The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form
Unit of competency
Modification History
Release
|
Comments
|
Release 1
|
This version was released in HLT Health Training Package release 3.0 and meets the requirements of the 2012 Standards for Training Packages.
Minimal changes to the elements and performance criteria. New evidence requirements for assessment including volume and frequency requirements. Removal of pre-requisites
Supersedes HLTDT303D
|
Application
This unit of competency describes the skills and knowledge required to design and manufacture registration rims for removable prostheses.
This unit applies to work in dental technology.
The skills in this unit must be applied in accordance with Commonwealth and State/Territory legislation, Australian/New Zealand Standards and industry codes of practice.
Elements and Performance Criteria
ELEMENT
|
PERFORMANCE CRITERIA
|
Elements define the essential outcomes
|
Performance criteria describe the performance needed to demonstrate achievement of the element.
|
1. Select and prepare materials
|
1.1 Read and interpret the work order
1.2 Select appropriate material for the base
1.3 Select appropriate material for the rim
1.4 Prepare model to enable appropriate application of selected base material
|
2. Construct base
|
2.1 Apply selected base material to model
2.2 Process base material according to type of material selected
2.3 Trim base material to peripheral contours of model and appropriate landmarks
|
3. Construct registration rim
|
3.1 Construct rim to industry standard in selected material
3.2 Trim rim to prescribed dimensions and appropriate landmarks
3.3 Smooth and polish rim according to material chosen
3.4 Decontaminate the registration rim according to infection control guidelines
3.5 Dry the registration rim and place in a sealed container for dispatch
|
Foundation Skills
The Foundation Skills describe those required skills (language, literacy, numeracy and employment skills) that are essential to performance.
|
Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.
|
Unit Mapping Information
No Equivalent Unit
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=ced1390f-48d9-4ab0-bd50-b015e5485705
Assessment requirements
Modification History
Release
|
Comments
|
Release 1
|
This version was released in HLT Health Training Package release 3.0 and meets the requirements of the 2012 Standards for Training Packages.
Minimal changes to the elements and performance criteria. New evidence requirements for assessment including volume and frequency requirements. Removal of pre-requisites
Supersedes HLTDT303D
|
Performance Evidence
The candidate must show evidence of the ability to complete tasks outlined in elements and performance criteria of this unit, manage tasks and manage contingencies in the context of the job role. There must be evidence that the candidate has:
• read and correctly interpreted 4 work orders
• used standard precautions and safe work practices to fabricate maxillary and mandibular registration rims using a range of flexible and rigid base and rim material for the following dentitions (4 rims in total):
- partial with a combination of bounded and unbounded saddle areas
- edentulous
• critically evaluated the 4 registration rims produced to meet technical laboratory and clinician requirements.
Knowledge Evidence
The candidate must be able to demonstrate essential knowledge required to effectively complete tasks outlined in elements and performance criteria of this unit, manage tasks and manage contingencies in the context of the work role. This includes knowledge of:
• Australian/New Zealand Standards, workplace health and safety (WHS) policies, Dental Board of Australia guidelines on infection control, Commonwealth and State/Territory legislation and organisation policies relating to dental laboratory work
• fundamental oral anatomy including:
- dentition – arrangement of the teeth, naming and coding of teeth
- structures of the oral cavity – hard and soft palate, lateral and posterior borders of the oral cavity, tongue and floor of the mouth
- teeth form and function
• properties of materials used to construct registration rims, including rigid and flexible bases.
Assessment Conditions
Skills must have been demonstrated in a dental laboratory workplace or in a simulated dental laboratory environment that reflects workplace laboratory conditions. The following conditions must be met for this unit:
• use of suitable facilities, equipment and resources including:
- access to work order
- Dental Board of Australia guidelines on infection control on which the candidate bases the planning process
- laboratory safety manuals and procedures in line with relevant Commonwealth and State/Territory legislation
- materials for construction of rims
- WHS policies on which the candidate bases the planning process.
Assessors must satisfy the Standards for Registered Training Organisations (RTOs) 2015/AQTF mandatory competency requirements for assessors.
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=ced1390f-48d9-4ab0-bd50-b015e5485705