^

 
 

Qualification details

ICP20710 - Certificate II in Printing and Graphic Arts (Sacks and Bags) (Release 1)

Summary

Usage recommendation:
Superseded
Mapping:
MappingNotesDate
Is superseded by and equivalent to ICP20115 - Certificate II in Printing and Graphic Arts (General)Updated to meet Standards for Training Packages 11 qualifications merged into one to allow more flexibility 25/Mar/2015
Supersedes and is equivalent to ICP20705 - Certificate II in Printing and Graphic Arts (Sacks and Bags) 04/Jul/2010

Releases:
ReleaseRelease date
1 1 (this release) 05/Jul/2010

Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnEssentialSort Table listing Units of Competency by the Essential column
ICPSU207C - Prepare machine for operation (basic)Prepare machine for operation (basic)N/A
ICPSU216C - Inspect quality against required standardsInspect quality against required standardsN/A
ICPSU280C - Enter data into electronic systemEnter data into electronic systemN/A
ICPSU357C - Apply quick changeover proceduresApply quick changeover proceduresN/A
ICPSU262C - Communicate in the workplaceCommunicate in the workplaceN/A
ICPSU202C - Prepare, load and unload product on and off machinePrepare, load and unload product on and off machineN/A
ICPCF2101C - Set up and run machine for sewingSet up and run machine for sewingN/A
ICPSU120C - Pack productPack productN/A
ICPCF242C - Produce basic single or continuous folded productProduce basic single or continuous folded productN/A
ICPSU225C - Perform small machine maintenancePerform small machine maintenanceN/A
MSACMT230A - Apply cost factors to work practicesApply cost factors to work practicesN/A
ICPSU201C - Prepare, load and unload reels and cores on and off machinePrepare, load and unload reels and cores on and off machineN/A
BSBSUS201A - Participate in environmentally sustainable work practicesParticipate in environmentally sustainable work practicesN/A
ICPCF298C - Run and monitor sack and bag machinesRun and monitor sack and bag machinesN/A
ICPSU389C - Undertake basic root cause analysisUndertake basic root cause analysisN/A
ICPCF3101C - Run and monitor in-line bottom making machine for sack or bag manufactureRun and monitor in-line bottom making machine for sack or bag manufactureN/A
MSACMC210A - Manage the impact of change on own workManage the impact of change on own workN/A
ICPSU203C - Prepare and maintain the work areaPrepare and maintain the work areaN/A
MSACMS200A - Apply competitive manufacturing practicesApply competitive manufacturing practicesN/A
ICPSU236C - Shift loads mechanicallyShift loads mechanicallyN/A
ICPCF3100C - Run and monitor in-line tube making machine for sack or bag manufactureRun and monitor in-line tube making machine for sack or bag manufactureN/A
ICPSU261C - Follow OHS practices and identify environmental hazardsFollow OHS practices and identify environmental hazardsN/A
ICPSU221C - Pack and dispatch productPack and dispatch productN/A
MSACMT240A - Apply 5S procedures in a manufacturing environmentApply 5S procedures in a manufacturing environmentN/A
ICPSU260C - Maintain a safe work environmentMaintain a safe work environmentN/A
ICPCF281C - Set up machine for basic laminatingSet up machine for basic laminatingN/A
MSACMS201A - Sustain process improvementsSustain process improvementsN/A
ICPCF297C - Clean sack and bag machinesClean sack and bag machinesN/A
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 28 of 28

Classifications

SchemeCodeClassification value
ANZSCO Identifier 899512 Printing Table Worker 
ASCO (occupation type) Identifier 7996-11 Printing Table Hand 
ASCED Qualification/Course Field of Education Identifier 0301 Manufacturing Engineering And Technology 
Qualification/Course Level of Education Identifier 521 Certificate II 
Taxonomy - Industry Sector N/A Paper Products 
Taxonomy - Occupation N/A Sack/Bag Maker 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 899512 Printing Table Worker 05/Jul/2010 
ASCO (occupation type) Identifier 7996-11 Printing Table Hand 05/Jul/2010 
ASCED Qualification/Course Field of Education Identifier 0301 Manufacturing Engineering And Technology 05/Jul/2010 
Qualification/Course Level of Education Identifier 521 Certificate II 05/Jul/2010 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Not applicable.

Description

Descriptor 

This qualification applies to individuals who perform a range of mainly routine tasks in the sacks and bags sector of the printing and graphic arts industry. They assist in the preparation of material and operation of sack and bag equipment while working under direct supervision.

