Modification History
Release |
Comments |
Release 4 |
This version released with FWP Forest and Wood Products Training Package Version 6.0. |
Release 3 |
This version released with FWP Forest and Wood Products Training Package Version 5.0. |
Release 2 |
This version released with FWP Forest and Wood Products Training Package Version 3.0. |
Release 1 |
This version released with FWP Forest and Wood Products Training Package Version 2.0. |
Qualification Description
This qualification is designed for job roles in the wood panel products sector of the forest and forest products industry.
This qualification has three employment pathways for typical operational environments of wood panel products. These are:
- Production Worker (Laminates)
- Production Worker (Panel and Board)
- Production Worker (Veneer)
Some imported units in the elective bank may be subject to licensing, legislative, regulatory, or certification requirements. These units must be implemented in line with the licensing requirements outlined in the unit’s parent Training Package.
Entry Requirements
There are no entry requirements for this qualification.
Packaging Rules
To achieve this qualification, competency must be demonstrated in:
- 13 units of competency:
- 5 core units plus
- 8 elective units.
Elective units must ensure the integrity of the qualification’s Australian Qualification Framework (AQF) alignment and contribute to a valid, industry-supported vocational outcome. The electives are to be chosen as follows:
- 3 from Group A electives listed below
- 5 from Group A and/or Group B electives listed below, the total of which can include up to 2 units recommended for packaging at Certificate I, II or III level from this or any other endorsed Training Package or state/territory accredited course.
Core Units
FWPCOR2201 |
Work effectively in the forest and forest products industry |
FWPCOR2202 |
Communicate and interact effectively in the workplace |
FWPCOR2203 |
Follow environmental care procedures |
FWPCOR2205 |
Follow WHS policies and procedures |
FWPCOR2207 |
Maintain quality and product care |
Elective Units
An asterisk (*) next to the unit code indicates that there are prerequisite requirements which must be met when packaging the qualification. Please refer to the Prerequisite requirements table for details.
Group A
Logyard and/or Material Preparation
FWPCOT2226 |
Debark logs mechanically |
FWPCOT2263 |
Cross cut materials with a fixed saw |
Veneer/Board Production
FWPCOT2202 |
Rack material |
FWPCOT2243 |
Tail out timber product and waste material |
FWPCOT2244 |
Operate and maintain a thicknesser |
FWPCOT2262 |
Cut material to shape using a saw |
FWPWPP2202 |
Surface treat raw board |
FWPWPP2203 |
Repair veneer and ply |
FWPWPP2204 |
Repair veneer mechanically |
FWPWPP2206 |
Prepare veneer for ply |
FWPWPP2207 |
Scarf edges of veneer |
FWPWPP2208 |
Cut veneer |
FWPWPP2209 |
Saw products from continuous ply |
FWPWPP2212 |
Cut panels to profile |
FWPWPP2213 |
Cut panels |
Lamination and Finishing
FWPCOT2203 |
Finish and pack products |
FWPCOT2222 |
Produce laminated beams |
FWPCOT2252 |
Band edges of panels |
FWPCOT2258 |
Assemble products |
Grading and Testing
FWPCOT2225 |
Chip or flake wood |
FWPCOT2247 |
Appearance grade softwood sawn and milled products |
Woodchipping
FWPWPP2205 |
Prepare chip or fibre blends |
Group B
Warehousing and Distribution
FWPCOT2206 |
Stack and bind material |
FWPCOT2231 |
Pack products |
FWPCOT2255 |
Store materials |
FWPCOT2260 |
Tally material |
FWPCOT2261 |
Process orders and prepare for despatch |
FWPCOT3320 |
Build and maintain timber stacks |
TLIF1002 |
Conduct housekeeping activities |
Load Handling
AHCMOM207 |
Conduct front-end loader operations |
FWPWPP2211 |
Move material by transfer equipment |
TLID0006 |
Move materials mechanically using automated equipment |
TLID1001 |
Shift materials safely using manual handling methods |
TLID2004 |
Load and unload goods/cargo |
TLID2010 |
Operate a forklift |
TLID2047 |
Prepare cargo for transfer with slings |
TLILIC0003 |
Licence to operate a forklift truck |
Machinery and Equipment
FWPCOT2240 |
Cut material with a pole saw |
FWPCOT2254 |
Maintain chainsaws |
FWPCOT2257 |
Use hand-held tools |
MEM11011* |
Undertake manual handling |
MEM18011* |
Shut down and isolate machines/equipment |
Safety and Quality Processes
FWPCOT3263 |
Maintain and contribute to energy efficiency |
HLTAID011 |
Provide First Aid |
MEM13015 |
Work safely and effectively in manufacturing and engineering |
Administration and Business
BSBINS201 |
Process and maintain workplace information |
BSBTEC201 |
Use business software applications |
Competitive Manufacturing
MSS402001 |
Apply competitive systems and practices |
Communication and Relationships
FWPCOT3302 |
Access and provide timber and wood product information |
MEM16006* |
Organise and communicate information |
SIRXCEG001 |
Engage the customer |
Prerequisite requirements
Units listed in the Prerequisite requirement column that have their own prerequisite requirements are shown with an asterisk (*)
Unit of competency |
Prerequisite requirement |
MEM11011 Undertake manual handling |
MEM13015 Work safely and effectively in manufacturing and engineering MEM16006 Organise and communicate information* |
MEM16006 Organise and communicate information |
MEM13015 Work safely and effectively in manufacturing and engineering |
MEM18011 Shut down and isolate machines/equipment |
MEM11011 Undertake manual handling* MEM13015 Work safely and effectively in manufacturing and engineering MEM16006 Organise and communicate information* |
Qualification Mapping Information
Code and title current version |
Code and title previous version |
Comments |
Equivalence status |
FWP20416 Certificate II in Wood Panel Products Release 4 |
FWP20416 Certificate II in Wood Panel Products Release 3 |
Updated to include revised FWP elective units |
Equivalent |
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=0d96fe23-5747-4c01-9d6f-3509ff8d3d47