Modification History
Not applicable.
Description
Descriptor
This qualification applies to individuals who perform a range of mainly routine tasks in the sacks and bags sector of the printing and graphic arts industry. They assist in the preparation of material and operation of sack and bag equipment while working under direct supervision.
Job Roles
Offsider
Sack/bag maker
General operator
Pathways Information
Qualification Pathways
Entry requirements
There are no entry requirements for this qualification.
Pathways into the qualification
Candidates may enter the qualification with limited or no vocational experience and without a relevant lower level qualification.
Pathways from the qualification
At the completion of this qualification candidates could choose to enter a:
- ICP30710 Certificate III in Printing and Graphic Arts (Print Finishing)
- ICP30810 Certificate III in Printing and Graphic Arts (Sacks and Bags).
Licensing/Regulatory Information
Licensing , legislative , regulatory or certification considerations
There is no direct link between this qualification and licensing, legislative and/or regulatory requirements. However, where required, a unit of competency will specify relevant licensing, legislative and/or regulatory requirements that impact on the unit.
Prerequisite Units
|
Code and title |
Prerequisite units required |
|
ICPCF3100C Run and monitor in-line tube making machine for sack or bag manufacture |
ICPCF298C Run and monitor sack and bag machines |
|
ICPCF3101C Run and monitor in-line bottom making machine for sack or bag manufacture |
ICPCF298C Run and monitor sack and bag machines |
Entry Requirements
Not applicable.
Employability Skills Summary
|
EMPLOYABILITY SKILLS QUALIFICATION SUMMARY |
|
|
ICP20710 Certificate II in Printing and Graphic Arts (Sacks and Bags ) |
|
|
The following table contains a summary of the Employability Skills required for this qualification. The Employability Skills facets described here are broad industry requirements that may vary depending on qualification packaging options. |
|
|
Employability Skill |
Industry /enterprise requirements for this qualification include : |
|
Communication |
|
|
Teamwork |
|
|
Problem solving |
|
|
Initiative and enterprise |
|
|
Planning and organising |
|
|
Self-management |
|
|
Learning |
|
|
Technology |
|
Packaging Rules
|
Packaging Rules |
|
Total number of units = 15 units 4 core units , plus 2 elective units from Group A , plus 9 elective units from Group B . 2 elective units must be selected from Group A elective units listed below. 6 elective units must be selected from the Group B elective units listed below. Up to 3 Group B elective units may be selected from the remaining elective units or from qualifications at the same level or one level higher, in this Training Package or any other endorsed Training Package or accredited course. Elective units must be relevant to the qualification level, job role, work outcome and industry requirements. Unit selection is by negotiation and mutual agreement between the employee, employer and the RTO and is based on enterprise and individual needs. |
|
Core Units |
|
BSBSUS201A Participate in environmentally sustainable work practices ICPSU216C Inspect quality against required standards ICPSU260C Maintain a safe work environment ICPSU262C Communicate in the workplace |
|
Group A Elective Units |
|
ICPCF297C Clean sack and bag machines ICPSU201C Prepare, load and unload reels and cores on and off machine* OR ICPSU202C Prepare, load and unload product on and off machine* ICPSU203C Prepare and maintain the work area * Both of these units can be selected in this qualification, if the enterprise requires both. |
|
Group B Elective Units |
|
ICPCF242C Produce basic single or continuous folded product ICPCF281C Set up machine for basic laminating ICPCF298C Run and monitor sack and bag machines ICPCF2101C Set up and run machine for sewing ICPCF3100C Run and monitor in-line tube making machine for sack or bag manufacture ICPCF3101C Run and monitor in-line bottom making machine for sack or bag manufacture ICPSU120C Pack product ICPSU207C Prepare machine for operation (basic) ICPSU221C Pack and dispatch product ICPSU225C Perform small machine maintenance ICPSU236C Shift loads mechanically ICPSU261C Follow OHS practices and identify environmental hazards ICPSU280C Enter data into an electronic system ICPSU357C Apply quick changeover procedures ICPSU389C Undertake basic root cause analysis MSACMC210A Manage the impact of change on own work MSACMS200A Apply competitive manufacturing practices MSACMS201A Sustain process improvements MSACMT230A Apply cost factors to work practices MSACMT240A Apply 5S procedures in a manufacturing environment |
