Modification History
Not applicable.
Description
Descriptor
This qualification applies to skilled operators who work in the sacks and bags area in the printing industry. They prepare material, monitor and run a range of sack and bag equipment and apply solutions to a defined range of unpredictable problems. They may also provide leadership and guidance to others with some limited responsibility for the output of others.
Job Roles
Sack/bag machinist
Pathways Information
Qualification Pathways
Entry requirements
There are no entry requirements for this qualification.
Pathways into the qualification
Candidates may enter the qualification with limited or no vocational experience and without a relevant lower level qualification. However, the preferred pathway for candidates entering this qualification is one of the following qualifications:
- ICP20110 Certificate II in Printing and Graphic Arts (General)
- ICP20710 Certificate II in Printing and Graphic Arts (Sacks and Bags).
Pathways from the qualification
At the completion of this qualification candidates could choose to enter a:
- ICP40710 Certificate IV in Printing and Graphic Arts (Process Leadership).
Licensing/Regulatory Information
Licensing , legislative , regulatory or certification considerations
There is no direct link between this qualification and licensing, legislative and/or regulatory requirements. However, where required, a unit of competency will specify relevant licensing, legislative and/or regulatory requirements that impact on the unit.
Prerequisite Units
Code and title |
Prerequisite units required |
ICPCF3100C Run and monitor in-line tube making machine for sack or bag manufacture |
ICPCF298C Run and monitor sack and bag machines |
ICPCF398C Set up in-line bottom making machine for sack or bag manufacture |
ICPCF298C Run and monitor sack and bag machines |
Entry Requirements
Not applicable.
Employability Skills Summary
EMPLOYABILITY SKILLS QUALIFICATION SUMMARY |
|
ICP30810 Certificate III in Printing and Graphic Arts (Sacks and Bags ) |
|
The following table contains a summary of the Employability Skills required for this qualification. The Employability Skills facets described here are broad industry requirements that may vary depending on qualification packaging options. |
|
Employability Skill |
Industry /enterprise requirements for this qualification include : |
Communication |
|
Teamwork |
|
Problem solving |
|
Initiative and enterprise |
|
Planning and organising |
|
Self-management |
|
Learning |
|
Technology |
|
Packaging Rules
Packaging Rules |
Total number of units = 19 units 4 core units , plus 5 elective units from Group A , plus 10 elective units from Group B . Up to 2 elective units from Group A can be substituted with Group B elective units listed below. 6 elective units must be selected from the Group B elective units listed below. Up to 4 Group B elective units may be selected from the remaining elective units or from qualifications at the same qualification level or one level higher, in this Training Package or any other endorsed Training Package or accredited course. Elective units must be relevant to the qualification level, job role, work outcome and industry requirements. Unit selection is by negotiation and mutual agreement between the employee, employer and the RTO and is based on enterprise and individual needs. |
Core Units |
BSBSUS301A Implement and monitor environmentally sustainable work practices ICPSU216C Inspect quality against required standards ICPSU260C Maintain a safe work environment ICPSU262C Communicate in the workplace |
Group A Elective Units |
BSBWOR301A Organise personal work priorities and development ICPKN319C Apply knowledge and processes of converting paper-based products ICPCF298C Run and monitor sack and bag machines ICPSU201C Prepare, load and unload reels and cores on and off machine* OR ICPSU202C Prepare, load and unload product on and off machine* ICPSU203C Prepare and maintain the work area ICPSU225C Perform small machine maintenance ICPSU224C Perform basic machine maintenance ICPSU323C Dispose of waste * Both of these units can be selected in this qualification, if the enterprise requires both. |
Group B Elective Units |
BSBINN201A Contribute to workplace innovation BSBFLM309C Support continuous improvement systems and processes ICPCF221C Set up and produce basic guillotined product ICPCF241C Set up machine for basic single or continuous folding ICPCF261C Set up machine for basic adhesive, mechanical or thermal fastening ICPCF281C Set up machine for basic laminating ICPCF298C Run and monitor sack and bag machines ICPCF3100C Run and monitor in-line tube making machine for sack or bag manufacture ICPCF398C Set up in-line bottom making machine for sack or bag manufacture ICPPR213C Set up for basic flexographic printing ICPSU211C Prepare ink and additives ICPSU221C Pack and dispatch product ICPSU241C Undertake warehouse or stores materials processing ICPSU263C Perform basic industry calculations ICPSU342C Undertake inventory procedures ICPSU351C Undertake basic production scheduling ICPSU352C Plan operational processes ICPSU362C Communicate as part of a work team ICPSU456C Control production MSACMC210A Manage the impact of change on own work MSACMS200A Apply competitive manufacturing practices MSACMS201A Sustain process improvements MSACMT230A Apply cost factors to work practices MSACMT240A Apply 5S procedures in a manufacturing environment MSACMT280A Undertake root cause analysis MSAPMSUP390A Use structured problem solving tools |