Modification History
|
Release |
Comments |
|
Release 1 |
This qualification first released with ICP Printing and Graphic Arts Training Package Version 1.0. |
Qualification Description
This qualification applies to skilled operators who work as sacks and bags machinists. They prepare material, monitor and run a range of sack and bag equipment and apply solutions to a defined range of unpredictable problems. They may also provide leadership and guidance to others with some limited responsibility for the output of others.
Licensing/Regulatory Information
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
Entry Requirements
Nil
Packaging Rules
Total number of units = 19 units
4 core units, plus
15 elective units of which:
- 3 elective units must be from Group A
- 2 elective units must be from Group A or B
- 6 elective units must be from Group B
- the remaining 4 elective units may be selected from the remaining elective units, from other qualifications in this Training Package or any other endorsed Training Package, or from an accredited course at Certificate III or IV level.
Elective units must be relevant to the work environment and the qualification, maintain the integrity of the AQF alignment and contribute to a valid, industry-supported vocational outcome.
Core Units
BSBSUS201 Participate in environmentally sustainable work practices
ICPSUP216 Inspect quality against required standards
ICPSUP260 Maintain a safe work environment
ICPSUP262 Communicate in the workplace
Elective Units
Group A
BSBWOR301 Organise personal work priorities and development
ICPKNW319 Apply knowledge and processes of converting paper-based products
ICPCBF298 Run and monitor sack and bag machines
ICPSUP201 Prepare, load and unload reels and cores on and off machine* OR
ICPSUP202 Prepare, load and unload product on and off machine*
ICPSUP203 Prepare and maintain the work area
ICPSUP282 Undertake basic machine maintenance
ICPSUP323 Dispose of waste
Group B
BSBINN201 Contribute to workplace innovation
BSBFLM309 Support continuous improvement systems and processes
ICPCBF221 Set up and produce basic guillotined product
ICPCBF241 Set up machine for basic single or continuous folding
ICPCBF261 Set up machine for basic adhesive, mechanical or thermal fastening
ICPCBF281 Set up machine for basic laminating
ICPCBF298 Run and monitor sack and bag machines
ICPCBF300* Run and monitor in-line tube making machine for sack or bag manufacture
ICPCBF398* Set up in-line bottom making machine for sack or bag manufacture
ICPPRN313 Set up for basic flexographic printing
ICPSUP211 Prepare ink and additives
ICPSUP221 Pack and dispatch product
ICPSUP241 Undertake warehouse or stores materials processing
ICPSUP263 Perform basic industry calculations
ICPSUP342 Undertake inventory procedures
ICPSUP351 Undertake basic production scheduling
ICPSUP352 Plan operational processes
ICPSUP362 Communicate as part of a work team
ICPSUP456 Control production
MSS402010A Manage the impact of change on own work
MSS402001A Apply competitive systems and practices
MSS402002A Sustain process improvements
MSS402030A Apply cost factors to work practices
MSS402040A Apply 5S procedures
MSS402080A Undertake root cause analysis
MSAPMSUP390A Use structured problem solving tools
*Note the following prerequisite unit requirements:
|
Unit in this qualification |
Prerequisite unit |
|
ICPCBF300 Run and monitor in-line tube making machine for sack or bag manufacture |
ICPCBF298 Run and monitor sack and bag machines |
|
ICPCBF398 Set up in-line bottom making machine for sack or bag manufacture |
ICPCBF298 Run and monitor sack and bag machines |
Qualification Mapping Information
|
Code and title current version |
Code and title previous version |
Comments |
Equivalence status |
|
ICP30815 Certificate III in Printing and Graphic Arts (Sacks and Bags) |
ICP30812 Certificate III in Printing and Graphic Arts (Sacks and Bags) |
Updated to meet Standards for Training Packages |
Equivalent qualification |
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=a74b7a0f-a253-47e3-8be0-5d426e24131d
