Qualification details

FWP30916 - Certificate III in Timber Truss and Frame Design and Manufacture (Release 2)

Summary

Releases:
ReleaseStatusRelease date
2 (this release)Current 18/Dec/2018
(View details for release 1) Replaced13/May/2016

Usage recommendation:
Current
Mapping:
MappingNotesDate
Supersedes and is equivalent to FPI30911 - Certificate III in Timber Truss and Frame Design and Manufacture 12/May/2016


Training packages that include this qualification

Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnEssential
BSBCUS301 - Deliver and monitor a service to customersDeliver and monitor a service to customers Elective
BSBCUS402 - Address customer needsAddress customer needs Elective
BSBFLM305 - Support operational planSupport operational plan Elective
BSBFLM312 - Contribute to team effectivenessContribute to team effectiveness Core
BSBINM301 - Organise workplace informationOrganise workplace information Elective
CPCCBC4001A - Apply building codes and standards to the construction process for low rise building projectsApply building codes and standards to the construction process for low rise building projects Elective
CPCCBC4014A - Prepare simple building sketches and drawingsPrepare simple building sketches and drawings Elective
CPCCCM1015A - Carry out measurements and calculationsCarry out measurements and calculations Elective
FWPCOR2201 - Work effectively in the forest and forest products industryWork effectively in the forest and forest products industry Core
FWPCOR2202 - Communicate and interact effectively in the workplaceCommunicate and interact effectively in the workplace Core
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 45

Classifications

SchemeCodeClassification value
ANZSCO Identifier 331200 Carpenters And Joiners 
ASCED Qualification/Course Field of Education Identifier 0403 Building 
Qualification/Course Level of Education Identifier 514 Certificate III 
Taxonomy - Industry Sector N/A Timber Manufacturing 
Taxonomy - Occupation N/A Truss and Frame Designer,Truss and Frame Production Fabricator 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 331200 Carpenters And Joiners 14/Oct/2016 
ASCED Qualification/Course Field of Education Identifier 0403 Building 14/Oct/2016 
Qualification/Course Level of Education Identifier 514 Certificate III 13/May/2016 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Release 

Comments 

Release 2

This version released with FWP Forest and Wood Products Training Package Version 4.0.

Release 1

This version released with FWP Forest and Wood Products Training Package Version 2.0.

Qualification Description

This qualification is designed for job roles in the timber truss and frame sector of the forest and forest products industry.

The outcome of this qualification can satisfy entry requirements into FWP40416 Certificate IV in Timber Truss and Frame Design by completing the following elective units:

  • FWPCOT3204 Prepare and interpret sketches and drawings
  • FWPCOT3214 Take off material quantities
  • FWPCOT3218 Quote and interpret from manufactured timber product plans
  • FWPCOT3220 Quote and interpret from computerised timber manufactured product plans
  • FWPCOT3239 Create drawings using computer aided design systems

Plus at least one of the following specialist design units:

  • FWPTMM3204 Interpret designs to prepare timber roof truss drawings and documents using computers
  • FWPTMM3205 Interpret designs to prepare timber floor system drawings and documents using computers
  • FWPTMM3206 Interpret designs to prepare timber wall frame drawings and documents using computers

Job roles 

This qualification satisfies employment pathways for typical operational environments of timber truss and frame design, including:

  • Designer (Timber truss and frame)
  • Production fabricator (Timber truss and frame)

Licensing, legislative, regulatory, or certification requirements may apply to units in this qualification in some states & territories at the time of publication and may differ according to jurisdiction.

Some imported units in the elective bank may be subject to licensing, legislative, regulatory, or certification requirements. These units must be implemented in line with the licensing requirements outlined in the unit s parent Training Package.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

To achieve this qualification, competency must be demonstrated in:

  • 13 units of competency:
  • 5 core units plus
  • 8 elective units.

Elective units must ensure the integrity of the qualification s Australian Qualification Framework (AQF) alignment and contribute to a valid, industry-supported vocational outcome. The electives are to be chosen as follows:

  • 8 units of competency from the elective groups A, B or C, the total of which can include up to 2 units recommended for packaging at Certificate II, Certificate III or Certificate IV in any endorsed Training Package or State/Territory accredited course

Elective units must be relevant to work undertaken in the timber truss and frame sector of the industry.

