Modification History
Not applicable.
Description
Descriptor
This qualification applies to individuals engaged in the paper converting area of the printing industry, specific to cartons and corrugating. They prepare materials and set up and run a range of equipment and machinery for cutting, embossing, folding, collating and fastening to produce the finished product. They may also provide leadership and guidance to others with some limited responsibility for the output of others.
Job Roles
Skilled hand
Machinist
Pathways Information
Qualification Pathways
Entry requirements
There are no entry requirements for this qualification.
Pathways into the qualification
Candidates may enter the qualification with limited or no vocational experience and without a relevant lower level qualification. However, the preferred pathway for candidates entering this qualification is one of the following qualifications:
- ICP20110 Certificate II in Printing and Graphic Arts (General)
- ICP20810 Certificate II in Printing and Graphic Arts (Cartons)
- ICP20910 Certificate II in Printing and Graphic Arts (Corrugating).
Pathways from the qualification
At the completion of this qualification students could choose to enter a:
- ICP40710 Certificate IV in Printing and Graphic Arts (Process Leadership).
Licensing/Regulatory Information
Licensing , legislative , regulatory or certification considerations
There is no direct link between this qualification and licensing, legislative and/or regulatory requirements. However, where required, a unit of competency will specify relevant licensing, legislative and/or regulatory requirements that impact on the unit.
Entry Requirements
Not applicable.
Employability Skills Summary
EMPLOYABILITY SKILLS QUALIFICATION SUMMARY |
|
ICP30910 Certificate III in Printing and Graphic Arts (Cartons and Corrugating ) |
|
The following table contains a summary of the Employability Skills required for this qualification. The Employability Skills facets described here are broad industry requirements that may vary depending on qualification packaging options. |
|
Employability Skill |
Industry /enterprise requirements for this qualification include : |
Communication |
|
Teamwork |
|
Problem solving |
|
Initiative and enterprise |
|
Planning and organising |
|
Self-management |
|
Learning |
|
Technology |
|
Packaging Rules
Packaging Rules |
Total number of units = 19 units 4 core units , plus 7 elective units from Group A , plus 8 elective units from Group B or Group C . Up to 2 elective units from Group A can be substituted with Group B elective units listed below. Up to 4 elective units must be selected from Group B. The remaining elective units may be selected from Group B or Group C elective units. Up to 4 elective units may be selected from the remaining elective units or from qualifications at the same qualification level or one level higher, in this Training Package or any other endorsed Training Package or accredited course. Elective units must be relevant to the qualification level, job role, work outcome and industry requirements. Unit selection is by negotiation and mutual agreement between the employee, employer and the RTO and is based on enterprise and individual needs. |
Core Units |
BSBSUS301A Implement and monitor environmentally sustainable work practices ICPSU216C Inspect quality against required standards ICPSU260C Maintain a safe work environment ICPSU262C Communicate in the workplace |
Group A Elective Units |
ICPCF220C Produce basic converted or finished product ICPCF3106C Set up machine for basic carton folding and gluing ICPKN319C Apply knowledge and processes of converting paper-based products ICPSU201C Prepare, load and unload reels and cores on and off machine* OR ICPSU202C Prepare, load and unload product on and off machine* ICPSU203C Prepare and maintain the work area ICPSU224C Perform basic machine maintenance ICPSU281C Use computer systems ICPSU323C Dispose of waste * Both of these units can selected in this qualification, if the enterprise requires both. |
Group B Elective Units |
ICPCF341C Set up machine for complex sequenced or multiple folding ICPCF361C Set up machine for complex adhesive, mechanical or sewn fastening ICPCF392C Produce product on window gluer ICPPP322C Digitise images for reproduction ICPPP481C Design complex carton ICPPR313C Set up for basic flexographic printing ICPPR314C Produce basic flexographic printed product ICPSU342C Undertake inventory procedures ICPSU345C Purchase materials and schedule deliveries ICPSU351C Undertake basic production scheduling ICPSU362C Communicate as part of a work team ICPSU381C Operate and maintain computer resources ICPPR493C Set up and monitor in-line printing operations |
Group C Elective Units |
ICPPP281C Design basic carton ICPCF321C Set up and produce complex guillotined product OR ICPCF326C Undertake pre make-ready for die cutting OR ICPCF225C Set up machine for complex flat-bed die cutting or embossing ICPCF426C Produce complex flat-bed die cut or embossed product OR ICPCF327C Set up machine for complex rotary die cutting or embossing ICPCF328C Produce complex rotary die cut or embossed product OR ICPCF3109C Produce complex folded and glued cartons ICPCF410C Set up machine for complex carton folding and gluing OR ICPCF320C Produce complex converted or finished product ICPCF342C Produce complex sequenced or multiple folded product OR ICPCF362C Produce complex adhesive, mechanical or sewn fastened product MSACMC210A Manage the impact of change on own work MSACMS200A Apply competitive manufacturing practices MSACMS201A Sustain process improvements MSACMT230A Apply cost factors to work practices MSACMT240A Apply 5S procedures in a manufacturing environment MSACMT280A Undertake root cause analysis MSAENV272A Participate in environmentally sustainable work practices |