Modification History
|
Release |
Comments |
|
Release 5 |
This version released with FWP Forest and Wood Products Training Package Version 6.1. |
|
Release 4 |
This version released with FWP Forest and Wood Products Training Package Version 6.0. |
|
Release 3 |
This version released with FWP Forest and Wood Products Training Package Version 5.0. |
|
Release 2 |
This version released with FWP Forest and Wood Products Training Package Version 3.0. |
|
Release 1 |
This version released with FWP Forest and Wood Products Training Package Version 2.0. |
Qualification Description
This qualification is designed for job roles in the sawmilling and processing sector of the forest and forest products industry.
This qualification has seven employment pathways for typical operational environments in sawmilling and processing. These are:
- Kiln Worker
- Timber Grader
- Treatment Plant Worker
- Production Worker
- Sawmill Worker
- Saw Technician
- Wood Machinist
Some imported units in the elective bank may be subject to licensing, legislative, regulatory, or certification requirements. These units must be implemented in line with the licensing requirements outlined in the unit’s parent Training Package.
Entry Requirements
There are no entry requirements for this qualification.
Packaging Rules
To achieve this qualification, competency must be demonstrated in:
- 13 units of competency:
- 5 core units plus
- 8 elective units.
Elective units must ensure the integrity of the qualification’s Australian Qualification Framework (AQF) alignment and contribute to a valid, industry-supported vocational outcome. The electives are to be chosen as follows:
- 3 from Group A electives listed below
- 5 from Group A and/or Group B electives listed below, the total of which can include up to 2 units recommended for packaging at Certificate I, II or III level from this or any other currently endorsed Training Package or accredited course.
Core Units
|
FWPCOR2201 |
Work effectively in the forest and forest products industry |
|
FWPCOR2202 |
Communicate and interact effectively in the workplace |
|
FWPCOR2203 |
Follow environmental care procedures |
|
FWPCOR2205 |
Follow WHS policies and procedures |
|
FWPCOR2207 |
Maintain quality and product care |
Elective Units
An asterisk (*) next to the unit code indicates that there are prerequisite requirements which must be met when packaging the qualification. Please refer to the Prerequisite requirements table for details.
Group A
Logyard and/or Material Preparation
|
FWPCOT3203 |
Weigh loads |
Sawing Operations
|
FWPCOT2202 |
Rack material |
|
FWPCOT2234 |
Dock material to length |
|
FWPCOT2243 |
Tail out timber product and waste material |
|
FWPCOT2245 |
Operate and maintain a table saw |
|
FWPCOT2259 |
Cut materials with a hand-held chainsaw |
|
FWPCOT2263 |
Cross cut materials with a fixed saw |
|
FWPCOT3271 |
Hand sharpen knives and blades for commercial and domestic cutting services |
|
FWPCOT3276 |
Sharpen cutters using a straight knife grinder |
|
FWPCOT3290 |
Apply knowledge of timber properties, sawmill operations and sawmilling equipment |
|
FWPSAW2202 |
Sort boards manually |
|
FWPSAW2204 |
Dock boards with mechanical feed |
|
FWPSAW2209 |
Dismantle, transport and assemble hand portable sawmill |
|
FWPSAW3247 |
Replace tungsten tips |
Grading and Testing
|
FWPCOT2246 |
Appearance grade hardwood sawn and milled products |
|
FWPCOT2249 |
Visually stress grade hardwood |
|
FWPCOT2250 |
Visually stress grade softwood |
|
FWPCOT2251 |
Visually stress grade cypress |
|
FWPSAW2201 |
Grade round poles and debarked logs |
Timber Products
|
FWPCOT2209 |
Produce finger jointed timber |
|
FWPCOT2244 |
Operate and maintain a thicknesser |
|
FWPCOT2258 |
Assemble products |
|
FWPCOT3302 |
Access and provide timber and wood product information |
|
FWPSAW2206 |
De-stack seasoning racks |
|
FWPSAW2212 |
Assemble materials using nail plates |
Timber Drying and Treatment
|
AHCCHM201 |
Apply chemicals under supervision |
Group B
Warehousing and Distribution
|
FWPCOT2206 |
Stack and bind material |
|
FWPCOT2231 |
Pack products |
|
FWPCOT2255 |
Store materials |
|
FWPCOT2260 |
Tally material |
|
FWPCOT2261 |
Process orders and prepare for despatch |
|
FWPCOT3320 |
Build and maintain timber stacks |
|
TLIF1002 |
Conduct housekeeping activities |
Machinery and Equipment
|
FWPCOT2240 |
Cut material with a pole saw |
|
FWPCOT2254 |
Maintain chainsaws |
|
FWPCOT2257 |
Use hand-held tools |
|
FWPCOT3259 |
Operate a four wheel drive on unsealed roads |
|
MEM05006* |
Perform brazing and/or silver soldering |
|
MEM11011* |
Undertake manual handling |
|
MEM18011* |
Shut down and isolate machines/equipment |
Load Handling
|
AHCMOM207 |
Conduct front-end loader operations |
|
TLIC2002 |
Drive light rigid vehicle |
|
TLIC3003 |
Drive medium rigid vehicle |
|
TLID0006 |
Move materials mechanically using automated equipment |
|
TLID0007 |
Operate specialised load shifting equipment |
|
TLID1001 |
Shift materials safely using manual handling methods |
|
TLID2004 |
Load and unload goods/cargo |
|
TLID2010 |
Operate a forklift |
|
TLID2047 |
Prepare cargo for transfer with slings |
|
TLILIC0003 |
Licence to operate a forklift truck |
Safety & Quality Processes
|
AHCWRK312 |
Operate in isolated and remote situations |
|
FWPCOT2233 |
Navigate in forest areas |
|
FWPCOT3263 |
Maintain and contribute to energy efficiency |
|
HLTAID011 |
Provide First Aid |
|
MEM13015 |
Work safely and effectively in manufacturing and engineering |
Administration & Business
|
BSBINS201 |
Process and maintain workplace information |
|
BSBTEC201 |
Use business software applications |
Competitive Manufacturing
|
MSS402001 |
Apply competitive systems and practices |
Communication & Relationships
|
MEM16006* |
Organise and communicate information |
|
SIRXCEG001 |
Engage the customer |
Prerequisite requirements
Units listed in the Prerequisite requirement column that have their own prerequisite requirements are shown with an asterisk (*)
|
Unit of competency |
Prerequisite requirement |
|
MEM05006 Perform brazing and or silver soldering |
MEM11011 Undertake manual handling* MEM13015 Work safely and effectively in manufacturing and engineering MEM16006 Organise and communicate information |
|
MEM11011 Undertake manual handling |
MEM13015 Work safely and effectively in manufacturing and engineering MEM16006 Organise and communicate information* |
|
MEM16006 Organise and communicate information |
MEM13015 Work safely and effectively in manufacturing and engineering |
|
MEM18011 Shut down and isolate machines/equipment |
MEM11011 Undertake manual handling* MEM13015 Work safely and effectively in manufacturing and engineering MEM16006 Organise and communicate information* |
Qualification Mapping Information
|
Code and title current version |
Code and title previous version |
Comments |
Equivalence status |
|
FWP20316 Certificate II in Sawmilling and Processing Release 5 |
FWP20316 Certificate II in Sawmilling and Processing Release 4 |
Qualification updated to remove eleven elective units that have been deleted as part of meeting Skills Ministers’ priority of removing training products with low or no enrolments, as agreed by the AISC |
Equivalent |
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=0d96fe23-5747-4c01-9d6f-3509ff8d3d47
