Modification History
Not applicable.
Description
Descriptor
This qualification applies to individuals who perform a range of mainly routine tasks in the converting, binding and finishing sector of the printing and graphic arts industry. They will generally work under direct supervision and use limited practical skills and fundamental operational knowledge in a defined context.
Job Roles
Assistant machinist
Bench hand
Pathways Information
Qualification Pathways
Entry requirements
There are no entry requirements for this qualification.
Pathways into the qualification
Candidates may enter the qualification with limited or no vocational experience and without a relevant lower level qualification.
Pathways from the qualification
At the completion of this qualification candidates could choose to enter a:
- ICP30710 Certificate III in Printing and Graphic Arts (Print Finishing)
- ICP30810 Certificate III in Printing and Graphic Arts (Sacks and Bags).
Licensing/Regulatory Information
Licensing , legislative , regulatory or certification considerations
There is no direct link between this qualification and licensing, legislative and/or regulatory requirements. However, where required, a unit of competency will specify relevant licensing, legislative and/or regulatory requirements that impact on the unit.
Entry Requirements
Not applicable.
Employability Skills Summary
EMPLOYABILITY SKILLS QUALIFICATION SUMMARY |
|
ICP20610 Certificate II in Printing and Graphic Arts (Converting , Binding and Finishing ) |
|
The following table contains a summary of the Employability Skills required for this qualification. The Employability Skills facets described here are broad industry requirements that may vary depending on qualification packaging options. |
|
Employability Skill |
Industry /enterprise requirements for this qualification include : |
Communication |
|
Teamwork |
|
Problem solving |
|
Initiative and enterprise |
|
Planning and organising |
|
Self-management |
|
Learning |
|
Technology |
|
Packaging Rules
Packaging Rules |
Total number of units = 15 units 4 core units , plus 11 elective units . 8 elective units must be selected from the elective units listed below. Up to 3 elective units may be selected from the remaining elective units or from qualifications at the same level or one level higher, in this Training Package or any other endorsed Training Package or accredited course. Elective units must be relevant to the qualification level, job role, work outcome and industry requirements. Unit selection is by negotiation and mutual agreement between the employee, employer and the RTO and is based on enterprise and individual needs. |
Core Units |
BSBSUS201A Participate in environmentally sustainable work practices ICPSU216C Inspect quality against required standards ICPSU260C Maintain a safe work environment ICPSU262C Communicate in the workplace |
Elective Units |
ICPCF220C Produce basic converted or finished product ICPCF221C Set up and produce basic guillotined product ICPCF222C Set up and operate in-line cutter ICPCF223C Set up machine for cutting (trimming) ICPCF224C Produce cut (trimmed) product ICPCF225C Set up machine for basic flat-bed die cutting or embossing ICPCF226C Produce basic flat-bed die cut or embossed product ICPCF227C Set up machine for basic rotary die cutting or embossing ICPCF228C Produce basic rotary die cut or embossed product ICPCF231C Set up machine for basic flat-bed cutting ICPCF232C Produce basic flat-bed cut product ICPCF235C Set up machine for basic rotary cutting ICPCF236C Produce basic rotary cut product ICPCF241C Set up machine for basic single or continuous folding ICPCF242C Produce basic single or continuous folded product ICPCF243C Set up machine for basic collating or inserting (sheet/section) ICPCF244C Produce basic collated or inserted (sheet/section) product ICPCF261C Set up machine for basic adhesive, mechanical or thermal fastening ICPCF262C Produce basic adhesive, mechanical or thermal fastened product ICPCF263C Set up and produce hand-fastened product ICPCF281C Set up machine for basic laminating ICPCF282C Produce basic laminated product ICPCF294C Set up profile cutting for envelope manufacture ICPCF2101C Set up and run machine for sewing ICPSU120C Pack product ICPSU201C Prepare, load and unload reels and cores on and off machine ICPSU202C Prepare, load and unload product on and off machine ICPSU203C Prepare and maintain the work area ICPSU207C Prepare machine for operation (basic) ICPSU208C Operate and monitor machines (basic) ICPSU211C Prepare ink and additives ICPSU212C Prepare coatings, adhesives ICPSU221C Pack and dispatch product ICPSU222C Pack and dispatch solid waste ICPSU224C Perform basic machine maintenance ICPSU225C Perform small machine maintenance ICPSU235C Lift loads mechanically ICPSU236C Shift loads mechanically ICPSU241C Undertake warehouse or stores materials processing ICPSU243C Reconcile process outputs ICPSU261C Follow OHS practices and identify environmental hazards ICPSU263C Perform basic industry calculations ICPSU271C Provide basic instruction for a task ICPSU280C Enter data into electronic system ICPSU281C Use computer systems MSACMC210A Manage the impact of change on own work MSACMS200A Apply competitive manufacturing practices MSACMS201A Sustain process improvements MSACMT230A Apply cost factors to work practices MSACMT240A Apply 5S procedures in a manufacturing environment MSACMT280A Undertake root cause analysis |