Modification History
HLT07 Version 4 |
HLT07 Version 5 |
Comments |
HLTSTE301C Clean reusable medical equipment |
HLTSTE301D - Clean reusable medical equipment |
Unit updated in V5. ISC upgrade changes to remove references to old OHS legislation and replace with references to new WHS legislation. No change to competency outcome. |
Unit Descriptor
Descriptor |
This unit of competency describes the skills and knowledge required to follow the correct procedures for handling reusable medical equipment including, collection of soiled items, identification, inspection, cleaning operation, and the monitoring and maintenance of associated cleaning equipment The range of functions is prescribed around known standards, guidelines, policies and procedures, under the supervision of a qualified person |
Application of the Unit
Application |
The application of knowledge and skills described in this competency unit could take place in a range of health settings, including hospitals and specialist sterilisation facilities. The application of knowledge and skills takes place around standards, guidelines, policies and procedures and under the supervision of a qualified person Functions at this level require a broad overview of microbiology and disinfection in relation to AS/NSZ 4187-2003 |
Licensing/Regulatory Information
Not Applicable
Pre-Requisites
Pre-requisite unit |
This unit must be assessed after successful achievement of pre-requisite:
|
Employability Skills Information
Employability Skills |
This unit contains Employability Skills |
Elements and Performance Criteria Pre-Content
Elements define the essential outcomes of a unit of competency. |
The Performance Criteria specify the level of performance required to demonstrate achievement of the Element. Terms in italics are elaborated in the Range Statement. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1. Follow procedures for safe practice |
1.1 Use cleaning procedures that comply with AS/NZS 4187 and AS/NZS 4815 guidelines, manufacturers recommendations and organisation policies and procedures 1.2 Identify the need for and use standard precautions 1.3 Identify and use appropriate personal protection 1.4 Identify and comply with relevant organisation WHS policies and procedures 1.5 Identify infection risks and implement an appropriate response (or report to designated personnel) in accordance with the policies and procedures of the organisation 1.6 Identify different methods for safe handling of sharp instruments and improperly disposed sharps such as needles, scalpel blades etc. 1.7 Identify the protocol for care following exposure to blood or other body fluids of the organisation 1.8 Manage spills of blood and body fluids in line with organisation policies and procedures |
2. Collect contaminated items and equipment |
2.1 Prepare and stock designated collection equipment eg trolleys, containers, case carts 2.2 Follow the designated route and timetable for collecting contaminated items and equipment 2.3 Confine and contain contaminated items prior to transport 2.4 Comply with transport protocols, ie contaminated goods are not left unattended en route 2.5 Transport used items and equipment to the cleaning area according to cleaning are according to organisation policies and procedures 2.6 Appropriately clean, dry and store collection equipment after each use |
3. Sort and process contaminated items and equipment |
3.1 Identify and sort items in accordance with AS/NZS 4187 and AS/NZS 4815 and organisation policies and procedures 3.2 Prepare and clean items, eg initial and manual mechanical procedures, in accordance with AS/NZS 4187 and AS/NZS 4815 and organisation policies and procedures 3.3 Report disposable sharps and ensure their removal and disposal according to organisation policies and procedures 3.4 Remove and dispose of waste at point of use, and report any variance in accordance with regulatory and policy requirements 3.5 Prepare specialised items for specific cleaning procedures 3.6 Identify and give priority to specific items requiring priority processing 3.7 Segregate and process delicate items in accordance with organisation policies and procedures 3.8 Identify faulty and damaged items and report to designated person 3.9 Lubricate instruments in accordance with AS/NZS 4187 and AS/NZS 4815 and organisation policies and procedures 3.10 Dry items in accordance with AS/NZS 4187and AS/NZS 4815 and organisation policies and procedures |
4. Follow required work flow processes |
4.1 Work flows in one direction only, from dirty to clean 4.2 Designated work areas are segregated and clearly identified 4.3 Perform all tasks in the designated area 4.4 Identify and report interruptions to work flow according to organisation requirements |
5. Load and operate cleaning appliances safely and efficiently |
5.1 Clean and stock cleaning equipment and environment in accordance with manufacturer's recommendations and organisation policies and procedures 5.2 Test, check and prepare all equipment for use in accordance with relevant standards, manufacturers' recommendations and organisation policies and procedures 5.3 Identify, select, store and use chemical products according to manufacturer's instructions and WHS guidelines, with reference to material safety data sheets visible for all chemicals in use 5.4 Use appropriate manual handling techniques when operating cleaning appliances 5.5 Identify faulty/damaged cleaning equipment, including detergent dispensing systems and report to the designated authority for repair 5.6 Check processed items for cleanliness, dryness and need for reprocessing if necessary |
6. Follow procedures for monitoring the efficiency of cleaning |
6.1 Complete monitoring and/or test procedures, eg water quality, detergent residue, chemical, soil removal efficacy, in accordance with standards and organisation policies and procedures 6.2 Ensure processes take into account opportunities to address waste minimisation, environmental responsibility and sustainable practice issues 6.3 Monitor and document physical parameter, eg time, temperature, concentration in accordance with standards and organisation policies and procedures 6.4 Interpret and report any variance of procedures and physical parameter to the designated person 6.5 Complete and archive quality management documentation in accordance with standards and organisation policies and procedures |
Required Skills and Knowledge
This describes the essential skills and knowledge and their level required for this unit. |
Essential knowledge: The candidate must be able to demonstrate essential knowledge required to effectively do the task outlined in elements and performance criteria of this unit, manage the task and manage contingencies in the context of the identified work role This includes knowledge of:
|
Essential skills: It is critical that the candidate demonstrate the ability to:
In addition, the candidate must be able to effectively do the task outlined in elements and performance criteria of this unit, manage the task and manage contingencies in the context of the identified work role This includes the ability to:
|
Evidence Guide
EVIDENCE GUIDE |
|
The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package. |
|
Critical aspects for assessment and evidence required to demonstrate this competency unit: |
|
Context of and specific resources for assessment: |
|
Method of assessment |
|
Access and equity considerations: |
|
Range Statement
RANGE STATEMENT |
|
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts. |
|
Cleaning equipment may include: |
|
Personal protective equipment may include: |
|
Reusable medical equipment may include: |
|
Cleaning procedures may involve the use of specific chemicals such as: |
|
Separate processing requirements apply to: |
|
Cleaning may involve: |
|
Unit Sector(s)
Not Applicable