Release 

Comment 

1

Replaces equivalent FPICOT3261 Transport forestry logs using trucks, which was first released with FPI11 Forest and Forest Products Training Package Version 2.2.

This is the first release of this unit in the new standards format.

ELEMENTS 

PERFORMANCE CRITERIA 

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1. Prepare to transport logs

1.1 Review work order and schedules and where required check with appropriate personnel.

1.2 Obtain coupe map to determine identify logging sites, truck entry, access and exit tracks and loading areas.

1.3 Determine required truck configuration to meet work order and load build requirements and confirm availability of truck and ancillary equipment.

1.4 Check transportation documentation for compliance with regulatory requirements for driving hours, load limits and dimensions.

2. Plan route

2.1 Select route and coupe entry and exits points to ensure efficient, safe and legal log movement and minimal environmental damage.

2.2 Ensure selected route complies with height, width, overhang and load limits of road infrastructure and environmental constraints.

2.3 Estimate time required to transport logs and account for fatigue management guidelines.

2.4 Confirm route, timings and coupe entry and exit points with appropriate personnel.

3. Facilitate log loading

3.1 Access site and determine safe manoeuvring approach for loading area with worksite personnel.

3.2 Position truck to avoid site and equipment hazards and to maximise load safety and security while loading.

3.3 Place and check log positioning equipment for loading, and reset as required.

3.4 Communicate with worksite personnel and machine operators to ensure safe loading location and processes and that load meets transport regulatory requirements.

3.5 Monitor loading, complete final check to ensure safe transport.

4. Secure logs prior to transport

4.1 Secure load with sufficient number and type of securing devices in line with loading guidelines and transport regulatory requirements.

4.2 Re-tension logs as required.

4.3 Fit overhang warning devices and signage to load to comply with transport regulatory requirements

5. Transport logs

5.1 Transport logs on planned or modified route considering conditions, road surfaces and fatigue management practices.

5.2 Monitor condition of tracks and roads and report unexpected ground, water, vegetation and other environmental conditions to appropriate personnel

5.3 Drive truck legally and safely using primary and subsidiary controls appropriate to conditions.

5.4 Monitor truck gauges and warning devices to detect and respond to operating faults and ensure operational safety.

5.5 Communicate with other drivers and road users to inform location and potential hazards.

5.6 Conduct periodic load safety checks and re-tension load in line with road conditions and regulatory requirements.

5.7 Keep communication channels open to ensure location is known at all times to allow for emergency assistance.

6. Facilitate log unloading

6.1 Complete site inductions and establish safe manoeuvring approach for unloading area with worksite personnel.

6.2 Follow site personnel directions to manoeuvre and park truck to avoid site and equipment hazards.

6.3 Shut down and secure truck in identified safe unloading zone.

6.4 Inspect load for log movement and make provisions to support logs requiring difficult control during release.

6.5 Release load securing devices in correct sequence for truck, trailer and load configuration and in line with site safe unloading procedures.

6.6 Make truck, trailer and ancillary equipment safe for return journey to coupe.

6.7 Record and report log shifting process and truck operating faults to appropriate personnel.

This section describes those core and employment skills that are essential to performance and are not explicit in the performance criteria.

Numeracy skills to:

• complete calculations, against regulatory specifications, of:

• heights, widths and weights of loads
• transportation distances, times and rest periods

• read and interpret truck gauges and warning devices
• record numerical data involving distances, times, weights and dimensions.

Oral communication skills to:

• ask questions and actively listen to clarify:

• contents of work orders and transport schedules
• locations of site loading and unloading areas
• unfamiliar site safety and operating procedures

• provide clear unambiguous information to site personnel about loads and any problems expected with releasing unstable logs

Reading skills to:

• interpret:

• workplace health and safety and other organisational procedures
• work orders and transport schedules
• load manifests
• transport regulations or plain English equivalent documents.

Writing skills to:

• complete accurate basic records for log shifting processes and truck operating faults.

Teamwork skills to:

• work cooperatively with site personnel and follow directions to complete safe and efficient loading and loading of logs.

Release 

Comment 

1

Replaces equivalent unit FPICOT3261 Transport forestry logs using trucks, which was first released with FPI11 Forest and Forest Products Training Package Version 2.2. This is the first release of this unit in the new standards format.

Assessment requirements now specify the performance and knowledge evidence, as well as assessment conditions for this unit of competency.  These sections simplify and replace components used in the previous unit format, including Required Skills and Knowledge, Evidence Guide and Range Statement