Core Units 

BSBFLM312

Contribute to team effectiveness

FWPCOR2201

Work effectively in the forest and forest products industry

FWPCOR2202

Communicate and interact effectively in the workplace

FWPCOR3201

Implement safety, health and environment policies and procedures

FWPCOR3202

Conduct quality and product care procedures

Elective Units 

Group A 

Specialist Design 

FWPTMM3204

Interpret designs to prepare timber roof truss drawings and documents using computers

FWPTMM3205

Interpret designs to prepare timber floor system drawings and documents using computers

FWPTMM3206

Interpret designs to prepare timber wall frame drawings and documents using computers

Group B 

Forest 

FWPCOT3204

Prepare and interpret sketches and drawings

FWPCOT3214

Take off material quantities

FWPCOT3218

Quote and interpret from manufactured timber product plans

FWPCOT3220

Quote and interpret from computerised timber manufactured product plans

FWPCOT3239

Create drawings using computer aided design systems

FWPCOT4202

Design timber structures

Construction 

CPCCBC4001A

Apply building codes and standards to the construction process for low rise building projects

Group C 

Forest 

FWPCOR3204

Visually assess materials

FWPCOT2235

Assess timber for manufacturing potential

FWPCOT3234

Cut material using CNC sizing machines

FWPCOT3235

Machine material using CNC machining and processing centres

FWPCOT3236

Coordinate stock control procedures

FWPCOT3241

Assemble timber wall frames

FWPCOT3242

Lay up timber roof trusses

FWPCOT3243

Operate a truss press

FWPCOT3264

Build and maintain timber stacks

FWPCOT4203

Plan and coordinate product assembly

FWPCOT4204

Schedule and coordinate load shifting

FWPTMM2203

Read and interpret timber truss, floor and/or frame fabrication plans

FWPTMM3207

Set up timber floor trusses

Business 

BSBCUS301

Deliver and monitor a service to customers

BSBCUS402

Address customer needs

BSBFLM305

Support operational plan

BSBINM301

Organise workplace information

Construction 

CPCCBC4014A

Prepare simple building sketches and drawings

CPCCCM1015A

Carry out measurements and calculations

FWPTMM3209

Install prefabricated timber building systems on-site

Health and Safety 

HLTAID003

Provide first aid

HLTAID006

Provide advanced first aid

Manufacturing 

FWPCOT3263

Maintain and contribute to energy efficiency

FWPTMM3208

Apply critical workplace processes in the manufacture of prefabricated timber building systems

MSMSUP390

Use structured problem-solving tools

MSS402001

Apply competitive systems and practices

MSS403032

Analyse manual handling processes

MSS403087

Mistake proof an operational process

Training 

TAEDEL301

Provide work skill instruction

Transport 

TLIA3018

Organise despatch operations

Qualification Mapping Information

Code and title current version 

Code and title previous version 

Comments 

Equivalence status 

FWP30916 Certificate III in Timber Truss and Frame Design and Manufacture

Release 2

FWP30916 Certificate III in Timber Truss and Frame Design and Manufacture

Release 1

Updated to include revised units and superseded and deleted imported units

Equivalent qualification

Links

Companion Volumes, including Implementation Guides, are available at VETNet: - https://vetnet.education.gov.au/Pages/TrainingDocs.aspx?q=0d96fe23-5747-4c01-9d6f-3509ff8d3d47

Training component details
The following details are displayed for each different NRT:-

Training packages

- Training package details
- Training package components

Qualifications

- Qualification details
- Qualification components

Accredited courses

- Accredited course details

Modules

- Module details

Units of competency

- Units of competency details
- Unit components

Skill sets

- Skill set details
- Skill set components

Click on the Export link to export the NRT information to MS Word or PDF.

Click on the Manage notification link to create or change a notification for this NRT.

When selecting the Display history check box a set of tables will appear displaying a log of historical values describing what has changed and when over time.

If you have access to make changes to an NRT, click on the Edit link on the upper right hand side of the summary box.