPCBF369 Set up and produce hand-made box
ICPCBF371 Decorate paper
ICPCBF381 Set up machine for complex laminating
ICPCBF382 Produce complex laminated product
ICPCBF391 Use electronic monitoring systems (converting and finishing)
ICPCBF392 Produce product on window gluer
ICPCBF393 Set up machine for envelope manufacture
ICPCBF395 Set up and operate folder gluer machine
ICPCBF396 Set up in-line scoring, folding and gluing machine for envelope manufacture
ICPCBF398* Set up in-line bottom making machine for sack or bag manufacture
ICPCBF406 Set up and load in-line smart card machine
ICPCBF407 Operate a smart card machine and pack product
ICPCBF410 Set up machine for complex carton folding and gluing
ICPCBF426 Produce complex flat-bed die cut or embossed product
ICPCBF465 Set up and produce hand-bound book
ICPPRN314 Produce complex flexographic printed product
ICPPRN382 Produce and manage complex digital print
ICPPRN383 Prepare for personalised digital printing
ICPPRN484 Prepare for variable data printing
ICPPRN493 Set up and monitor in-line printing operations
ICPPRP322 Digitise images for reproduction
ICPPRP385 Operate a database for digital printing
ICPPRP481 Design complex carton
ICPSUP201 Prepare, load and unload reels and cores on and off machine OR
ICPSUP202 Prepare, load and unload product on and off machine
Group C
BSBFLM309 Support continuous improvement systems and processes
BSBINN201 Contribute to workplace innovation
BSBWOR301 Organise personal work priorities and development
ICPSUP207 Prepare machine for operation (basic)
ICPSUP208 Operate and monitor machines (basic)
ICPSUP221 Pack and dispatch product
ICPSUP222 Pack and dispatch solid waste
ICPSUP235 Lift loads mechanically
ICPSUP236 Shift loads mechanically
ICPSUP241 Undertake warehouse or stores materials processing
ICPSUP243 Reconcile process outputs
ICPSUP263 Perform basic industry calculations
ICPSUP271 Provide basic instruction for a task
ICPSUP281 Use computer systems
ICPSUP282 Undertake basic machine maintenance
ICPSUP311* Prepare ink and additives (advanced)
ICPSUP321 Pack and dispatch (advanced)
ICPSUP323 Dispose of waste
ICPSUP342 Undertake inventory procedures
ICPSUP345 Purchase materials and schedule deliveries
ICPSUP362 Communicate as part of a work team
ICPSUP381 Operate and maintain computer resources
ICPSUP417 Perform laboratory quality tests of materials and finished product
ICPSUP456 Control production
ICPSUP487 Analyse manual handling processes
ICPSUP488 Ensure process improvements are sustained
ICPSUP554 Manage teams
ICTWEB429 Create a markup language document to specification
MSAENV272B Participate in environmentally sustainable work practices
MSAPMSUP390A Use structured problem solving tools
MSL933001A Maintain the laboratory/field workplace fit for purpose
MSL954001A Obtain representative samples in accordance with sampling plan
MSL973001A Perform basic tests
MSL973002A Prepare working solutions
MSL974001A Prepare, standardise and use solutions
MSS402001A Apply competitive systems and practices
MSS402002A Sustain process improvements
MSS402010A Manage the impact of change on own work
MSS402030A Apply cost factors to work practices
MSS402040A Apply 5S procedures
MSS402080A Undertake root cause analysis
* Note the following prerequisite unit requirements:
|
Unit in this qualification |
Prerequisite unit |
|
ICPCBF300 Run and monitor in-line tube making machine for sack or bag manufacture |
ICPCBF298 Run and monitor sack and bag machines |
|
ICPCBF398 Set up in-line bottom making machine for sack or bag manufacture |
ICPCBF298 Run and monitor sack and bag machines |
|
ICPSUP311 Prepare ink and additives (advanced) |
ICPSUP211 Prepare ink and additives |
Qualification Mapping Information
|
Code and title current version |
Code and title previous version |
Comments |
Equivalence status |
|
ICP31315 Certificate III in Print Manufacturing (Release 2) |
ICP31315 Certificate III in Print Manufacturing (Release 1) |
Updates to unit codes and additions to elective unit list |
Equivalent qualification |
Links
Companion Volume Implementation Guides are available from VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=a74b7a0f-a253-47e3-8be0-5d426e24131d