Job Roles 

Offsider

Sack/bag maker

General operator

Pathways Information

Qualification Pathways 

Entry requirements 

There are no entry requirements for this qualification.

Pathways into the qualification 

Candidates may enter the qualification with limited or no vocational experience and without a relevant lower level qualification.

Pathways from the qualification 

At the completion of this qualification candidates could choose to enter a:

  • ICP30710 Certificate III in Printing and Graphic Arts (Print Finishing)
  • ICP30810 Certificate III in Printing and Graphic Arts (Sacks and Bags).

Licensing/Regulatory Information

Licensing , legislative , regulatory or certification considerations 

There is no direct link between this qualification and licensing, legislative and/or regulatory requirements. However, where required, a unit of competency will specify relevant licensing, legislative and/or regulatory requirements that impact on the unit.

Prerequisite Units 

Code and title 

Prerequisite units required 

ICPCF3100C Run and monitor in-line tube making machine for sack or bag manufacture

ICPCF298C Run and monitor sack and bag machines

ICPCF3101C Run and monitor in-line bottom making machine for sack or bag manufacture

ICPCF298C Run and monitor sack and bag machines

Entry Requirements

Not applicable.

Employability Skills Summary

EMPLOYABILITY SKILLS QUALIFICATION SUMMARY 

ICP20710 Certificate II in Printing and Graphic Arts  (Sacks and Bags )

The following table contains a summary of the Employability Skills required for this qualification. The Employability Skills facets described here are broad industry requirements that may vary depending on qualification packaging options.

Employability Skill 

Industry /enterprise requirements for this qualification include :

Communication

  • checking job specifications for details of requirements
  • documenting consumables used when maintaining small machines for reordering purposes
  • labelling packaged goods before shipment

Teamwork

  • operating production processes in association with fellow workers

Problem solving

  • documenting and reporting obvious faults and wear on sack and bag machines
  • taking samples of products, checking the samples against specifications and adjusting machines to bring products into specifications

Initiative and enterprise

  • anticipating production difficulties and taking preventative action
  • recommending improvements to quick changeover procedures

Planning and organising

  • organising tools required to set up and adjust machines for bag manufacture

Self-management

  • following procedures and using personal protective equipment correctly

Learning

  • giving and following simple routine instructions

Technology

  • using computerised control, monitoring and data entry systems
  • using machinery, such as pallet wrapping equipment and sack and bag machines

Packaging Rules

Packaging Rules 

Total number of units  = 15 units 

4 core units , plus

2 elective units from Group A , plus

9 elective units from Group B .

2 elective units  must be selected from Group A elective units listed below.

6 elective units  must be selected from the Group B elective units listed below.

Up to 3 Group B elective units  may be selected from the remaining elective units or from qualifications at the same level or one level higher, in this Training Package or any other endorsed Training Package or accredited course.

Elective units must be relevant to the qualification level, job role, work outcome and industry requirements. Unit selection is by negotiation and mutual agreement between the employee, employer and the RTO and is based on enterprise and individual needs.

Core Units 

BSBSUS201A Participate in environmentally sustainable work practices

ICPSU216C Inspect quality against required standards

ICPSU260C Maintain a safe work environment

ICPSU262C Communicate in the workplace

Group A Elective Units 

ICPCF297C Clean sack and bag machines

ICPSU201C Prepare, load and unload reels and cores on and off machine* OR  ICPSU202C Prepare, load and unload product on and off machine*

ICPSU203C Prepare and maintain the work area

* Both of these units can be selected in this qualification, if the enterprise requires both.

Group B Elective Units 

ICPCF242C Produce basic single or continuous folded product

ICPCF281C Set up machine for basic laminating

ICPCF298C Run and monitor sack and bag machines

ICPCF2101C Set up and run machine for sewing

ICPCF3100C Run and monitor in-line tube making machine for sack or bag manufacture

ICPCF3101C Run and monitor in-line bottom making machine for sack or bag manufacture

ICPSU120C Pack product

ICPSU207C Prepare machine for operation (basic)

ICPSU221C Pack and dispatch product

ICPSU225C Perform small machine maintenance

ICPSU236C Shift loads mechanically

ICPSU261C Follow OHS practices and identify environmental hazards

ICPSU280C Enter data into an electronic system

ICPSU357C Apply quick changeover procedures

ICPSU389C Undertake basic root cause analysis

MSACMC210A Manage the impact of change on own work

MSACMS200A Apply competitive manufacturing practices

MSACMS201A Sustain process improvements

MSACMT230A Apply cost factors to work practices

MSACMT240A Apply 5S procedures in a manufacturing environment