Unit of competency details
FWPTMM4206 - Prepare and advise on a broad range of timber floor system details using computers (Release 1)
Summary
Usage recommendation:
Superseded
Releases:
| 1 1 (this release) |
13/May/2016 |
Companion volumes:
Unit of competency
Assessment requirements
Training packages that include this unit
Qualifications that include this unit
Classifications
Classification history
| ASCED Module/Unit of Competency Field of Education Identifier | 040301 | Building Science And Technology | 14/Oct/2016 | |
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form
Unit of competency
Modification History
|
Release
|
Comment
|
|
1
|
Replaces equivalent unit FPITMM4206A Prepare and advise on a broad range of timber floor system details using computers, which was first released with FPI11 Forest and Forest Products Training Package Version 2.2.
This is the first release of this unit in the new standards format.
|
Application
This unit of competency describes the outcomes required to prepare and advise on a broad range of timber floor system drawings, production documents and installation instructions using custom software. Work is completed in a timber production or design setting.
The unit applies to Customer Service / Sales Assistant (Retail or Wholesale), Customer Service Officer, Sales and Merchandising Team Leader, Sales and Merchandising Team Leader (Timber Products), Timber Advisor.
No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Pre-requisite Unit
Nil
Unit Sector
Timber Manufactured Products
Elements and Performance Criteria
|
Elements describe the essential outcomes.
|
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.
|
|
1. Interpret plans or designs and create layouts
|
1.1 Identify and verify design inputs.
1.2 Check computer software for currency and use to prepare floor system layouts and production documentation.
1.3 Resolve design requirements outside software limitations.
|
|
2. Review and test design options
|
2.1 Review and test floor system layouts for optimal suitability for stakeholders.
2.2 Use effective processes to optimise floor system layout and ensure stakeholder objectives are met.
|
|
3. Provide advice on design, production and installation issues
|
3.1 Prepare and document production and installation advice.
3.2 Communicate documented advice to all stakeholders, prior to and following installation.
|
|
4. Manage floor system outputs
|
4.1 Certify floor system design layouts in line with legislative and organisational requirements and communicate to relevant stakeholders.
4.2 Store and maintain drawings and documentation in line with organisational procedures.
|
Foundation Skills
|
This section describes those core and employment skills that are essential to performance and are not explicit in the performance criteria.
|
|
Numeracy skills to:
|
- interpret numerical data from designs and plan specifications involving area, angles and load
- input accurate numerical data into software systems.
|
|
Reading skills to:
|
- interpret detailed and unfamiliar designs, plans and technical specifications.
|
|
Writing skills to:
|
- input accurate written text into software systems
- produce accurate and detailed documents to support interpretation of drawings and assist with production and installation.
|
|
Planning and organising skills to:
|
- plan and organise own work in logical sequence and manage own timing and productivity to complete drawings and documents within deadlines.
|
|
Problem-solving skills to:
|
- recognise software design limitations and resolve.
|
|
Teamwork skills to:
|
- work as part of an internal and external design and construction team to produce compliant drawings and production documents.
|
|
Technology skills to:
|
- use a computer, keyboard and custom software to complete floor system drawings, production and installation documents.
|
Range of Conditions
Not Applicable
Unit Mapping Information
FPITMM4206A Prepare and advise on a broad range of timber floor system details using computers
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=0d96fe23-5747-4c01-9d6f-3509ff8d3d47
Assessment requirements
Modification History
|
Release
|
Comment
|
|
1
|
Replaces equivalent unit FPITMM4206A Prepare and advise on a broad range of timber floor system details using computers, which was first released with FPI11 Forest and Forest Products Training Package Version 2.2. This is the first release of this unit in the new standards format.
Assessment requirements now specify the performance and knowledge evidence, as well as assessment conditions for this unit of competency. These sections simplify and replace components used in the previous unit format, including Required Skills and Knowledge, Evidence Guide and Range Statement
|
Performance Evidence
A person demonstrating competency in this unit must satisfy all of the elements, performance criteria and foundation skills of this unit. If a specific volume or frequency is not stated below, then evidence must be provided that the following requirements have been performed on at least one occasion:
- follow organisational policies and procedures relevant to preparing and advising on a broad range of timber floor system details using computers
- prepare and advise on a broad range of timber floor system details using computers including the following
- composite systems
- I-beams
- laminated beams
- solid timber sections
- webbed truss.
Knowledge Evidence
A person competent in this unit must be able to demonstrate knowledge of:
- content and application of applicable regulations for certifying timber floor system design layouts including:
- Building Code of Australia
- Australian Standards
- organisational quality standards
- limits of personal ability and authority with respect to non-conforming design
- common industry standard sizes, profiles and spacing dimensions
- key features of these common types of floor systems:
- composite systems
- I-beams
- laminated beams
- solid timber sections
- webbed truss
- for the drawing software:
- available drawing types
- design limitations
- system functions and capabilities
- methods to input and amend design factors and other data
- methods to store and retrieve drawings
- production and installation advice including
- installation instructions to stakeholders, including floor system layouts
- certification to stakeholders
- documented advice to production
- feedback to installers
- organisational procedures specific to producing drawings and documents and advising on floor system details:
- communication reporting lines for internal and external stakeholders
- certifying floor system layouts
- filing computerised drawings and documentation
Assessment Conditions
The following resources must be made available:
- computers, keyboards and industry current software programs used to produce drawings and documentation for floor system layouts
- applicable regulations for certifying floor system layouts
- industry and organisational codes and standards for floor systems
- designs, plans and technical specifications for floor systems
- templates for developing production and installation advice
- template certification documents
- relevant personnel for the purposes of communicating information
- organisational procedures for producing drawings and documents and advising on floor system details
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessor requirements
Assessors must:
- hold the appropriate assessor competency standards as outlined in regulations; and
- be able to demonstrate vocational competencies at least to the level being assessed; and
- be able to demonstrate how they are continuing to develop their VET knowledge and skills as well as maintaining their industry currency and assessor competence.
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=0d96fe23-5747-4c01-9d6f-3509ff8d3d47
