Modification History
Not applicable.
Description
Descriptor
This qualification applies to individuals who assist with digital production workflow and operate and monitor digital printing equipment and machinery. They will generally work under direct supervision, and use limited practical skills and fundamental operational knowledge in a defined context.
Job Roles
Digital print operator
Pathways Information
Qualification Pathways
Entry requirements
There are no entry requirements for this qualification.
Pathways into the qualification
Candidates may enter the qualification with limited or no vocational experience and without a relevant lower level qualification.
Pathways from the qualification
At the completion of this qualification candidates could choose to enter a:
- ICP30410 Certificate III in Printing and Graphic Arts (Digital Printing)
- ICP30510 Certificate III in Printing and Graphic Arts (Printing).
Licensing/Regulatory Information
Licensing , legislative , regulatory or certification considerations
There is no direct link between this qualification and licensing, legislative and/or regulatory requirements. However, where required, a unit of competency will specify relevant licensing, legislative and/or regulatory requirements that impact on the unit.
Entry Requirements
Not applicable.
Employability Skills Summary
EMPLOYABILITY SKILLS QUALIFICATION SUMMARY |
|
ICP20310 Certificate II in Printing and Graphic Arts (Digital Printing ) |
|
The following table contains a summary of the Employability Skills required for this qualification. The Employability Skills facets described here are broad industry requirements that may vary depending on qualification packaging options. |
|
Employability Skill |
Industry /enterprise requirements for this qualification include : |
Communication |
|
Teamwork |
|
Problem solving |
|
Initiative and enterprise |
|
Planning and organising |
|
Self-management |
|
Learning |
|
Technology |
|
Packaging Rules
Packaging Rules |
Total number of units = 15 4 core units , plus 4 elective units from Group A , plus 7 elective units from Group B . Up to 2 elective units from Group A can be substituted with Group B elective units listed below. 5 elective units must be selected from the Group B elective units listed below. Up to 2 Group B elective units may be selected from the remaining elective units or from qualifications at the same level or one level higher, in this Training Package or any other endorsed Training Package or accredited course. Elective units must be relevant to the qualification level, job role, work outcome and industry requirements. Unit selection is by negotiation and mutual agreement between the employee, employer and the RTO and is based on enterprise and individual needs. |
Core Units |
BSBSUS201A Participate in environmentally sustainable work practices ICPSU216C Inspect quality against required standards ICPSU260C Maintain a safe work environment ICPSU262C Communicate in the workplace |
Group A Elective Units |
BSBCUS301A Deliver and monitor a service to customers ICPPR384A Set up and produce basic digital print ICPSU203C Prepare and maintain the work area ICPSU263C Perform basic industry calculations ICPSU281C Use computer systems |
Group B Elective Units |
ICPCF221C Set up and produce basic guillotined product ICPCF241C Set up machine for basic single or continuous folding ICPCF242C Produce basic single or continuous folded product ICPCF243C Set up machine for basic collating or inserting (sheet/section) ICPCF244C Produce basic collated or inserted (sheet/section) product ICPCF245C Set up and produce hand collated or inserted product ICPCF261C Set up machine for basic adhesive, mechanical or thermal fastening ICPCF262C Produce basic adhesive mechanical or thermal fastened product ICPCF263C Set up and produce hand-fastened product ICPPP211C Develop a basic design concept ICPPP221C Select and apply type ICPPP224C Produce pages using a page layout application ICPPP252C Output images ICPPP286A Scan images for reproduction ICPPP385C Operate a database for digital printing ICPPP397A Transfer digital files ICPPR282C Produce and manage basic digital print ICPPR283A Use digital media consumables ICPPR284A Introduction to colour management ICPPR285A Use digital workflow ICPPR286A Finish a digital product ICPPR287A Use digital processes ICPSU207C Prepare machine for operation (basic) ICPSU211C Prepare ink and additives ICPSU221C Pack and dispatch product ICPSU225C Perform small machine maintenance ICPSU224C Perform basic machine maintenance ICPSU261C Follow OHS practices and identify environmental hazards MSACMC210A Manage the impact of change on own work MSACMS200A Apply competitive manufacturing practices MSACMS201A Sustain process improvements MSACMT230A Apply cost factors to work practices MSACMT240A Apply 5S procedures in a manufacturing environment MSACMT270A Use sustainable energy practices MSACMT280A Undertake root cause analysis |